Power Seats; To Reset The Seat To Its Normal Stopping Position - Lincoln NAVIGATOR 2015 Owner's Manual

132

POWER SEATS

WARNING: Before returning the seatback to its original position,
make sure that cargo or any objects are not trapped behind the
seatback.
WARNING: Never adjust the driver seat or seatback when the
vehicle is moving. This may result in sudden seat movement,
causing loss of control of your vehicle.
Power Recline
Note: On vehicles with memory seats, to prevent damage to the seat,
the power seats are designed to set a stopping position just short of the
end of the seat track. If the seat encounters an object while moving
forward or backward, a new stopping position will be set.

To reset the seat to its normal stopping position:

1. After encountering the new stopping position, press the power seat
control again to override.
2. Continue pressing the control until it reaches the end of the seat
track.
3. Continue pressing the control for about two seconds. You will feel the
seat bounce back slightly.
Seats
The control is located on the
outboard side of the seat. Move the
switch in the direction of the arrow
to raise or lower the seat cushion or
to move the seat forward, backward,
up or down.
Move the switch to recline the
seatback forward or rearward.