Replacing Hid Headlamp Bulbs; Replacing Tail, Stop, Turn Signal, And Backup Lamp Bulbs; Replacing Supplemental Tail Lamp Bulbs; Replacing License Plate Lamp Bulbs - Lincoln NAVIGATOR 2015 Owner's Manual

278

Replacing HID Headlamp Bulbs

The low/high beam headlamps on your vehicle use a "high intensity
discharge" source. These lamps operate at a high voltage. For bulb
replacement, see your authorized dealer.
Replacing Front Parking Lamp, Turn Signal, and Side Marker Bulbs
These lamps are designed with LED light sources. For replacement, see
your authorized dealer.

Replacing Tail, Stop, Turn Signal, and Backup Lamp Bulbs

These lamps are designed with LED light sources. For replacement, see
your authorized dealer.

Replacing Supplemental Tail Lamp Bulbs

These lamps are designed with LED light sources. For replacement, see
your authorized dealer.

Replacing License Plate Lamp Bulbs

The license plate bulbs are located above the license plate on the
liftgate. To change the license plate bulbs:
5. Install the bulb socket in the lamp assembly by turning it clockwise.
6. Install the lamp assembly and secure it with the retaining screw.
Maintenance
1. Make sure the headlamp switch is
in the off position.
2. Remove the license lamp screw
from the assembly.
3. Pull the lamp down and twist the
bulb socket counterclockwise.
Remove the bulb socket from the
lamp.
4. Pull out the old bulb and push in
the new bulb.