Page 1 2 0 1 5 N A V I G A T O R O w n e r ’ s M a n u a l lincolnowner.com lincolncanada.com July 2014 First Printing Owner’s Manual Lincoln Navigator Litho in U.S.A. FL7J 19A321 AA...
Page 2: Table Of Contents
Table of Contents Introduction Child Safety Installing child seats ........19 Booster seats .
Page 3 Table of Contents Locks Locking and unlocking ........67 SecuriCode™...
Page 4: Table Of Contents
Table of Contents Instrument Cluster Gauges..........100 Warning lamps and indicators .
Page 5 Table of Contents Fuel and Refueling Fuel quality .........163 Refueling .
Page 6: Table Of Contents
Table of Contents Driving Aids Blind Spot Information System (BLIS) with Cross Traffic Alert (CTA) ..........204 Steering .
Page 7 Table of Contents Maintenance General information ........260 Opening and closing the hood .
Page 8: Table Of Contents
Table of Contents Wheels and Tires Tire care ......... . .294 Tire Pressure Monitoring System (TPMS) .
Page 9 Table of Contents Appendices Scheduled Maintenance Normal scheduled maintenance and log .....449 Index The information contained in this publication was correct at the time of going to print.
Page 10: Introduction
Introduction ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it.
Page 11 Introduction SYMBOL GLOSSARY These are some of the symbols you may see on your vehicle. Symbol Description Symbol Description Symbol Description Safety alert See Owner’s Anti-lock Manual braking system Avoid Battery Battery acid smoking, flames, or sparks Brake fluid – Brake system Cabin air filter...
Page 12 Introduction Symbol Description Symbol Description Symbol Description Lighting Low tire Maintain control pressure correct fluid warning level Panic alarm Parking aid Parking system brake system Power Power Power steering fluid windows window front and lockout rear Service Side airbag Stability engine soon control Windshield...
Page 13 Introduction Event Data Recording This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle; this data will assist in understanding how a vehicle’s systems performed.
Page 14 Introduction Note: Including to the extent that any law pertaining to Event Data Recorders applies to SYNC® or its features, please note the following: Once 911 Assist (if equipped) is enabled (set ON), 911 Assist may, through any paired and connected cell phone, disclose to emergency services that the vehicle has been in a crash involving the deployment of an airbag or, in certain vehicles, the activation of the fuel pump shut-off.
Page 15 Introduction LINCOLN AUTOMOTIVE FINANCIAL SERVICES (U.S. ONLY) Lincoln Automotive Financial Services offers a full range of financing and lease plans to help you acquire your vehicle. If you have financed or leased your vehicle through Lincoln Automotive Financial Services, thank you for your business.
Page 16 Introduction SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered by your vehicle’s New Vehicle Limited Warranty, see the warranty information that is provided to you along with your owner’s manual. Special Instructions For your added safety, your vehicle is fitted with sophisticated electronic controls.
Page 17 Introduction MOBILE COMMUNICATIONS EQUIPMENT Using mobile communications equipment is becoming increasingly important in the conduct of business and personal affairs. However, you must not compromise your own or others’ safety when using such equipment. Mobile communications can enhance personal safety and security when appropriately used, particularly in emergency situations.
Page 18: Child Safety
Child Safety GENERAL INFORMATION See the following sections for directions on how to properly use safety restraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your vehicle.
Page 19 Child Safety Recommendations for Safety Restraints for Children Child size, height, weight, or Recommended restraint type Infants Children weighing 40 lb (18 kg) or Use a child safety seat less (generally age four or (sometimes called an toddlers younger). infant carrier, convertible seat, or toddler seat).
Page 20: Installing Child Seats
Child Safety INSTALLING CHILD SEATS Child Seats Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat) for infants, toddlers or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). Using Lap and Shoulder Belts WARNING: Airbags can kill or injure a child in a child seat.
Page 21 Child Safety • Keep the buckle release button pointing up and away from the safety seat, with the tongue between the child seat and the release button, to prevent accidental unbuckling. • Place the vehicle seat upon which the child seat will be installed in the upright position.
Page 22 Child Safety 3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions. Be sure the belt webbing is not twisted. 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until...
Page 23 Child Safety 8. Remove remaining slack from the belt. Force the seat down with extra weight, for example, by pressing down or kneeling on the child restraint while pulling up on the shoulder belt in order to force slack from the belt. This is necessary to remove the remaining slack that will exist once the extra weight of the child is added to the child restraint.
Page 24 Child Safety Using Lower Anchors and Tethers for CHildren (LATCH) WARNING: Never attach two child safety seats to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injury or death.
Page 25 Child Safety The LATCH anchors are located at the rear section of the rear seat between the cushion and seatback, below the locator symbols on the seatback. Follow the child seat manufacturer’s instructions to properly install a child seat with LATCH attachments. The locator symbols are on round plastic buttons for the center seat and on rectangular tags for the outboard seats.
Page 26 Child Safety Using Tether Straps Many forward-facing child safety seats include a tether strap which extends from the back of the child safety seat and hooks to an anchoring point called the top tether anchor. Tether straps are available as an accessory for many older safety seats. Contact the manufacturer of your child seat for information about ordering a tether strap, or to obtain a longer tether strap if the tether strap on your safety seat does not reach the appropriate top tether...
Page 27 Child Safety If you install a child seat with rigid LATCH attachments, and have attached the top tether strap to the proper top tether anchor, do not tighten the tether strap enough to lift the child seat off the vehicle seat cushion when the child is seated in it.
Page 28 Child Safety 3. Grasp the tether strap and position it to the seat frame. 4. Rotate the tether strap, and clip the tether strap to the anchor on the seat frame. 5. Rotate the tether strap clip. 6. Tighten the child safety seat tether strap according to the manufacturer’s instructions.
Page 29 Child Safety Third row center seating position 1. Route the child safety seat tether strap over the back of the seat. 2. Locate the anchor webbing loop for the seating position. • You may need to pull back the top of the hinged panel along the bottom of the seat back to access the tether anchor.
Page 30: Booster Seats
Child Safety 4. Tighten the child safety seat tether strap according to the manufacturer’s instructions. If the safety seat is not anchored properly, the risk of a child being injured in a crash greatly increases. If your child restraint system is equipped with a tether strap, and the child restraint manufacturer recommends its use, Ford also recommends its use.
Page 31 Child Safety • Does the lap belt rest low across the hips? • Is the shoulder belt centered on the shoulder and chest? • Can the child stay seated like this for the whole trip? Always use booster seats in conjunction with your vehicle lap and shoulder belt.
Page 32 Child Safety Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder.
Page 33: Child Seat Positioning
Child Safety CHILD SEAT POSITIONING WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the vehicle seat upon which the child seat is installed all the way back.
Page 34: Child Safety Locks
Child Safety Recommendations for attaching child safety restraints for children Use any attachment method as indicated below by X. LATCH LATCH Safety Safety Safety Combined (lower (lower belt belt and belt Restraint weight of anchors anchors LATCH only Type child and and top only) (lower...
Page 35: Safety Belts
Safety Belts PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving.
Page 36 Safety Belts WARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. WARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather;...
Page 37: Fastening The Safety Belts
Safety Belts FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle are combination lap and shoulder belts. 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch.
Page 38 Safety Belts Pregnant women should always wear their safety belts. The lap belt portion of a combination lap and shoulder belt should be positioned low across the hips below the belly and worn as tight as comfort will allow. The shoulder belt should be positioned to cross the middle of the shoulder and the center of the chest.
Page 39 Safety Belts Automatic Locking Mode In this mode, the shoulder belt is automatically pre-locked. The belt will still retract to remove any slack in the shoulder belt. The automatic locking mode is not available on the driver safety belt. When to Use the Automatic Locking Mode This mode should be used any time a child safety seat, except a booster, is installed in passenger front or rear seating positions.
Page 40: Safety Belt Height Adjustment
Safety Belts SAFETY BELT HEIGHT ADJUSTMENT WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a crash. Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder.
Page 41: Safety Belt Warning Light And Indicator Chime
Safety Belts To adjust the comfort guide: 1. Slip the shoulder belt into the belt guide (the portion of the belt between the latch tongue and the D-ring, not the portion where the belt exits from the quarter trim panel). 2.
Page 42: Safety Belt-Minder
Safety Belts SAFETY BELT-MINDER™ This feature supplements the safety belt warning function by providing additional reminders that intermittently sound a tone and illuminate the safety belt warning light when you are in the driver seat and the safety belt is unbuckled. If...
Page 43: Child Restraint And Safety Belt Maintenance
Safety Belts • The ignition is off. • All vehicle doors are closed. • The driver safety belt is unbuckled. 1. Switch the ignition on. Do not start the vehicle. 2. Wait until the safety belt warning light turns off (about 1 to 2 minutes).
Page 44: Supplementary Restraints System
Supplementary Restraints System PRINCIPLES OF OPERATION WARNING: Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. WARNING: All occupants of your vehicle, including the driver, should always properly wear their safety belts, even when an airbag supplemental restraint system is provided.
Page 45 Supplementary Restraints System The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries. Airbags do not inflate slowly; there is a risk of injury from a deploying airbag. Note: You will hear a loud bang and see a cloud of harmless powdery residue if an airbag deploys.
Page 46: Driver And Passenger Airbags
Supplementary Restraints System • Restraints control module with impact and safing sensors. • Restraint system warning light and backup tone. • The electrical wiring for the airbags, crash sensor(s), safety belt pretensioners, front safety belt usage sensors, driver seat position sensor, and indicator lights.
Page 47 Supplementary Restraints System The driver and front passenger airbags will deploy during significant frontal and near frontal crashes. The driver and passenger front airbag system consists of: • Driver and passenger airbag modules. • Crash sensors and monitoring system with readiness indicator.
Page 48: Side Airbags
Supplementary Restraints System Children and Airbags WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the seat upon which the child seat is installed all the way back.
Page 49 Supplementary Restraints System WARNING: If the side airbag has deployed, the airbag will not function again. The side airbag system (including the seat) must be inspected and serviced by an authorized dealer. If the airbag is not replaced, the unrepaired area will increase the risk of injury in a crash. The side airbags are located on the outboard side of the seatbacks of the front seats.
Page 50: Safety Canopy Curtain Airbags
Supplementary Restraints System SAFETY CANOPY™ CURTAIN AIRBAGS WARNING: Do not place objects or mount equipment on or near the headliner at the siderail that may come into contact with a deploying curtain airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash. WARNING: Do not lean your head on the door.
Page 51 Supplementary Restraints System The Safety Canopy will deploy during significant side crashes or when a certain likelihood of a rollover event is detected by the rollover sensor. The Safety Canopy is mounted to the roof side-rail sheet metal, behind the headliner, above each row of seats. In certain sideways crashes or rollover events, the Safety Canopy will be activated, regardless of which seats are occupied.
Page 52: Crash Sensors And Airbag Indicator
Supplementary Restraints System CRASH SENSORS AND AIRBAG INDICATOR WARNING: Modifying or adding equipment to the front end of your vehicle (including frame, bumper, front end body structure and tow hooks) may affect the performance of the airbag system, increasing the risk of injury. Do not modify the front end of your vehicle.
Page 53: Airbag Disposal
Supplementary Restraints System The fact that the safety belt pretensioners or airbags did not activate for both front seat occupants in a crash does not mean that something is wrong with the system. Rather, it means the restraints control module determined the accident conditions (for example, crash severity, belt usage) were not appropriate to activate these safety devices.
Page 54: Keys And Remote Control
Keys and Remote Control PRINCIPLE OF OPERATION The remote control allows you to: • remotely lock or unlock the vehicle doors. • remotely open the power liftgate. • remotely start or stop the engine. • arm and disarm the anti-theft system. •...
Page 55: Remote Control
Keys and Remote Control Intelligent Access The system uses a radio frequency signal to communicate with your vehicle and authorize your vehicle to unlock when one of the following conditions is met: • You touch any button on the keypad. •...
Page 56 Keys and Remote Control Replacing the Battery Note: Refer to local regulations when disposing of transmitter batteries. Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board. Note: Replacing the battery will not delete the transmitter from your vehicle.
Page 57 Keys and Remote Control Memory feature This feature allows you to recall the driver seat, power mirrors, power steering column and adjustable foot pedals memory positions. Press the unlock button on the remote control to recall memory positions. Programming memory to the remote control To activate this feature: 1.
Page 58 Keys and Remote Control Car Finder Press the button twice within three seconds. The horn will sound and the turn signals will flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm. Sounding a Panic Alarm Press the button to activate the alarm.
Page 59 Keys and Remote Control Remote Starting the Vehicle Note: You must press each button within three seconds of each other. Your vehicle will not remote start and the horn will not sound if you do not follow this sequence. The label on your transmitter details the starting procedure.
Page 60: Replacing A Lost Key Or Remote Control
Keys and Remote Control Turning the Vehicle Off After Remote Starting Press the button once. The parking lamps will turn off. You may have to be closer to your vehicle than when starting due to ground reflection and the added noise of the running vehicle. You can disable or enable the remote start system through the information display.
Page 61: Mykey
MyKey PRINCIPLES OF OPERATION MyKey allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to the vehicle can be activated with these restricted modes. Any keys that have not been programmed are referred to as administrator keys or admin keys.
Page 62: Creating
MyKey • Audio system maximum volume of 45% for some audio systems. A message will be shown in the display when you attempt to exceed the limited volume. Also, the speed-sensitive or compensated automatic volume control will be disabled. • Always on setting. When this is selected, you will not be able to turn off certain features.
Page 63: Clearing
MyKey CLEARING ALL MYKEYS You can clear all MyKeys within the same key cycle as you created the MyKey. If you switch your ignition off, however, you will need to use an admin key to clear your MyKeys. Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once.
Page 64 MyKey USING MYKEY WITH REMOTE START SYSTEMS MyKey is not compatible with non-Ford-approved aftermarket remote start systems. If you choose to install a remote start system, please see your Ford authorized dealer for a Ford-approved remote start system . Vehicles With Ford-approved Aftermarket Remote Start Systems When using a Ford-approved aftermarket remote start system, the vehicle recognizes the remote start system as an additional admin key.
Page 65 MyKey Vehicles With Non-Ford-approved Aftermarket Remote Start Systems MyKey is not compatible with non-Ford-approved aftermarket remote start systems. If you choose to install a remote start system, please see a Ford authorized dealer for a Ford-approved system. The following information may help customers who choose to install a non-Ford-approved remote start system.
Page 66 MyKey MYKEY TROUBLESHOOTING Condition Potential causes • The key or fob used to start the vehicle I cannot create a MyKey. does not have admin privileges. • The key or fob used to start the vehicle is the only admin key (there always has to be at least one admin key).
Page 67 MyKey Condition Potential causes • Purchase a new key from your authorized I lost the only admin key. dealer. • Program a spare key. See SecuriLock in the I lost a key. Security chapter. • The vehicle has a remote start system that I accidentally programmed all keys is recognized as an admin key.
Page 68: Locks
Locks LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lock and unlock your vehicle. Power Door Locks A. Unlock B. Lock Remote Control You can use the remote control anytime your vehicle is not running. Unlocking the Doors (Two-Stage Unlock) Press the button to unlock the driver door.
Page 69 Locks Activating Intelligent Access (If Equipped) You must have the intelligent access key within 3 feet (1 meter) of the driver’s door. At the Front Driver Door Press any number on the SecuriCode keyless entry keypad. After locking the doors with the lock sensor, there is a brief delay before you can unlock your vehicle.
Page 70 Locks Autolock Feature (If Enabled) The autolock feature will lock all the doors when: • all the doors are closed, • the ignition is on, • you shift into any gear putting your vehicle in motion, and • your vehicle reaches a speed greater than 12 mph (20 km/h). The autolock feature repeats when: •...
Page 71 Locks Illuminated Entry The interior lamps and select exterior lamps illuminate when you use the intelligent access key or the keyless entry keypad to unlock the vehicle. The system will turn off the lights if: • you switch the ignition on •...
Page 72 Locks LIFTGATE WARNING: Do not allow people to travel in any area of your vehicle that does not have seats and safety belts. Riding in a cargo area, inside or outside of the vehicle, is extremely dangerous. In a crash, people riding in these areas are more likely to be seriously injured or killed.
Page 73 Locks • The vehicle speed is at or above 3 mph (5 km/h) If the liftgate reverses and starts to close after an open request, a fast continuous tone indicates excessive load on the gate or a possible strut failure. Have the system checked by an authorized dealer if you still have a fast tone after removing the load.
Page 74 Locks WARNING: Keep clear of the liftgate when activating the rear switch. To open the liftgate window: Press the window release button B located inside the liftgate pull handle. Obstacle Detection When closing: The liftgate reverses to full open when it detects an obstacle.
Page 75 Locks SECURICODE™ KEYLESS ENTRY KEYPAD (IF EQUIPPED) The keypad, located near the driver window, is invisible until touched and then it lights up so you can see and touch the appropriate buttons. Note: If you enter your entry code too fast on the keypad, the unlock function may not work.
Page 76 Locks Erasing a Personal Code 1. Enter the factory-set 5-digit code. 2. Press and release 1•2 on the keypad within five seconds. 3. Press and hold 1•2 for two seconds. This must be done within five seconds of completing Step 2. All personal codes are now erased and only the factory-set 5-digit code will work.
Page 77: Security
Security SECURILOCK® PASSIVE ANTI-THEFT SYSTEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Note: Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting issues if they are too close to the key when starting your vehicle.
Page 78: Anti-Theft Alarm
Security Automatic Disarming Your vehicle disarms when you switch the ignition on with a coded key. Spare Intelligent Access Keys Your intelligent access key functions as a programmed key that operates the driver door lock and activates intelligent access with the push button start system, or the remote start system.
Page 79 Security Disarming the Alarm To disarm the alarm, do any of the following: • Press the power door unlock button within the 20-second pre-armed mode. • Press the unlock button on the remote control. • Unlock the doors with the keyless entry pad. •...
Page 80: Steering Wheel
Steering Wheel ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. Refer to Sitting in the Correct Position in the Seats chapter. Use the control on the side of the steering column to tilt the position.
Page 81 Steering Wheel AUDIO CONTROL Type One A. Seek up or next B. Volume up C. Volume down D. Seek down or previous...
Page 82 Steering Wheel Type Two A. Volume up B. Seek up or next C. Media D. Seek down or previous E. Volume down Media Press the media button repeatedly to scroll through available audio modes. Seek, Next or Previous Press the seek button to: •...
Page 83 Steering Wheel VOICE CONTROL (IF EQUIPPED) Type One A. Phone mode B. Voice recognition Press OK to confirm selection. See the SYNC or Navigation System chapter.
Page 84 Steering Wheel Type Two A. Phone mode B. Voice recognition Press OK to confirm selection. See the SYNC or Navigation System chapter. CRUISE CONTROL See the Cruise Control chapter.
Page 85: Pedals
Pedals ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never use the controls when your feet are on the accelerator or brake pedals, especially when the vehicle is moving. Note: Adjust the pedals only when your vehicle is in park (P). Depending on your vehicle and equipment level, the shape and location of your power-adjustable pedal control can vary.
Page 86: Wipers And Washers
Wipers and Washers WINDSHIELD WIPERS Note: Fully defrost the windshield before turning on the windshield wipers. Note: Make sure the windshield wipers are turned off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears.
Page 87: Windshield Washers
Wipers and Washers Keep the outside of the windshield clean, especially the area around the interior mirror where the sensor is located, or sensor performance may be affected. WINDSHIELD WASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out.
Page 88: Lighting
Lighting LIGHTING CONTROL A. Off B. Parking lamps, instrument panel lamps, license plate lamps and rear lamps C. Headlamps High Beams • Push the lever toward the instrument panel to switch on the high beams. • Pull the lever toward you to switch of the high beams.
Page 89: Autolamps
Lighting AUTOLAMPS WARNING: The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting during low visibility driving conditions. Also, the autolamps switch position may not activate the headlamps in all low visibility conditions, such as daytime fog.
Page 90: Instrument Lighting Dimmer
Lighting INSTRUMENT LIGHTING DIMMER Use to adjust the brightness of the instrument panel and all applicable lit components in the vehicle during headlamp and parking lamp operation. • Tap the top or bottom of the control to brighten/dim all interior lit components incrementally, or •...
Page 91: Adaptive Headlamps
Lighting ADAPTIVE HEADLAMPS The headlamp beams move in the same direction as the steering wheel which provides more visibility when driving around curves. A. Without adaptive headlamps B. With adaptive headlamps The system will only work with the lighting control switch in the autolamp position.
Page 92: Direction Indicators
• Push up to activate the right turn signal. WELCOME LIGHTING The Lincoln welcome mat projection lights are on the bottom of the exterior mirror housings. They project light onto the ground a short distance from you vehicle when welcome lighting or lighted entry turns...
Page 93 Lighting Second Row Map Lamps The second row map lamps are located in the headliner above the second row seats. The second row map lamp lights when: • any door is opened, • the instrument panel dimmer switch is rotated until the courtesy lamps come on, and •...
Page 94: Windows And Mirrors
Windows and Mirrors POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let them play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings.
Page 95: Exterior Mirrors
Windows and Mirrors Window Lock A. Unlock B. Lock Press the control to lock or unlock the rear window controls. Accessory Delay You can use the window switches for several minutes after you switch the ignition off, or until you open either front door. EXTERIOR MIRRORS Power Exterior Mirrors WARNING: Do not adjust the mirror while your vehicle is in...
Page 96 Windows and Mirrors Power-Folding Mirrors Note: Activating the mirrors 10 or more times within one minute, or repeated folding and unfolding of the mirrors while holding the control down during full travel may disable the system to protect motors from overheating.
Page 97 Windows and Mirrors Auto-Dimming Feature The driver’s side exterior mirror will automatically dim when the interior auto-dimming mirror is activated. Signal Indicator Mirrors The rear-facing portion of the appropriate mirror housing will blink when the turn signal is activated. Blind Spot Information System (BLIS®) with Cross Traffic Alert (CTA) (If Equipped) Refer to Blind Spot Information System (BLIS®) with Cross Traffic Alert (CTA) in the Driving Aids chapter.
Page 98 Windows and Mirrors CHILDMINDER MIRROR (IF EQUIPPED) On double bin overhead consoles, the conversation mirror allows the driver to view the rear seating area. WARNING: Do not use the childminder mirror to view rearward traffic, do not allow rear passengers to distract you from the driving task, and make sure the rear view mirror has a clear view of rearward traffic.
Page 99: Sun Visors
Windows and Mirrors SUN VISORS Rotate the visor toward the side window and extend it rearward for extra sunlight coverage. Illuminated Visor Vanity Mirror Lift the cover to switch on the lamp. MOONROOF (IF EQUIPPED) WARNING: Do not let children play with the moonroof or leave children unattended in the vehicle.
Page 100 Windows and Mirrors Opening and Closing the Moonroof Press and release the SLIDE control to open the moonroof. The moonroof will stop short of the fully opened position. Note: This position helps to reduce rumbling wind noise which may happen with the moonroof fully open.
Page 101: Instrument Cluster
Instrument Cluster GAUGES A. Left Information Display B. Speedometer C. Right Information Display. See the MyTouch chapter for more information. Left Information Display Odometer Located in the bottom of the information display. Registers the accumulated distance your vehicle has travelled. Trip Computer See Trip Computer in Information Displays.
Page 102: Warning Lamps And Indicators
Instrument Cluster WARNING LAMPS AND INDICATORS The following warning lamps and indicators will alert you to a vehicle condition that may become serious. Some lamps will illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.
Page 103 Instrument Cluster Cruise Control It will illuminate when you switch this feature on. Direction Indicator Illuminates when the left or right turn signal or the hazard warning flasher is switched on. If the indicators stay on or flash faster, check for a burned out bulb. Door Ajar Displays when the ignition is on and any door is not completely closed.
Page 104 Instrument Cluster Hill descent (if equipped) Illuminates when hill descent is switched on. Liftgate ajar It will illuminate when the ignition is on and liftgate is not completely closed. Low Fuel Level It will illuminate when the fuel level is low or near empty. Refuel as soon as possible.
Page 105 Instrument Cluster Service Engine Soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb and to indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing. Normally, the “service engine soon” light will stay on until the engine is cranked, then turn itself off if no malfunctions are present.
Page 106: Audible Warnings And Indicators
Instrument Cluster Illuminates momentarily when two-wheel drive high is selected. 4X4 High Illuminates when four-wheel drive high is engaged. 4X4 AUTO Displays when using the 4x4 system. AUDIBLE WARNINGS AND INDICATORS Key In Ignition Warning Chime Sounds when the key is left in the ignition in the off or accessory position and the driver’s door is opened.
Page 107: Information Displays
Information Displays GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 108 Information Displays Scroll up/down to highlight one of the categories, then press the right arrow key or OK to enter into that category. Press the left arrow key as needed to exit back to the main menu. Display Mode Use the arrow buttons to choose between the following display options. Display Mode Digital tachometer and fuel level gauge Digital tachometer, fuel level gauge and engine coolant temperature...
Page 109 Information Displays Towing Use the arrow buttons to configure different towing setting choices. Towing No trailer connected Active trailer name or Default Trailer Trailer Status Accumulated trailer miles Trailer brake gain Trailer Sway Control - check enabled or uncheck disabled Trailer Brake Mode Elect.
Page 110 Information Displays Off Road In this mode, you can view different off road information. Off Road Off Road Status (Pitch, Roll, Wheel Angle) Settings In this mode, you can configure different driver setting choices. Note: Some items are optional and may not appear. Settings Blindspot - check enabled or uncheck disabled Cross Traffic Alert - check enabled or uncheck disabled...
Page 111 Information Displays Settings Easy Entry / Exit - check enabled or uncheck disabled Lighting Autolamp Delay Select time interval Locks Autolock - check enabled or uncheck disabled Autounlock - check enabled or uncheck disabled Remote Unlock All Doors or Driver Oil Life Remaining Life XXX% —...
Page 112: Information Messages
Information Displays INFORMATION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may be abbreviated or shortened depending upon which cluster type you have. Press the OK button to acknowledge and remove some messages from the information display.
Page 113 Information Displays Battery and Charging System Action / Description Messages Check Charging System Stop your vehicle as soon as it is safe to do so and switch off the ignition. Contact your authorized dealer. Turn Power Off to Save Battery Displays to warn of a low 12–volt battery condition.
Page 114 Information Displays Blind Spot Information System Action / Description Messages Vehicle Coming From X Displayed when the blind spot information system with cross traffic alert (CTA) system is operating and senses a vehicle. Brake System Messages Action / Description Brake Fluid Level Low Indicates the brake fluid level is low and the brake system should be inspected immediately.
Page 115 Information Displays Engine Messages Action / Description Power Reduced To Lower Engine Displays when the engine has Temp reduced power to help reduce high engine temperature. Engine On Informs you that you are exiting your vehicle and the engine is on. Fuel Messages Action / Description Check Fuel Fill Inlet...
Page 116 Information Displays Keys and Intelligent Access Action / Description Messages Press Brake to Start Displayed when the start/stop button is pressed without the brake pedal being applied. This is a reminder that the brake pedal must be applied when the start/stop button is pressed in order to start the engine.
Page 117 Information Displays Maintenance Messages Action / Description See Manual The powertrain needs service due to a powertrain malfunction. Washer Fluid Level LOW Displays when the washer fluid is low and needs to be refilled. Factory Mode Contact Dealer Your vehicle is still in Factory mode.
Page 118 Information Displays MyKey® Messages Action / Description AdvanceTrac On MyKey Setting With a MyKey in use, AdvanceTrac turns on. Traction Control On MyKey Setting With a MyKey in use, traction control turns on. MyKey Park Aid Cannot be With a MyKey in use, park aid is Deactivated always on.
Page 119 Information Displays Park Aid Messages Action / Description Check Park Aid Displays when the transmission is in R (Reverse) and the park aid is disabled. Rear Park Aid On Off Displays the park aid status. Check Rear Park Aid Displays when the transmission is in reverse (R) and the park aid is disabled.
Page 120 Information Displays Starting System Messages Action / Description To Drive: Turn Key to On Displays when there is a problem with your vehicle’s starting system. See an authorized dealer for service. Suspension System Messages Action / Description Driver Control malfunction Service Displays when there is a problem required with your vehicle’s suspension...
Page 121 Information Displays Trailer Messages Action / Description Trailer Brake Gain: XX.X No Displays the current gain setting Trailer for the trailer brake when a trailer is not connected. Trailer Brake Module Fault Displays and is accompanied by a single chime in response to faults sensed by the TBC.
Page 122 Information Displays Trailer Messages Action / Description Trailer Right Turn Lamps Fault There is a fault with your trailer Check Lamps turn lamp. Check your lamp. Trailer Park Lamps Fault Check There is a fault with your trailer Lamps park lamp. Check your lamp. Trailer Battery Not Charging See There is a fault with your trailer Manual...
Page 123: Climate Control
Climate Control AUTOMATIC CLIMATE CONTROL Note: You can switch temperature units between Fahrenheit and Celsius. See Settings in the MyLincoln Touch chapter. A. – TEMP +: Press to increase or decrease the air temperature for the driver side of the vehicle. B.
Page 124 Climate Control F. MAX A/C: Press the button to maximize cooling. Recirculated air flows through the instrument panel vents, air conditioning automatically turns on, and the fan automatically adjusts to the highest speed. G. A/C: Press the button to switch the air conditioning compressor on or off.
Page 125 Climate Control AUXILIARY CLIMATE CONTROL (IF EQUIPPED) The auxiliary climate controls are on the rear of the center console. Depending on your vehicle and option package, you may not have all these controls on your auxiliary climate controls. A. Fan speed control: Controls the volume of air circulated in the rear of your vehicle.
Page 126 Climate Control GENERAL OPERATING TIPS General Hints Note: Prolonged use of recirculated air may cause the windows to fog Note: You may feel a small amount of air from the footwell air vents regardless of the air distribution setting. Note: To reduce humidity build-up inside your vehicle, do not drive with the system switched off or with recirculated air always switched on.
Page 127: Rear Window Defroster
Climate Control Cooling the Interior Quickly Press the MAX A/C button. Recommended Settings for Cooling 1. Press the AUTO button. 2. Adjust the temperature control to the desired setting. Use 72°F (22°C) as a starting point, then adjust the setting as necessary. Side Window Defogging in Cold Weather 1.
Page 128: Remote Start
Climate Control REMOTE START (IF EQUIPPED) The remote start feature allows you to pre-condition the interior of your vehicle. The climate control system works to achieve comfort according to your previous settings. Note: You cannot adjust the system during remote start operation. Turn the ignition on to return the system to its previous settings.
Page 129: Seats
Seats SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seatback reclined too far can take off weight from the seat cushion and affect the passenger sensing system, resulting in serious injury or death in a crash. Always sit upright against your seatback, with your feet on the floor.
Page 130: Head Restraints
Seats HEAD RESTRAINTS WARNING: Fully adjust the head restraint before you sit in or operate your vehicle. This will help minimize the risk of neck injury in the event of a crash. Do not adjust the head restraint when your vehicle is moving. WARNING: The adjustable head restraint is a safety device.
Page 131 Seats Front Seat Head Restraints The head restraints consist of : A. An energy absorbing head restraint. B. Two steel stems. C. Guide sleeve adjust and release button. D. Guide sleeve unlock and remove button. Adjusting the Head Restraint Raise: Pull up the head restraint. Lower: 1.
Page 132 Seats Second row outboard seat head restraints – The outboard head restraints are non-adjustable, but you can fold them. The non-adjustable head restraints consist of: • A trimmed energy absorbing foam and structure (A). • A fold strap (B). 1. Pull the fold strap to fold the outboard head restraint. 2.
Page 133: Power Seats
Seats POWER SEATS WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. WARNING: Never adjust the driver seat or seatback when the vehicle is moving. This may result in sudden seat movement, causing loss of control of your vehicle.
Page 134: Memory Function
Seats Power Lumbar The control is located on the outboard side of the seat. Press the forward or rearward side of the control for more or less support. MEMORY FUNCTION This feature will save and recall the positions of the driver seat, power mirrors, adjustable pedals, and steering column.
Page 135 Seats Recalling Saved Memory Positions To recall position 1 settings, press and release memory button 1. The memory features will move to the saved memory 1 position. You can also recall the memory positions when you: • Press your remote control transmitter unlock button (if the remote control is programmed to a memory position).
Page 136 Seats Climate Controlled Seats (If Equipped) Heated Seats WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater. The seat heater may cause burns even at low temperatures, especially if used for long periods of time.
Page 137 Seats Climate Controlled Seats Air Filter Replacement (If Equipped) The climate controlled seat system includes air filters. You must replace them periodically. See scheduled maintenance information for more information. There is a filter located under each front seat. You can access the filter from the second row seat.
Page 138: Rear Seats
Seats REAR SEATS Folding Down the Second Row 40% Seat System WARNING: Use caution when folding the seatback to the flat back position as the system will move forward when you lift the release handle. WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback.
Page 139 Seats 2. Locate handle on the side of the seat cushion by the door. 3. Pull up on the handle and push the seat back forward toward the front of the vehicle. To return the seat to the upright position: 1.
Page 140 Seats Placing the Second Row Outboard 40% Seats in Cargo Mode WARNING: Use caution when folding the seatback to the flat back position as the system will move forward when you lift the release handle. WARNING: Always return the seat from the kneel position prior to raising the seatback.
Page 141 Seats Adjusting the Second Row Outboard 40% Seat for E-Z Entry WARNING: Always latch the vehicle seat to the floor, whether the seat is occupied or empty. If not latched, the seat may cause injury during a sudden stop. WARNING: After using the E-Z Entry feature make sure there are not any objects, cargo or the feet of a third row occupant under the second row seat when latching the seat to the floor.
Page 142 Seats To return the seat to a seating position: 1. Push the seat down and latch to the floor. 2. Bring the seatback to an upright position. The seatback should lock into position. Note: If the seatback will not return to the upright position, tumble the seat again and re-latch it to the floor.
Page 143 Seats Reclining the Second-Row Outboard 40% Seatback WARNING: Reclining the seatback can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of a crash. The release handle is located on the outboard side of the seat cushion.
Page 144 Seats 2. With the latch released the seatback can be lowered into the load floor position. 3. To return the seat to the upright position, lift the seatback until the latch is fully engaged. Adjusting the Second-Row Center 20% Seat (If Equipped) Note: Move this seat forward to keep a child in a child restraint close to the front seat occupants.
Page 145 Seats Rear Heated Seats (If Equipped) WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater. The seat heater may cause burns even at low temperatures, especially if used for long periods of time.
Page 146 Seats Folding Down the Third Row Seats to the Load Floor WARNING: To prevent possible damage to the seat or safety belts, make sure that the safety belts are not buckled when moving the seat to the load floor position. WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback.
Page 147 Seats PowerFold™ Third-Row Seat (If Equipped) Note: The power fold down seats will operate for 10 minutes after the ignition switch is in off. The transmission must be in park (P) and the liftgate, or liftgate glass must be open. Similar to the battery saver feature, the power third row seat will be disabled 10 minutes after turning the vehicle off.
Page 148: Universal Garage Door Opener (If Equipped)
Universal Garage Door Opener (If Equipped) 147 HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the safety stop and reverse feature as required by U.S.
Page 149 148 Universal Garage Door Opener (If Equipped) Programming Note: Put a new battery in the hand-held transmitter. This will ensure quicker training and accurate transmission of the radio-frequency signal. 1. With your vehicle parked outside of the garage and your key in the ignition, turn the key so that the ignition is in the on position.
Page 150 Universal Garage Door Opener (If Equipped) 149 After programming the HomeLink button, follow Steps 5 – 7 as listed below to program your garage door opener. Note: You may need a ladder to reach the unit and you may need to remove the cover or lamp lens on your garage door opener.
Page 151 150 Universal Garage Door Opener (If Equipped) Programming HomeLink to a Genie Intellicode 2 garage door opener Note: The Genie Intellicode 2 transmitter must already be programmed to operate with the garage door opener. Programing the transmitters To program HomeLink to the transmitter you must first put the transmitter into programming mode.
Page 152 Universal Garage Door Opener (If Equipped) 151 Programming HomeLink to the Genie Intellicode garage door opener motor Note: You may need a ladder to access the garage door opener motor. To program HomeLink to the garage door opener motor: 1. Press and hold the PROGRAM button on the garage door opener motor until both blue LED’s turn on.
Page 153: Auxiliary Power Points
Auxiliary Power Points AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fire or serious injury. Note: If used when the engine is not running, the battery will discharge.
Page 154 Auxiliary Power Points 110 Volt AC Power Point (If Equipped) WARNING: Do not keep electrical devices plugged in the power point whenever the device is not in use. Do not use any extension cord with the 110 volt AC power point, since it will defeat the safety protection design.
Page 155 Auxiliary Power Points The power point can provide power whenever the ignition is on and the indicator light is on. The indicator light is located in the top left corner of the power point. When the indicator light is: • on — power point is ready to supply power •...
Page 156: Storage Compartments
Storage Compartments CENTER CONSOLE Stow items in the cupholder carefully as items may become loose during hard braking, acceleration or collisions, including hot drinks which may spill. Available console features include: A. Cupholders B. Utility compartment, coin holder slots, tissue box holder, audio input jack and USB port C.
Page 157: Starting And Stopping The Engine
Starting and Stopping the Engine GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover.
Page 158 Starting and Stopping the Engine Ignition Modes Off: Turns the ignition off. • Without applying the brake pedal, press and release the button once when the ignition is in the on mode, or when the engine is running but the vehicle is not in motion. Accessory: Allows some electrical accessories to operate while the engine is not running.
Page 159 Starting and Stopping the Engine Before starting the engine check the following: • Make sure all occupants have fastened their safety belts. • Make sure the headlamps and electrical accessories are off. • Make sure the parking brake is on. •...
Page 160 Starting and Stopping the Engine Failure to Start If you cannot start the engine after three attempts, wait 10 seconds and follow this procedure: 1. Fully press the brake pedal. 2. Fully press the accelerator pedal and hold it there. 3.
Page 161: Engine Block Heater
Starting and Stopping the Engine Guarding Against Exhaust Fumes WARNING: If you smell exhaust fumes inside your vehicle, have this checked immediately. Do not drive your vehicle if you smell exhaust fumes. Carbon monoxide is present in exhaust fumes. Take precautions to avoid its dangerous effects.
Page 162 Starting and Stopping the Engine • Make sure that when in operation, the extension cord plug and the heater cord plug connections are free and clear of water. This could cause an electric shock or fire. • Make sure your vehicle is parked in a clean area, clear of combustibles.
Page 163: Fuel And Refueling
Fuel and Refueling SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops.
Page 164: Fuel Quality
Fuel and Refueling • Avoid inhaling fuel vapors. Inhaling too much fuel vapor of any kind can lead to eye and respiratory tract irritation. In severe cases, excessive or prolonged breathing of fuel vapor can cause serious illness and permanent injury. •...
Page 165 Fuel and Refueling • Fuels containing the octane booster additive, methylcyclopentadienyl manganese tricarbonyl (MMT). • Leaded-fuel (The use of leaded fuel is prohibited by law). Note: Use of any fuel other than recommended fuel can cause powertrain damage, impair the emission control system or cause loss of vehicle performance.
Page 166 Fuel and Refueling Refilling With a Portable Fuel Container WARNING: Do not insert the nozzle of portable fuel containers or aftermarket funnels into the Easy Fuel® system. This could damage the fuel system and its seal, and may cause fuel to run onto the ground instead of filling the tank, which could result in serious personal injury.
Page 167: Refueling
Fuel and Refueling REFUELING WARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. To help avoid injuries to you and others: • Read and follow all the instructions on the pump island. • Turn off your engine when you are refueling. •...
Page 168 Fuel and Refueling Easy Fuel® “No Cap” Fuel System WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door, do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury.
Page 169: Fuel Consumption
Fuel and Refueling FUEL CONSUMPTION Filling the Tank The advertised capacity is the indicated capacity and the empty reserve combined. Indicated capacity is the difference in the amount of fuel in a full tank and a tank when the fuel gauge indicates empty. Empty reserve is the amount of fuel in the tank after the fuel gauge indicates empty.
Page 170 Fuel and Refueling EMISSION CONTROL SYSTEM WARNING: Do not park, idle, or drive your vehicle in dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, which can start a fire. WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment.
Page 171 Fuel and Refueling permitted to intentionally remove an emission control device or prevent it from working. Information about your vehicle’s emission system is on the Vehicle Emission Control Information Decal located on or near the engine. This decal also lists engine displacement. Please consult your warranty information for complete emission warranty information.
Page 172 Fuel and Refueling Readiness for Inspection/Maintenance (I/M) Testing Some state, provincial and local governments may have Inspection/Maintenance (I/M) programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. If the service engine soon indicator is on or the bulb does not work, the vehicle may need to be serviced.
Page 173: Transmission
Transmission AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. WARNING: Do not use the tow/haul feature when driving in icy or slippery conditions as the increased engine braking can cause the rear wheels to slide and the vehicle to swing around with the possible loss of vehicle control.
Page 174 Transmission To put your vehicle in P (Park): • Come to a complete stop • Move the gearshift lever and securely latch it in P (Park) R (Reverse) With the gearshift lever in R (Reverse), the vehicle will move backward. Always come to a complete stop before shifting into and out of R (Reverse).
Page 175 Transmission the vehicle speed when descending a hill, without the accelerator pedal being pressed. The amount of downshift braking provided will vary based upon the amount the brake pedal is pressed. To deactivate the tow/haul feature and return to normal driving mode, press the button on the end of the gearshift lever.
Page 176 Transmission Press the (+)/(–) buttons on the gearshift lever to manually make shifts: • Press (+) on the gearshift lever button to manually upshift the transmission. • Press (–) on the gearshift lever button to manually downshift the transmission. When manual control is no longer desired, return the transmission to the D (Drive) position.
Page 177 Transmission PRS (Progressive Range Selection) With the gearshift lever in D (Drive), press the – button to active PRS. The available and selected gears will be indicated on the instrument cluster. All available gears will be displayed with the current gear indicated. Press the –...
Page 178 Transmission If you cannot move the gearshift lever out of P (Park) with ignition in the on position and the brake pedal pressed, it is possible that a fuse has blown or the vehicle’s brake lamps are not operating properly. Refer to the Fuses chapter for more information.
Page 179: Message Center
Four-Wheel Drive (If Equipped) USING FOUR-WHEEL DRIVE (4WD) (if equipped) WARNING: For important information regarding safe operation of this type of vehicle, see General Information in the Wheels and Tires chapter. Note: Do not use 4X4 mode on dry, hard surfaced roads. Doing so will produce excessive noise, increase tire wear and may damage drive components.
Page 180 Four-Wheel Drive (If Equipped) 4WD switch positions WARNING: Utility and four-wheel drive vehicles are not designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed to perform satisfactorily under off-road conditions. Avoid sharp turns or abrupt maneuvers in these vehicles.
Page 181 Four-Wheel Drive (If Equipped) How Your Vehicle Differs From Other Vehicles WARNING: Vehicles with a higher center of gravity such as utility and four-wheel drive vehicles handle differently than vehicles with a lower center of gravity. Utility and four-wheel drive vehicles are not designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed to perform satisfactorily under off-road conditions.
Page 182 Four-Wheel Drive (If Equipped) 4WD vehicles are specially equipped for driving on sand, snow, mud and rough terrain and have operating characteristics that are somewhat different from conventional vehicles, both on and off the road. Power is supplied to all four wheels through a transfer case. On 4WD vehicles, the transfer case allows you to select between different 4WD modes when necessary.
Page 183 Four-Wheel Drive (If Equipped) If your vehicle gets stuck WARNING: Do not spin the wheels at over 35 mph (56 km/h). The tires may fail and injure a passenger or bystander. Note: Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transmission may occur.
Page 184 Four-Wheel Drive (If Equipped) Mud and water Note: Driving through deep water may damage the vehicle. If you must drive through high water, drive slowly. Traction or brake capability may be limited. When driving through water, determine the depth; avoid water higher than the bottom of the hubs (if possible) and proceed slowly.
Page 185 Four-Wheel Drive (If Equipped) seeing what conditions are on the other side. Do not drive in reverse over a hill without the aid of an observer. When climbing a steep slope or hill, start in a lower gear rather than downshifting to a lower gear from a higher gear once the ascent has started.
Page 186 Four-Wheel Drive (If Equipped) Avoid sudden applications of power and quick changes of direction on snow and ice. Apply the accelerator slowly and steadily when starting from a full stop. Avoid sudden braking as well. Although a 4WD vehicle may accelerate better than a two-wheel drive vehicle in snow and ice, it won’t stop any faster, because as in other vehicles, braking occurs at all four wheels.
Page 187: Brakes
Brakes GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn out. Have them inspected by an authorized dealer. If your vehicle has continuous vibration or shudder in the steering wheel while braking, have your vehicle inspected by an authorized dealer.
Page 188: Hints On Driving With Anti-Lock Brakes
Brakes HINTS ON DRIVING WITH ANTI-LOCK BRAKES When the system is operating, the brake pedal will pulse and may travel further. Maintain pressure on the brake pedal. You may also hear a noise from the system. This is normal. The anti-lock braking system will not eliminate the risks when: •...
Page 189 Brakes Hill start assist keeps your vehicle stationary long enough to move your foot from the brake pedal to the accelerator pedal when your vehicle is on a slope. The brakes are released automatically once the engine has developed sufficient drive to prevent the vehicle from rolling down the slope. This is an advantage when pulling away on a slope, (for example from a car park ramp, traffic lights or when reversing uphill into a parking space).
Page 190: Traction Control
Traction Control PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
Page 191: Stability Control
Stability Control PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction or wheel and tire size may change the handling characteristics of the vehicle and may adversely affect the performance of the AdvanceTrac® system. In addition, installing any stereo loudspeakers may interfere with and adversely affect the AdvanceTrac®...
Page 192 Stability Control A Vehicle without AdvanceTrac with RSC skidding off its intended route. B Vehicle with AdvanceTrac with RSC maintaining control on a slippery surface. USING STABILITY CONTROL AdvanceTrac®With RSC™ The system automatically activates when you start your engine. You can turn off the electronic stability control and roll stability control portions of the system below 35 mph (56 km/h).
Page 193 Stability Control AdvanceTrac with RSC Features Stability Roll Electronic Traction Button control stability stability control functions OFF light control control system Button pressed and held for more than Flashes then 5 seconds at illuminated Disabled Disabled Disabled vehicle speed solid under 35 mph (56 km/h) Vehicle speed...
Page 194: Terrain Response
Terrain Response HILL DESCENT CONTROL™ (IF EQUIPPED) WARNING: Hill descent control cannot control descent in all surface conditions and circumstances, such as ice or extremely steep grades. Hill descent control is a driver assist system and cannot substitute for good judgment by the driver. Failure to do so may result in loss of vehicle control, crash or serious injury.
Page 195 Terrain Response Note: Noise from the ABS pump motor may be observed during hill descent control operation. This is a normal characteristic of the ABS and should be no reason for concern. Hill descent modes • At speeds below 20 mph (32 km/h): When the HDC button is pressed and HDC is active, HILL DESCENT CONTROL ACTIVE will appear in the message center for several seconds.
Page 196: Parking Aids
Parking Aids SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving in reverse on a flat surface at parking speeds. Traffic control systems, inclement weather, air brakes, and external motors and fans may also affect the function of the sensing system;...
Page 197 Parking Aids The sensing system warns the driver of obstacles within a certain range of the bumper area. The system turns on automatically whenever the ignition is switched on. When receiving a detection warning, the radio volume is reduced to a predetermined level.
Page 198 Parking Aids Front Sensing System The front sensors are active when the gearshift is in any position other than P (Park) or N (Neutral) and the vehicle speed is below 8 mph (13 km/h). A. Coverage area of up to 27 inches (70 centimeters) from the front of the vehicle and about 6–9 inches (15–23 centimeters) to the side of...
Page 199: Rear-View Camera System
Parking Aids REAR VIEW CAMERA SYSTEM (IF EQUIPPED) WARNING: The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage. WARNING: Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system.
Page 200 Parking Aids Using the Rear View Camera System The rear view camera system displays what is behind your vehicle when you place the transmission in R (Reverse). The system uses two types of guides to help you see what is behind your vehicle: 1.
Page 201 Parking Aids Guidelines and the Centerline Note: Fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if fixed guidelines are on. A. Rear bumper B. Fixed guideline: Red zone C. Fixed guideline: Yellow zone D.
Page 202 Parking Aids Manual Zoom WARNING: When manual zoom is on, the full area behind the vehicle is not shown. Be aware of your surroundings when using the manual zoom feature. Note: Manual zoom is only available when the transmission is in R (Reverse).
Page 203: Cruise Control
Cruise Control PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
Page 204 Cruise Control Type Two Switching On Cruise Control The cruise controls are located on the steering wheel. Press and release ON. Setting a Speed 1. Accelerate to the desired speed. 2. Press and release SET+. 3. Take your foot off the accelerator pedal.
Page 205: Driving Aids
Driving Aids BLIND SPOT INFORMATION SYSTEM (BLIS®) WITH CROSS TRAFFIC ALERT (CTA) (IF EQUIPPED) WARNING: To help avoid injuries, NEVER use the BLIS® as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes. BLIS® is not a replacement for careful driving.
Page 206 Driving Aids Using the Systems BLIS® turns on when the engine is started and the vehicle is driven forward above 3 mph (5 km/h); it remains on while the transmission is in D (Drive) or N (Neutral). If shifted out of D (Drive) or N (Neutral), the system enters CTA mode.
Page 207 Driving Aids Zone coverage also decreases when parking at shallow angles. Here, the left sensor is mostly obstructed; zone coverage on that side is severely limited. System Lights and Messages The BLIS® and CTA systems illuminate a yellow alert indicator in the outside mirror on the side of the vehicle the approaching vehicle is coming from.
Page 208 Driving Aids System Sensors WARNING: Just prior to the system recognizing a blocked condition and alerting the driver, the number of missed objects will increase. To help avoid injuries, NEVER use the BLIS® as a replacement for using the side and rear view mirrors and looking over your shoulder before changing lanes.
Page 209 Driving Aids Reasons for messages being displayed Heavy rainfall/snowfall No action required. The system automatically interferes with the resets to an unblocked state once the radar signals rainfall/snowfall rate decreases or stops. Do not use BLIS® and/or CTA in these conditions. System Limitations The BLIS®...
Page 210: Steering
Driving Aids Switching the Systems Off and On One or both systems can be switched off temporarily by using the information display control; refer to the Information Display chapter. When you switch off the Blind Spot Information System, you will not receive alerts and the information display will display a system off message.
Page 211: Auto Leveling Suspension
Driving Aids for you to steer. This occurs to prevent internal overheating and permanent damage to your steering system. If this should occur, you will neither lose the ability to steer the vehicle manually nor will it cause permanent damage. Typical steering and driving maneuvers will allow the system to cool and steering assist will return to normal.
Page 212: Load Carrying
Load Carrying ROOF RACKS AND LOAD CARRIERS WARNING: When loading the roof rail crossbars, it is recommended to evenly distribute the load, as well as maintain a low center of gravity. Loaded vehicles, with higher centers of gravity, may handle differently than unloaded vehicles. Extra precautions, such as slower speeds and increased stopping distance, should be taken when driving a heavily loaded vehicle.
Page 213: Vehicle Loading
Load Carrying LOAD LIMIT Vehicle Loading – With and Without a Trailer This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading your vehicle will provide maximum return of vehicle design performance.
Page 214 Load Carrying WARNING: The appropriate loading capacity of your vehicle can be limited either by volume capacity (how much space is available) or by payload capacity (how much weight the vehicle should carry). Once you have reached the maximum payload of your vehicle, do not add more cargo, even if there is space available.
Page 215 Load Carrying Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) –...
Page 216 Load Carrying • Example only: WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury.
Page 217 Load Carrying GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo and passengers –...
Page 218 Load Carrying WARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury. Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lb.” on your vehicle’s placard. 2.
Page 219: Cargo Management System
Load Carrying calculation would be: 1400 - (2 x 220) - (12 x 100) = 1400 - 440 - 1200 = - 240 lb. No, you do not have enough cargo capacity to carry that much weight. In metric units, the calculation would be: 635 kg - (2 x 99 kg) - (12 x 45 kg) = 635 - 198 - 540 = -103 kg.
Page 220 Load Carrying Cargo Shelf and Divider (If Equipped) WARNING: Do not load any objects on the shelf that may obstruct your vision or strike occupants of the vehicle in the case of a sudden stop or collision. WARNING: Do not place people or pets on or under the parcel shelf.
Page 221 Load Carrying POWER DEPLOYABLE RUNNING BOARDS (IF EQUIPPED) WARNING: In extreme climates, excessive ice buildup may occur, causing the running boards not to deploy. Be sure that the running boards have deployed, and have finished moving before attempting to step on them. The running boards will resume normal function once the blockage is cleared.
Page 222 Load Carrying Manual Power Deploy To manually operate the running boards, refer to the Information Displays chapter. • This feature can manually set the running boards in the deployed (OUT) position for access to the roof. • When running boards are manually set in the deployed position, they will return to the stowed position and enter automatic mode when the vehicle speed exceeds 5 mph (8 km/h).
Page 223: Towing
Towing TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury.
Page 224 Towing TRAILER SWAY CONTROL WARNING: Turning off trailer sway control increases the risk of loss of vehicle control, serious injury or death. Ford does not recommend disabling this feature except in situations where speed reduction may be detrimental (such as hill climbing), the driver has significant trailer towing experience, and can control trailer sway and maintain safe operation.
Page 225 Towing Note: Certain states require electric trailer brakes for trailers over a specified weight. Be sure to check state regulations for this specified weight. The maximum trailer weights listed may be limited to this specified weight, as your vehicle’s electrical system may not include the wiring connector needed to use electric trailer brakes.
Page 226 Towing ESSENTIAL TOWING CHECKS Follow these guidelines for safe towing: • Do not tow a trailer until you drive your vehicle at least 1000 miles (1600 kilometers). • Consult your local motor vehicle laws for towing a trailer. • See the instructions included with towing accessories for the proper installation and adjustment specifications.
Page 227 Towing Trailer Hitch Cover Your vehicle is equipped with a removable trailer hitch trim cover. To remove the trim cover: 1. Loosen the two quarter-turn fasteners in the bottom of the cover by turning them counterclockwise. Pull the cover downward to remove it.
Page 228 Towing The standard integrated hitch has two ratings depending on mode of operation: • Weight-carrying mode requires a draw bar and hitch ball. The draw bar supports all the vertical tongue load of the trailer. • Weight-distributing mode requires an aftermarket weight-distributing system, which includes draw bar, hitch ball, spring bars and snap-up brackets.
Page 229 Towing Once the trailer is level or slightly nose down toward the vehicle: • Lock the bar tension adjuster in place. • Check that the trailer tongue securely attaches and locks onto the hitch. • Install safety chains, lighting, and trailer brake controls as required by law or the trailer manufacturer.
Page 230 Towing 11. Install and adjust the tension in the weight distributing bars so that the height of the front fender is approximately halfway between H1 and H2. 12. Check that the trailer is level or slightly nose down toward the vehicle.
Page 231 Towing Trailer Lamps WARNING: Never connect any trailer lamp wiring to the vehicle’s tail lamp wiring; this may damage the electrical system resulting in a fire. Contact an authorized dealer as soon as possible for assistance in proper trailer tow wiring installation. Additional electrical equipment may be required.
Page 232 Towing • If you are towing a trailer frequently in hot weather, hilly conditions, at the gross combined weight rating (or any combination of these factors), consider refilling your rear axle with synthetic gear lubricant (if the axle is not already filled with it). See the Capacities and Specifications chapter for the lubricant specification.
Page 233 Towing TRANSPORTING THE VEHICLE If you need to have your vehicle towed, contact a professional towing service or, if you are a member of a roadside assistance program, your roadside assistance service provider. We recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle.
Page 234: Recreational Towing
Towing TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing If your vehicle becomes inoperable (without access to wheel dollies, car-hauling trailer, or flatbed transport vehicle), it can be flat-towed (all wheels on the ground, regardless of the powertrain and transmission configuration) under the following conditions: •...
Page 235: Driving Hints
Driving Hints BREAKING-IN You need to break in new tires for approximately 300 miles (480 kilometers). During this time, your vehicle may exhibit some unique driving characteristics. Avoid driving too fast during the first 1000 miles (1600 kilometers). Vary your speed frequently and change up through the gears early.
Page 236: Floor Mats
Driving Hints • Add particular accessories to your vehicle (e.g.; bug deflectors, rollbars or light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH WATER WARNING: Do not drive through flowing or deep water as you may lose control of your vehicle.
Page 237 Driving Hints WARNING: Always make sure that the floor mats are properly attached to the retention posts in the carpet that are supplied with your vehicle. Floor mats must be properly secured to both retention posts to make sure mats do not shift out of position. WARNING: Never place floor mats or any other covering in the vehicle foot well that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the...
Page 238: Roadside Emergencies
• Towing – Lincoln eligible vehicles to the client’s selling or preferred dealer within 100 miles (161 kilometers) of the disablement location or to the nearest Lincoln dealer. If a client requests a tow to a selling or preferred dealer that is more than 100 miles (161 kilometers) from the disablement location, the client shall be responsible for any mileage costs in excess of 100 miles (161 kilometers).
Page 239 Ford Motor Company will reimburse a reasonable amount for towing to the nearest Lincoln dealership within 100 miles (161 kilometers). To obtain reimbursement information, United States Lincoln vehicle clients, call 1-800-521-4140. Clients will be asked to submit their original receipts. Vehicles Sold in Canada: Getting Roadside Assistance Canadian clients who require roadside assistance, call 1-800-387-9333.
Page 240: Hazard Warning Flashers
Roadside Emergencies HAZARD WARNING FLASHERS The hazard flasher control is located on the instrument panel by the radio. Use it when your vehicle is disabled and is creating a safety hazard for other motorists. • Press the flasher control and all front and rear direction signals will flash.
Page 241: Jump-Starting The Vehicle
Roadside Emergencies Note: When you try to restart your vehicle after a fuel shutoff, the vehicle makes sure that various systems are safe to restart. Once your vehicle determines that the systems are safe, then the vehicle will allow you to restart. Note: In the event that your vehicle does not restart after your third attempt, contact an authorized dealer.
Page 242 Roadside Emergencies Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake manifold or electrical components as grounding points.
Page 243 Roadside Emergencies Jump Starting 1. Start the engine of the booster vehicle and run the engine at a moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables.
Page 244: Customer Assistance
Customer Assistance GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorized dealer. While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction. Please note that certain warranty repairs require special training, equipment or both, so not all authorized dealers are authorized to perform all warranty repairs.
Page 245 Customer Assistance In Canada: Mailing address Lincoln Customer Relationship Centre Ford Motor Company of Canada, Limited P.O. Box 2000 Oakville, Ontario L6K 1C8 Telephone 1-800-387-9333 Online www.lincolncanada.com Twitter English @LincolnMotorCA Twitter French @LincolnQC Instagram @LincolnMotorCA Facebook /LincolnMotorCA Additional assistance If you have questions or concerns, or are unsatisfied with the service you are receiving, follow these steps: 1.
Page 246 Customer Assistance In the United States, a warranty dispute must be submitted to the BBB AUTO LINE before taking action under the Magnuson-Moss Warranty Act, or to the extent allowed by state law, before pursuing replacement or repurchase remedies provided by certain state laws. This dispute handling procedure is not required prior to enforcing state created rights or other rights which are independent of the Magnuson-Moss Warranty Act or state replacement or repurchase laws.
Page 247 Customer Assistance to seek redress by pursuing rights and remedies not created by California Civil Code Section 1793.22(b) or the Magnuson-Moss Warranty Act, resorting to BBB AUTO LINE is not required by those statutes. THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S.
Page 248 Customer Assistance BBB AUTO LINE applications can also be requested by calling the Ford Motor Company Customer Relationship Center at 1-800-392-3673. Note: Ford Motor Company reserves the right to change eligibility limitations, modify procedures, or to discontinue this process at any time without notice and without obligation.
Page 249 Customer Assistance The use of leaded fuel in your vehicle without proper conversion may damage the effectiveness of your emission control system and may cause engine knocking or serious engine damage. Ford Motor Company or Ford of Canada is not responsible for any damage caused by use of improper fuel.
Page 250 Customer Assistance If your vehicle must be serviced while you are traveling or living in the Middle East, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact: FORD MOTOR COMPANY Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3 Allen Park, Michigan 48101 Telephone: +971 4 3326084...
Page 251: Reporting Safety Defects (U.s. Only)
Customer Assistance Obtaining a French Owner’s Manual A French owner’s manual can be obtained from your authorized dealer or by contacting Helm, Incorporated using the contact information listed previously in this section. REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the...
Page 252: Fuses
Fuses CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in your vehicle are not working, a fuse may have blown.
Page 253 Fuses The high-current fuses are coded as follows: Fuse or relay Fuse amp Protected circuits location rating — Rear washer relay — Starter relay — Blower motor relay — Rear wiper relay — Fuel pump relay — Electronic cooling fan —...
Page 254 Fuses Fuse or relay Fuse amp Protected circuits location rating 20A** LH HID headlamp 30A** Trailer brake 20A** Power point (console) 20A** 4x4 module relay 30A** Trailer tow module 30A** Passenger power seat — Air conditioner clutch relay — Trailer tow park lamp relay —...
Page 255 Fuses Fuse or relay Fuse amp Protected circuits location rating 30A** Rear wiper motor 40A** Trailer tow module — Not used 30A** Front wiper motor relay 40A** Rear window defroster and heated mirror relay 10A* Anti-lock brake system run/start feed Powertrain control module ISP Power steering 15A*...
Page 256 Fuses Fuse or relay Fuse amp Protected circuits location rating 20A** Auxiliary power point (right rear quarter panel) 30A** Rear seat climate module 30A** Driver power seat 25A* Vehicle power 1 – powertrain control module 20A* Vehicle power 2 – powertrain control module 20A* Vehicle power 4 –...
Page 257 Fuses Passenger Compartment Fuse Panel The fuse panel is located under the right-hand side of the instrument panel. To remove the trim panel for access to the fuse box, pull the panel toward you and swing it out away from the side and remove it. To reinstall it, line up the tabs with the grooves on the panel, then push it shut.
Page 258 Fuses The fuses are coded as follows: Fuse or relay Fuse amp Protected circuits location rating Driver window Rear seat control, multimedia gateway module Passenger window Demand lamps Amplifier Rear electronic automatic temperature control 7.5A Power mirror, driver seat memory switch —...
Page 259 Fuses Fuse or relay Fuse amp Protected circuits location rating Lock/unlock relays — Not used Horn SWCM, cluster Adjustable pedals/power adjustable column, Datalink Liftgate release decklid, liftglass release motor Push to start switch Passive entry/start module Ignition switch, key inhibit switch Radio, GPS Front park lamps Trailer brake on/off...
Page 260 Fuses Fuse or relay Fuse amp Protected circuits location rating — Not used Not used (spare) Climate control — Not used — Not used — Not used...
Page 261: General Information
Maintenance GENERAL INFORMATION WARNING: Turn off the power running boards, if equipped, before working under the vehicle, jacking or placing any object under the vehicle. Never place your hand between the extended running board and the vehicle. A moving running board may cause injury.
Page 262: Opening And Closing The Hood
Maintenance Working with the Engine Off 1. Set the parking brake and shift to P (Park). 2. Turn off the engine and remove the key (if equipped). 3. Block the wheels. Working with the Engine On WARNING: To reduce the risk of vehicle damage or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running.
Page 263: Under Hood Overview
Maintenance UNDER HOOD OVERVIEW 3.5L V6 EcoBoost® engine A. Windshield washer fluid reservoir B. Battery C. Engine oil filler cap D. Engine oil dipstick E. Brake fluid reservoir F. Engine coolant reservoir G. Air filter assembly H. Power distribution box...
Page 264: Engine Oil Dipstick
Maintenance ENGINE OIL DIPSTICK A. – MIN B. – MAX ENGINE OIL CHECK Refer to the scheduled maintenance information for the appropriate intervals for checking the engine oil. 1. Make sure the vehicle is on level ground. 2. Turn the engine off and wait 15 minutes for the oil to drain into the oil pan.
Page 265: Engine Coolant Check
Maintenance Adding Engine Oil Note: Do not remove the engine oil level dipstick or the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by the American Petroleum Institute (API).
Page 266 Maintenance Note: For best results, coolant concentration should be tested with a refractometer such as Robinair Coolant and Battery Refractometer 75240. We do not recommend the use of hydrometers or coolant test strips for measuring coolant concentrations. Note: Automotive fluids are not interchangeable; do not use engine coolant/antifreeze or windshield washer fluid outside of its specified function and vehicle location.
Page 267 Maintenance • In case of emergency, a large amount of water without engine coolant may be added in order to reach a vehicle service location. In this instance, the cooling system must be drained, chemically cleaned with Motorcraft Premium Cooling System Flush, and refilled with engine coolant as soon as possible.
Page 268 Maintenance If you drive in extremely hot climates: • It may be necessary to have a Ford authorized dealer decrease the coolant concentration to 40%. • A coolant concentration of 40% will provide improved overheat protection. Engine coolant concentrations below 40% will decrease the corrosion/freeze protection characteristics of the engine coolant and may cause engine damage.
Page 269: Automatic Transmission Fluid Check
Maintenance When Fail-Safe Mode is Activated WARNING: Fail-safe mode is for use during emergencies only. Operate the vehicle in fail-safe mode only as long as necessary to bring the vehicle to rest in a safe location and seek immediate repairs. When in fail-safe mode, the vehicle will have limited power, will not be able to maintain high-speed operation, and may completely shut down without warning, potentially losing engine power, power steering assist,...
Page 270: Brake Fluid Check
Maintenance Do not use supplemental transmission fluid additives, treatments or cleaning agents. The use of these materials may affect transmission operation and result in damage to internal transmission components. BRAKE FLUID CHECK Fluid levels between the MIN and MAX lines are within the normal operating range;...
Page 271: Battery
Maintenance CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near the battery, always shield your face and protect your eyes. Always provide proper ventilation.
Page 272: Checking The Wiper Blades
Maintenance If you see any corrosion on the battery or terminals, remove the cables from the terminals and clean with a wire brush. You can neutralize the acid with a solution of baking soda and water. It is recommended that the negative battery cable terminal be disconnected from the battery if you plan to store your vehicle for an extended period of time.
Page 273: Changing The Wiper Blades
Maintenance CHANGING THE WIPER BLADES Replace wiper blades at least once per year for optimum performance. To replace the wiper blades: 1. Fold back the wiper arm and position the wiper blade at a right angle to the wiper arm. 2.
Page 274 Maintenance 4. To attach the new wiper to the wiper arm, align the cross pin and keyway (denoted with the arrows) and firmly press the wiper blade into the wiper arm until an audible snap is heard. If you find this procedure too difficult, please see your dealer. AIR FILTER CHECK WARNING: To reduce the risk of vehicle damage and or personal burn injuries, do not start your engine with the air...
Page 275 Maintenance Changing the Air Filter Element 1. Locate the mass air flow sensor electrical connector on the air outlet tube. This connector will need to be unplugged. 2. Unlock the locking clip on the connector (connector shown from below for clarity), then squeeze and pull the connector off of the air outlet tube.
Page 276 Maintenance 5. Release the three clamps that secure the cover to the air filter housing. Push the air filter cover toward the center of the vehicle and up slightly to release it. 6. Remove the air filter element from the air filter housing. 7.
Page 277: Adjusting The Headlamps
Maintenance ADJUSTING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, an authorized dealer should check the alignment of your headlamps. Vertical Aim Adjustment Before aim adjustment, disable the air suspension system. Refer to Message center in the Driver Controls chapter.
Page 278: Changing A Bulb
Maintenance 5. Locate the vertical adjuster on each headlamp, then use a Phillips #2 screwdriver to turn the adjuster either counterclockwise or clockwise in order to adjust the vertical aim of the headlamp. The upper edge of the light pattern should touch the horizontal reference line.
Page 279 Maintenance Replacing HID Headlamp Bulbs The low/high beam headlamps on your vehicle use a “high intensity discharge” source. These lamps operate at a high voltage. For bulb replacement, see your authorized dealer. Replacing Front Parking Lamp, Turn Signal, and Side Marker Bulbs These lamps are designed with LED light sources.
Page 280 Maintenance Replacing the High-Mount Brake Lamp Bulbs To change the high-mount brake lamp bulbs: 1. Remove the two screws holding the lamp assembly in place. 2. Pull the lamp assembly straight out. 3. Disconnect the wire harness. 4. Press the four tabs that hold the light assembly on, one at a time, and pull the black bulb carrier away from the lamp.
Page 281 Maintenance BULB SPECIFICATION CHART Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time.
Page 282: Cleaning Products
Vehicle Care GENERAL INFORMATION Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. CLEANING PRODUCTS For best results, use the following products or products of equivalent quality: Motorcraft Bug and Tar Remover (ZC-42)
Page 283: Vehicle Care
Vehicle Care • Immediately remove items such as gasoline, diesel fuel, bird droppings and insect deposits because they can cause damage to the vehicle’s paintwork and trim over time. Use Motorcraft Bug and Tar Remover. • Note: Suntan lotions and insect repellents can damage any painted surface;...
Page 284: Waxing
Vehicle Care WAXING Regular waxing is necessary to protect the paint on your car from the elements. We recommend that you wash and wax the painted surface once or twice a year. When washing and waxing, park your vehicle in a shaded area out of direct sunlight.
Page 285: Cleaning The Windows And Wiper Blades
Vehicle Care • Spray Motorcraft Engine Shampoo and Degreaser on all parts that require cleaning and pressure rinse clean. In Canada, use Motorcraft Engine Shampoo. • Never wash or rinse the engine while it is hot or running; water in the running engine may cause internal damage.
Page 286: Cleaning The Interior
Vehicle Care CLEANING THE INTERIOR WARNING: Do not use cleaning solvents, bleach or dye on the vehicle’s safety belts, as these actions may weaken the belt webbing. WARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products could contaminate the side airbag system and affect performance of the side airbag in a collision.
Page 287 Note: Do not use commercially available leather and vinyl cleaning products on Alcantara microfiber cloth fabric. Note: Lincoln Black Label vehicles may have Alcantara microfiber fabric on the seats, headliner, floor mats and door panels. Depending on the type of stain, use water, lemon juice or pure ethyl alcohol when cleaning.
Page 288: Cleaning The Instrument Panel And Instrument Cluster Lens
Vehicle Care CLEANING THE INSTRUMENT PANEL AND INSTRUMENT CLUSTER LENS WARNING: Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system. Note: Follow the same procedure as cleaning leather seats for cleaning leather instrument panels and leather interior trim surfaces.
Page 289: Cleaning Leather Seats
Note: Do not use Motorcraft Premium Leather and Vinyl Cleaner ZC-56 on Lincoln Black Label, Presidential or Reserve Leathers because it can damage these and other semi-aniline leather seating fabrics. It can also damage surrounding microfiber accent surfaces. To clean Lincoln Black Label, Presidential or Reserve Leather, first vacuum the seats to remove loose dirt.
Page 290: Vehicle Storage
Vehicle Care • To remove tar and grease, use Motorcraft Bug and Tar Remover. • Never apply any cleaning chemical to hot or warm wheel rims or covers. • Some automatic car washes may cause damage to the finish on your wheel rims or covers.
Page 291 Vehicle Care • Lubricate hood latch, all door latches and trunk lid hinges with a light grade oil. • Cover interior trim to prevent fading. • Keep all rubber parts free from oil and solvents. Engine • The engine oil and filter should be changed prior to storage, as used engine oil contains contaminates that may cause engine damage.
Page 292 Vehicle Care Removing Vehicle from Storage When your vehicle is ready to come out of storage, do the following: • Wash your vehicle to remove any dirt or grease film build-up on window surfaces. • Check windshield wipers for any deterioration. •...
Page 293: Wheels And Tires
Wheels and Tires GENERAL INFORMATION Notice to Utility Vehicle, Van and Truck Owners WARNING: Utility vehicles have a significantly higher rollover rate than other types of vehicles. To reduce the risk of serious injury or death from a rollover or other crash you must: •...
Page 294 Wheels and Tires Power is supplied to all four wheels through a transfer case or power transfer unit. Four-wheel drive vehicles allow you to select different drive modes as necessary. You can find information on transfer case operation and shifting procedures in the Transmission chapter. You can find information on transfer case maintenance in the Maintenance chapter.
Page 295: Tire Care
Wheels and Tires • Narrower – to provide greater maneuverability in tight spaces, particularly in off-road use. As a result of the above dimensional differences, sport-utility vehicles, vans and trucks often will have a higher center of gravity and a greater difference in center of gravity between the loaded and unloaded condition.
Page 296 Wheels and Tires Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear 1 ⁄ times as well on the government course as a tire graded 100.
Page 297 Wheels and Tires Glossary of Tire Terminology • Tire label: A label showing the OE (Original Equipment) tire sizes, recommended inflation pressure and the maximum weight the vehicle can carry. • Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size and date of manufacture.
Page 298 Wheels and Tires INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a U.S. DOT Tire Identification Number for safety standard certification and in case of a recall.
Page 299 Wheels and Tires E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheel diameter. F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry.
Page 300 Wheels and Tires H. U.S. DOT Tire Identification Number (TIN): This begins with the letters DOT and indicates that the tire meets all federal standards. The next two numbers or letters are the plant code designating where it was manufactured, the next two are the tire size code and the last four numbers represent the week and year the tire was built.
Page 301 Wheels and Tires M. Maximum Inflation Pressure: Indicates the tire manufacturer’s maximum permissible pressure or the pressure at which the maximum load can be carried by the tire. This pressure is normally higher than the vehicle manufacturer’s recommended cold inflation pressure, which can be found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or Tire Label which...
Page 302 Wheels and Tires Information on T Type Tires T type tires have some additional information beyond those of P type tires. These differences are described below. T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example.
Page 303 Wheels and Tires INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properly inflated. Remember that a tire can lose up to half of its air pressure without appearing flat. Every day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check pressure of all tires and adjust if required.
Page 304 Wheels and Tires Maximum Inflation Pressure is the tire manufacturer’s maximum permissible pressure or the pressure at which the maximum load can be carried by the tire. This pressure is normally higher than the manufacturer’s recommended cold inflation pressure, which can be found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or Tire Label which is located...
Page 305 Wheels and Tires Note: Some spare tires operate at a higher inflation pressure than the other tires. For T-type mini-spare tires, see the Dissimilar Spare Tire and Wheel Assembly Information section. Store and maintain at 60 psi (4.15 bar). For full-size and dissimilar spare tires, see Dissimilar Spare Tire and Wheel Assembly Information under Changing a Road Wheel in this chapter.
Page 306 Wheels and Tires Damage Periodically inspect the tire treads and sidewalls for damage (such as bulges in the tread or sidewalls, cracks in the tread groove and separation in the tread or sidewall). If damage is observed or suspected, have the tire inspected by a tire professional. Tires can be damaged during off-road use, so inspection after off-road use is also recommended.
Page 307 Wheels and Tires Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originally provided by Ford. The recommended tire and wheel size may be found on either the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or the Tire Label...
Page 308 Wheels and Tires WARNING: To reduce the risk of serious injury, when mounting replacement tires and wheels, you should not exceed the maximum pressure indicated on the sidewall of the tire to set the beads without additional precautions listed below. If the beads do not seat at the maximum pressure indicated, re-lubricate and try again.
Page 309 Wheels and Tires Safety Practices WARNING: If your vehicle is stuck in snow, mud, or sand, do not rapidly spin the tires. Spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds. WARNING: Do not spin the wheels at over 35 mph (56 km/h).
Page 310 Wheels and Tires Tire Rotation Note: If your tires show uneven wear ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanical problem involved before tire rotation. Note: Your vehicle may be equipped with a dissimilar spare tire and wheel assembly.
Page 311 Follow these guidelines when using snow tires and chains: • If possible, avoid fully loading your vehicle. • Use only cable type chains or chains offered by Ford/Lincoln as an accessory or equivalent. Other conventional link type chains may contact and cause damage to the vehicle’s wheel house and/or body.
Page 312: Tire Pressure Monitoring System (Tpms)
Wheels and Tires TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge. See Inflating Your Tires in this chapter. Failure to properly maintain your tire pressure could increase the risk of tire failure, loss of control, vehicle rollover and personal injury.
Page 313 Wheels and Tires telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. The tire pressure monitoring system complies with part 15 of the FCC rules and with RSS-210 of Industry Canada.
Page 314 Wheels and Tires When you believe your system is not operating properly The main function of the tire pressure monitoring system is to warn you when your tires need air. It can also warn you in the event the system is no longer capable of functioning as intended.
Page 315 Wheels and Tires Low tire Possible cause Customer action required pressure warning light Flashing warning Spare tire in use Repair the damaged road wheel and light tire and reinstall it on the vehicle to restore system function. For a description on how the system functions, see When your spare tire is installed in this section.
Page 316: Changing A Road Wheel
Wheels and Tires CHANGING A ROAD WHEEL WARNING: The use of tire sealant may damage your tire pressure monitoring system and should only be used in roadside emergencies. If you must use a sealant, the Ford Tire Mobility Kit sealant should be used. The tire pressure monitoring system sensor and valve stem on the wheel must be replaced by an authorized dealer after use of the sealant.
Page 317 Wheels and Tires 2. Full-size dissimilar spare with label on wheel: This spare tire has a label on the wheel that states: THIS TIRE AND WHEEL FOR TEMPORARY USE ONLY When driving with one of the dissimilar spare tires listed above, do not: •...
Page 318 Wheels and Tires • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly, additional caution should be given to: •...
Page 319 Wheels and Tires WARNING: Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided as original equipment with your vehicle, make sure the jack capacity is adequate for the vehicle weight, including any vehicle cargo or modifications.
Page 320 Wheels and Tires Note: Pay close attention to the orientation of the bag, because it will have to be reinstalled after changing the tire. 3. Unsnap the wheel lug nut wrench, jack extension and handle from the plastic tray. 4. Remove the jack from the tray assembly. Removing the Spare Tire 1.
Page 321 Wheels and Tires 11. Position the jack according to the jack locator arrows found on the frame and turn the jack handle and extension tool assembly clockwise. Note: Use the frame rail as the jacking location point, not the control arm. 12.
Page 322 Wheels and Tires 17. Remove the jack and fully tighten the lug nuts in the order shown and reinstall the wheel cover. See Wheel Lug Nut Torque Specifications later in this chapter for the proper lug nut torque specification. 18. Unblock the wheels. 19.
Page 323: Technical Specifications
Wheels and Tires 6. Reinstall the jack bag properly around the jack and tool assembly tray, making sure the strap is securely fastened. 7. Close the access hole with the rubber plug. 8. Reinstall the tray into the vehicle and secure it with the wing nut (turn clockwise until tight).
Page 324: Capacities And Specifications
Capacities and Specifications ENGINE SPECIFICATIONS Engine 3.5L V6 EcoBoost Cubic inches Fuel Minimum 87 octane Firing order 1–4–2–5–3–6 Ignition system Coil on plug Spark plug gap 0.030–0.033 inch (0.75 – 0.85 mm) Compression ratio 10.0:1 DRIVEBELT ROUTING 1. The short drivebelt is on the first pulley groove closest to engine. 2.
Page 325 Capacities and Specifications...
Page 326 Capacities and Specifications...
Page 327 Capacities and Specifications...
Page 328 Capacities and Specifications...
Page 329: Part Numbers
WW-1612 (rear) Motorcraft replacement parts are recommended for scheduled maintenance and are available at your Ford or Lincoln dealer or at fordparts.com. These parts meet or exceed Ford Motor Company’s specifications, and are engineered for your vehicle. Use of other parts may impact vehicle performance, emissions, and durability.
Page 330: Vehicle Identification Number
Capacities and Specifications VEHICLE IDENTIFICATION NUMBER The vehicle identification number is located on the driver’s side instrument panel. XXXXXXXXXXXXXXXXX Please note that in the graphic, XXXX is representative of your vehicle identification number. The Vehicle Identification Number (VIN) contains the following information: A.
Page 331: Vehicle Certification Label
Capacities and Specifications VEHICLE CERTIFICATION LABEL The National Highway Traffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label shall be affixed to either the door hinge pillar, the door latch post, or the edge of the door near the door latch,...
Page 332: Accessories
(United States only). Lincoln Motor Company will repair or replace any properly authorized dealer-installed Lincoln Genuine Accessory found to be defective in factory-supplied materials or workmanship during the warranty period, as well as any component damaged by the defective accessories.
Page 333 • If you or an authorized Lincoln dealer add any non-Lincoln electrical or electronic accessories or components to the vehicle, you may adversely affect battery performance and durability. In addition, you may adversely affect the performance of other electrical systems in the vehicle.
Page 334: Extended Service Plan
Lincoln ESP Can Quickly Pay for Itself One service bill – the cost of parts and labor – can easily exceed the price of your Lincoln Extended Service Plan. With Lincoln ESP, you minimize your risk for unexpected repair bills and rising repair costs.
Page 335 Lincoln ESP has to offer while paying over time. You are pre-approved with no credit checks, no hassles! To learn more, call our Lincoln ESP specialists at 800-367-3377. Lincoln ESP P.O.
Page 336 Extended Service Plan SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a Lincoln Extended Service Plan. Lincoln Extended Service Plan is the only service contract backed by Lincoln Motor Company of Canada, Limited. Depending on the plan you purchase, Lincoln Extended Service Plan provides benefits such as: •...
Page 337: Audio System
Audio System GENERAL INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio reception factors Distance and The further you travel from an FM station,...
Page 338 Audio System MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 track mode (system default) and MP3 folder mode. •...
Page 339 Audio System AM/FM/CD PREMIUM AUDIO SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 340 Audio System REAR AUDIO CONTROLS Your vehicle is equipped with rear seat audio controls. This allows front and middle seat passengers to simultaneously control the vehicle media sources (radio, CD or SYNC). A. VOL: Press this button to increase or decrease the volume of playing. B.
Page 341 Audio System HD RADIO™ INFORMATION (IF AVAILABLE) Note: HD Radio broadcasts are not available in all markets. HD Radio technology is the digital evolution of analog AM/FM radio. Your system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives.
Page 342 Audio System HD Radio Reception and Station Troubleshooting Potential reception issues Reception area If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength. If you are listening to HD1, the system switches back to the analog broadcast until the digital broadcast is available again.
Page 343 Audio System Potential station issues Issue Cause Action Sound fading or The radio is shifting No action required. blending in and out. between analog and The reception issue digital audio. may clear up as you continue to drive. There is an audio The digital multicast is No action required.
Page 344: Satellite Radio Information
Audio System SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels Sirius broadcasts a variety of music, news, sports, weather, traffic and entertainment satellite radio channels. For more information and a complete list of Sirius satellite radio channels, visit www.siriusxm.com in the United States, www.sirius.ca in Canada, or call Sirius at 1–888–539–7474.
Page 345 Audio System Sirius Satellite Radio Service Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
Page 346 Audio System Troubleshooting Radio display Condition Possible action Acquiring Radio requires more No action required. than two seconds to This message should produce audio for the disappear shortly. selected channel. Sat Fault/SIRIUS There is an internal If this message does system failure module or system not clear shortly, or...
Page 347 Audio System Radio display Condition Possible action None Found. Check All the channels in the Use the channel guide Channel Guide. selected category are to turn off the Lock or either skipped or Skip function on that locked. station. Subscription Updated Sirius has updated the No action required.
Page 348 NOTE: You can also set up the certain convenience features using MyLincoln Mobile over the internet or smartphone application. For more information on MyLincoln Mobile, and to set up your MyLincoln Mobile account, visit http://support.lincoln.com/owner-services/mylincoln-mobile-app. A. Phone B. Navigation (or Information if your vehicle is not equipped with Navigation) C.
Page 349: Mylincoln Touch
MyLincoln Touch™ This system uses a four-corner strategy to provide quick access several vehicle features and settings. The touchscreen provides easy interaction with your cellular phone, multimedia, climate control and navigation system. The corners display any active modes within those menus, such as phone status or the climate temperature.
Page 350 MyLincoln Touch™ SETTINGS Press to select any of the following: • Clock • Display • Sound • Vehicle • Settings • Help HOME Press to access your home screen. Depending on your vehicle’s option package and software, your screens may vary in appearance from the descriptions in this section.
Page 351 MyLincoln Touch™ Using the Touchscreen To turn a feature on and off, just touch the graphic with your finger. To get the best performance from the touch-sensitive controls: • Make sure your hands are clean and dry. • Press firmly on the center of a control graphic or menu item. •...
Page 352 MyLincoln Touch™ Cleaning the Touchscreen Display Use a clean, soft cloth such as one used for cleaning glasses. If dirt or fingerprints are still visible, apply a small amount of alcohol to the cloth. Do not pour or spray alcohol onto the display. Do not use detergent or any type of solvent to clean the display.
Page 353 MyLincoln Touch™ Speed-restricted Features Some features of this system may be too difficult to use while your vehicle is moving so they are restricted from use unless your vehicle is stationary. • Screens that are too crowded with information, such as Point of Interest reviews and ratings, Sirius Travel Link sports scores, movie times and ski conditions.
Page 354 It is recommended that new owners conduct a Master Reset upon taking possession of the vehicle to remove it from any existing MyLincoln Mobile accounts. The new owner can activate a MyLincoln Mobile account by going to http://support.lincoln.com/owner-services/mylincoln-mobile-app and following the registration process.
Page 355 MyLincoln Touch™ ACCESSING AND ADJUSTING MODES THROUGH YOUR RIGHT VEHICLE INFORMATION DISPLAY The display is located on the right side of your instrument cluster. You can use your steering wheel controls to view and make minor adjustments to active modes without taking your hands off the wheel. For example: •...
Page 356: Voice Recognition
MyLincoln Touch™ USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you. The system provides feedback through audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of interaction (voice settings).
Page 357 MyLincoln Touch™ Helpful Hints • Make sure the interior of your vehicle is as quiet as possible. Wind noise from open windows and road vibrations may prevent the system from correctly recognizing spoken commands. • After pressing the voice icon, wait until after the tone sounds and Listening appears before saying a command.
Page 358 MyLincoln Touch™ Voice Settings Voice settings allow you to customize the level of system interaction, help and feedback. The system defaults to standard interaction that uses candidate lists and confirmation prompts as these provide the highest level of guidance and feedback. Interaction Mode: Novice mode provides detailed interaction and guidance while the advanced mode has less audible interaction and more tone prompts.
Page 359 MyLincoln Touch™ Using Voice Commands with the Touchscreen Options Your voice system has a dual mode feature which allows you to switch between using voice commands and making on-screen selections. This is available only when the system displays a list of candidates generated during a voice session.
Page 360 MyLincoln Touch™ Browsing Device Content When listening to audio on a device, you can browse through other devices without having to change sources. For example, if you are currently listening to audio on an SD card, you can browse all the artists that are stored on your USB device.
Page 361: Listening To Music
MyLincoln Touch™ Your voice system allows you to change audio sources with a simple voice command. For example, if you are listening to music on a USB device, then want to switch to a satellite radio channel, simply press the voice button on the steering wheel controls and say the name of the Sirius station (such as, “the Highway”).
Page 362 MyLincoln Touch™ Scan Touch this button to go to the next strong AM or FM radio station. The light on the button illuminates when the feature is on. Options Sound Settings allows you to adjust settings for: • Bass • Midrange •...
Page 363 MyLincoln Touch™ more information, and a guide to available stations and programming, please visit www.hdradio.com. When HD Radio is on and you tune to a station broadcasting HD Radio technology, you may notice the following indicators on your screen: HD) logo is grey when acquiring a digital station, and then changes to orange when digital audio is playing.
Page 364 MyLincoln Touch™ HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength. If you are listening to HD1, the system switches back to the analog broadcast until the digital broadcast is available again.
Page 365 MyLincoln Touch™ Potential station issues Issue Cause Action Sound fading or The radio is shifting No action required. blending in and out. between analog and The reception issue digital audio. may clear up as you continue to drive. There is an audio The digital multicast is No action required.
Page 366 MyLincoln Touch™ Radio Voice Commands If you are listening to the radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the radio, press the voice button and, after the tone, say “Radio”, then any of the commands in the following chart.
Page 367 MyLincoln Touch™ Sirius Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select the SIRIUS tab. Presets Save a channel by pressing and holding one of the memory preset areas. There is a brief mute while the radio saves the channel. Sound returns when finished.
Page 368 MyLincoln Touch™ Set Category for Seek/Scan allows you to select a category of music you would like to search for. You can then choose to either seek or scan for the stations playing that category. Parental Lockout allows you to lock and unlock channels, change or reset your PIN or unlock all channels.
Page 369 MyLincoln Touch™ Satellite Radio Voice Commands If you are listening to Sirius satellite radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to Sirius satellite radio, press the voice button and, after the tone, say “Sirius”, then any of the commands in the following chart.
Page 370 MyLincoln Touch™ “TUNE” “SAT 3” “SAT 3 preset <#>” “Help” Sirius Satellite Radio Information Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
Page 371 MyLincoln Touch™ Potential satellite radio reception issues Station overload When you pass a ground-based broadcast-repeating tower, a stronger signal may overtake a weaker one and the audio system may mute. Satellite radio signal Your display may show ACQUIRING . . . to interference indicate the interference and the audio system may mute.
Page 372 MyLincoln Touch™ Sirius troubleshooting tips Radio display Condition Possible action Updating. Update of channel No action required. programming in The process may take progress. up to three minutes. Call SIRIUS Your satellite service is Contact Sirius at 1–888–539–7474. no longer available. 1-888-539-7474 to resolve subscription issues.
Page 373 MyLincoln Touch™ Options Sound Settings allows you to adjust settings for: • Bass • Midrange • Treble • Balance and Fade • DSP (Digital Signal Processing) • Occupancy Mode • Speed Compensated Volume. Note: Your vehicle may not have all these sound settings. Compression allows you to turn the compression feature on and off.
Page 374 MyLincoln Touch™ SD Card Slot and USB Port SD Card Slot Note: Your SD card slot is spring-loaded. To remove the SD card, press the card in and the system ejects it. Do not attempt to pull the card to remove it as this could cause damage.
Page 375 MyLincoln Touch™ Playing Music from Your Device Note: The system is capable of indexing up to 30,000 songs. Insert your device and select the SD Card or USB tab once the system recognizes it. You can then select from the following options: Repeat replays the currently playing song or album.
Page 376 MyLincoln Touch™ SD Card and USB Voice Commands If you are listening to a USB device or an SD card, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to a USB device or an SD card, press the voice button and, after the tone, say “USB”...
Page 377 MyLincoln Touch™ “BROWSE” “All artists” “Artist <name>” “All audiobooks” “Audiobook <name>” “All authors” “Author <name>” “All composers” “Composer <name>” “All folders” “Folder <name>” “All genres” “Genre <name>” “All movies” “Playlist <name>” “All music videos” “Podcast <name>” “All playlists” “TV show <name>” “All podcasts”...
Page 378 MyLincoln Touch™ Bluetooth Audio Your system allows you to stream audio over your vehicle’s speakers from your connected, Bluetooth-enabled cellular phone. To access, press the lower left corner on the touchscreen, then select the BT Stereo tab. Bluetooth Audio Voice Commands If you are listening to a Bluetooth audio device, press the voice button on the steering wheel control.
Page 379 MyLincoln Touch™ The auxiliary input jack allows you to connect and play music from your portable music player through your vehicle speakers. You can use any portable music player designed for use with headphones. Your audio extension cable must have male ⁄...
Page 380 MyLincoln Touch™ PHONE A. Phone B. Quick Dial C. Phonebook D. History E. Messaging F. Settings Hands-free calling is one of the main features of SYNC. Once you pair your phone, you can access many options using the touchscreen or voice commands.
Page 381: Phone Features
MyLincoln Touch™ Pairing Your Phone for the First Time WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road.
Page 382 MyLincoln Touch™ 4. When prompted on your phone’s display, confirm that the PIN provided by SYNC matches the PIN displayed on your cellular phone. 5. The display indicates when the pairing is successful. SYNC may prompt you with more phone options. For more information on your phone’s capability, see your phone’s user guide and visit the website.
Page 383 MyLincoln Touch™ Phonebook Touch this button to access and call any contacts in your previously downloaded phone book. The system places the entries in alphabetical categories summarized at the top of the screen. To turn on contact picture settings, if your device supports this feature, press Phone >...
Page 384 MyLincoln Touch™ Composing a Text Message Note: This is a speed-dependent feature. It is unavailable when your vehicle is traveling at speeds over 3 mph (5 km/h). Note: Downloading and sending text messages using Bluetooth are phone-dependent features. 1. Touch the top left corner of the display to access the Phone menu. 2.
Page 385 MyLincoln Touch™ • Ignore to exit the screen. Note: If you select View and your vehicle is traveling over 3 mph (5 km/h), the system offers to read the message to you instead of allowing you to view it while driving. Phone Settings Press Phone >...
Page 386 MyLincoln Touch™ Roaming Warning Touch this button to have the system alert you when your phone is in roaming mode. Phone Voice Commands Press the voice button on the steering wheel control. After the tone, say any of the following commands: “PHONE”...
Page 387: Information Menu
MyLincoln Touch™ INFORMATION If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. Under the Information menu, you can access features, such as: A.
Page 388 MyLincoln Touch™ Note: This feature does not function properly if you have enabled caller ID blocking on your mobile phone. Make sure your mobile phone is not blocking caller ID before using SYNC Services. Note: The driver is ultimately responsible for the safe operation of the vehicle, and therefore, must evaluate whether it is safe to follow the suggested directions.
Page 389 MyLincoln Touch™ Connecting to SYNC Services Using the Touchscreen If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Services.
Page 390 MyLincoln Touch™ If your vehicle is equipped with Navigation, SYNC Services downloads your requested destination to the navigation system. The navigation system then calculates the route and provides driving instructions. See the Navigation system section for more information. Disconnecting from SYNC Services 1.
Page 391 MyLincoln Touch™ “SERVICES” “Services” “Update route” “Help” Sirius Travel Link (If Equipped and If Activated) WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road.
Page 392 MyLincoln Touch™ Movie Listings Touch this button to view nearby movie theaters and their show times, if available. Weather Touch this button to view the nearby weather, current weather, or the five day forecast for the chosen area. Select Map to see the weather map, which can show storms, radar information, charts and winds.
Page 393 MyLincoln Touch™ Sports headlines, sports schedules and sports scores voice commands “College football” “NFL” “Golf” “NHL” “MLS” “WNBA” “Motor sports” “TRAVEL LINK” “5–day weather “Golf schedule” “NBA scores” forecast” “Baseball headlines” “MLS headlines” “NFL headlines” “Baseball schedule” “MLS schedule” “NFL schedule” “Baseball scores”...
Page 394 MyLincoln Touch™ Alerts If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Alerts, and then choose from any of the following services: •...
Page 395 MyLincoln Touch™ Note: The SYNC 911 Assist feature must be set on prior to the incident. Note: Before setting this feature on, make sure that you read the 911 Assist privacy notice later in this section for important information. Note: If any user turns 911 Assist on or off, that setting applies for all paired phones.
Page 396 MyLincoln Touch™ • A connected Bluetooth-enabled phone must have adequate network coverage, battery power and signal strength. • The vehicle must have battery power and be located in the United States, Canada or in a territory in which 911 is the emergency number. In the Event of a Crash Not all crashes deploy an airbag or activate the fuel pump shut-off (which would trigger 911 Assist);...
Page 397 MyLincoln Touch™ Vehicle Health Report (If Equipped, United States Only) WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannot replace, normal maintenance and vehicle inspection. Vehicle Health Report only monitors certain systems electronically monitored by your vehicle and will not monitor or report the status of any other system, (such as brake lining wear).
Page 398 MyLincoln Touch™ The system allows you to check your vehicle’s overall health in the form of a diagnostic report card. The Vehicle Health Report contains valuable information, such as: • Vehicle Diagnostic Information • Scheduled maintenance • Open Recalls and Field Service Actions •...
Page 399: Settings
MyLincoln Touch™ SETTINGS A. Clock B. Display C. Sound D. Vehicle E. Settings F. Help Under this menu, you can set your clock, access and adjust the display, sound and vehicle settings as well as access settings for specific modes or the help feature. Clock Note: You cannot manually set the date.
Page 400 MyLincoln Touch™ Display You can adjust the touchscreen display through the touchscreen or by pressing the voice button on your steering wheel controls and when prompted, say, “Display settings”. Press the Settings icon > Display, to access and make adjustments using the touchscreen. •...
Page 401 MyLincoln Touch™ Sound Press the Settings icon > Sound, then select from the following: Sound Settings Bass Midrange Occupancy Mode Treble Speed Compensated Volume Set Balance and Fade If equipped. Vehicle Press the Settings icon > Vehicle, then select from the following: •...
Page 402 MyLincoln Touch™ Camera Settings This menu allows you to access settings for your rear view camera. Press the Settings icon > Vehicle > Camera Settings, then select from the following settings: • Enhanced Park Aids. • Rear Camera Delay. Enable Valet Mode Valet mode allows you to lock the system.
Page 403 MyLincoln Touch™ System Install Applications Install any downloaded applications or view the current software licenses. Master Reset Select to restore factory defaults. This erases all personal settings and personal data. Voice Control Press the Settings icon > Settings > Voice Control, then select from the following: Voice control Interaction Mode...
Page 404 MyLincoln Touch™ Media Player Press the Settings icon > Settings > Media Player, then select from the following: Media player Autoplay When this feature is on, the system automatically switches to the media source upon initial connection. This allows you to listen to music during the indexing process.
Page 405 MyLincoln Touch™ Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top to bottom or bottom to top. Turn the Parking POI notification on and off. Route Preferences Preferred Route allows you to choose to have the system display the Shortest,...
Page 406 MyLincoln Touch™ Navigation Traffic Preferences Have the system display areas where roadwork occurs. Have the system display incident icons. Have the system display areas where difficult driving conditions may occur. Have the system display areas where snow and ice on the road may occur. Have the system display any smog alerts.
Page 407 MyLincoln Touch™ Phone Settings Press the Settings icon > Settings > Phone, then select from the following: Phone Bluetooth Devices Connect, disconnect, add or delete a device, as well as save it as a favorite. Bluetooth Turn Bluetooth on and off. Do Not Disturb Have all calls go directly to your voice mail and not ring inside your vehicle.
Page 408 MyLincoln Touch™ Wireless & Internet Your system has a Wi-Fi feature that creates a wireless network within your vehicle, thereby allowing other devices (such as personal computers or phones) in your vehicle to speak to each other, share files or play games.
Page 409 MyLincoln Touch™ Wireless & Internet USB Mobile Instead of using Wi-Fi, your system can also Broadband use a USB mobile broadband connection to access the internet. (You must turn on your mobile broadband device on your personal computer before connecting it to the system.) This screen allows you to set up what is your typical area for your USB mobile broadband connection.
Page 410 MyLincoln Touch™ Help Press the Settings icon > Help, then select from the following: Help View your vehicle’s current location, if your Where Am I? vehicle is equipped with navigation. If your vehicle is not equipped with navigation, nothing displays. Touchscreen system serial number.
Page 411 MyLincoln Touch™ CLIMATE Touch the lower right corner on the touchscreen to access your climate control features. Depending on your vehicle line and option package, your climate screen may look different from this screen. Note: You can switch temperature units between Fahrenheit and Celsius. See Settings in this chapter.
Page 412 MyLincoln Touch™ C. Fan speed: Touch + or - to increase or decrease the volume of air circulated in your vehicle. Note: When the system is controlling the fan speed automatically, all the fan speed indicators turn off. D. Rear: Touch to access the rear climate control. Rear climate control settings appear at the bottom of the screen.
Page 413 MyLincoln Touch™ I. Heated rear window: Turns the heated rear window on and off. See Heated windows and mirrors in the Climate Control chapter. J. Defrost: Touch the button to distribute air to the windshield vents and de-mister. Air distribution to instrument panel and footwell vents turn off.
Page 414 MyLincoln Touch™ Climate control voice commands “Climate temperature <60–85> degrees” “Help” There are additional climate control commands but in order to access them, you have to say “Climate” first, then when the system is ready to listen, you may say any of the following commands: Additional climate control voice commands “Automatic”...
Page 415: Navigation System
MyLincoln Touch™ NAVIGATION SYSTEM (IF EQUIPPED) Note: The navigation SD card must be in the SD card slot to operate the navigation system. If you need a replacement SD card, see your authorized dealer. Note: The SD card slot is spring-loaded. To remove the SD card, just push the card in and release it.
Page 416 MyLincoln Touch™ tollroads, ferries and car trains as well as to use or not use high-occupancy vehicle lanes. (High-occupancy vehicle lanes are also known as carpool or diamond lanes. People who ride in buses, vanpools or carpools use these lanes.) Note: If your vehicle is on a recognized road and you do not press the Start Route button, the system defaults to the Fastest Route option and begins guidance.
Page 417 MyLincoln Touch™ When programming a point of interest destination, the system allows you to sort the resulting lists alphabetically, by distance or by cityseekr listings (if available). Pressing the Search Areas button allows you to search for points of interest nearby, near a city or state or near a destination, if a route is active. Pressing the Search By Name button allows you to directly enter the point of interest name into the system by using the keyboard.
Page 418 MyLincoln Touch™ Nightlife Attraction This icon appears when your selection exists in multiple categories within the system. When you are viewing more information for hotels, cityseekr also tells you if the hotel has certain services and facilities using icons. Hotel services and facilities Restaurant 24 Hr Room Service Business Center...
Page 419 MyLincoln Touch™ Parking POI Notification sets the automatic parking points of interest notification. Turn this feature ON or OFF. When parking points of interest notification is on, the icons display on the map when you get close to your destination. This may not be very useful in dense areas, and may clutter the map when other points of interest display.
Page 420 MyLincoln Touch™ Other traffic alert features allows you to turn on certain, or all, traffic icons on the map such as road work, incident, accidents and closed roads. Scroll down to view all the different types of alerts. Turn these features ON or OFF.
Page 421 MyLincoln Touch™ North up (2D map) always shows the northern direction to be upward on the screen. 3D map mode provides an elevated perspective of the map. This viewing angle can be adjusted and the map can be rotated 180 degrees by touching the map twice, and then dragging your finger along the shaded bar with arrows at the bottom of the map.
Page 422 MyLincoln Touch™ Map Icons Vehicle mark shows the current location of your vehicle. It stays in the center of the map display, except when in scroll mode. Scroll cursor allows you to scroll the map; the fixed icon is in the center of the screen.
Page 423 MyLincoln Touch™ Quick-touch Buttons When in map mode, touch anywhere on the map display to access more features. Set as Dest Touch this button to select a scrolled location on the map as your destination. You may scroll the map by pressing your index finger on the map display.
Page 424 MyLincoln Touch™ Navigation Voice Commands When in navigation mode, press the voice button on the steering wheel control. After the tone, say any of the following commands: Navigation system voice commands “Cancel next waypoint” “Navigation” “Cancel route” “Navigation voice volume decrease”...
Page 425 MyLincoln Touch™ “DESTINATION” “Intersection” “Nearest <POI category>” “Nearest POI” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NAVIGATION” “Destination” “Zoom city” “Zoom country” “Zoom in minimum” “Zoom out maximum” “Zoom province” “Zoom state” “Zoom street” “Zoom to <distance>” “Help” If you have said, “Destination”, you may say any of the commands in the Destination chart.
Page 426 Appendices GENERAL INFORMATION SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMPANY from an affiliate of Microsoft Corporation (“MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online”...
Page 427 Appendices DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS: • Speech Recognition: If the SOFTWARE includes speech recognition component(s), you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process. Neither FORD MOTOR COMPANY nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process.
Page 428 Appendices SOFTWARE’s ability to use WMDRM to play or copy protected content. This action does not affect unprotected content. When your DEVICE downloads licenses for protected content, you agree that Microsoft may include a revocation list with the licenses. Content owners may require you to upgrade the SOFTWARE on your DEVICE to access their content.
Page 429 Appendices provided, then the terms of this EULA shall apply, except that the MS, Microsoft Corporation or affiliate entity providing the Supplemental Component(s) shall be the licensor of the Supplemental Component(s). FORD MOTOR COMPANY, MS, Microsoft Corporation, their affiliates and/or their designated agent reserve the right to discontinue without liability any Internet-based services provided to you or made available to you through the use of the SOFTWARE.
Page 430 Appendices property rights in and to the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not specifically granted under this EULA are reserved by MS, Microsoft Corporation, FORD MOTOR COMPANY, third party software and service providers, their affiliates and suppliers.
Page 431 Appendices End user notice Microsoft® Windows® Mobile for Automotive Important Safety Information This system Ford SYNC contains software that is licensed to Manufacturer FORD MOTOR COMPANY by an affiliate of Microsoft Corporation pursuant to a license agreement. Any removal, reproduction, reverse engineering or other unauthorized use of the software from this system in violation of the license agreement is strictly prohibited and may subject you to legal action.
Page 432 Appendices Prolonged Views of Screen Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time.
Page 433 Appendices Potential Map Inaccuracy Maps used by this system may be inaccurate because of changes in roads, traffic controls or driving conditions. Always use good judgment and common sense when following the suggested routes. Emergency Services Do not rely on any navigation features included in the system to route you to emergency services.
Page 434 Appendices Software instructs you to perform an unsafe or illegal maneuver, places you in an unsafe situation, or directs you into an area that you consider to be unsafe, do not follow such instructions; (c) do not input destinations, or otherwise manipulate the Telenav Software, unless your vehicle is stationary and parked;...
Page 435 Appendices Software; or (e) use the Telenav Software in any manner that (i) infringes the intellectual property or proprietary rights, rights of publicity or privacy or other rights of any party, (ii) violates any law, statute, ordinance or regulation, including but not limited to laws and regulations related to spamming, privacy, consumer and child protection, obscenity or defamation, or (iii) is harmful, threatening, abusive, harassing, tortuous, defamatory, vulgar, obscene, libelous, or otherwise...
Page 436 Appendices ACCESS DATA, LOSS OF DATA, LOSS OF BUSINESS, LOSS OF PROFITS, BUSINESS INTERRUPTION OR THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE THE TELENAV SOFTWARE, EVEN IF TELENAV HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Page 437 Appendices in immediate termination of this Agreement, without liability to Telenav, in which case you and all other parties shall immediately cease all use of the Telenav Software. Notwithstanding the foregoing, Telenav may assign this Agreement to any other party at any time without notice, provided the assignee remains bound by this Agreement.
Page 438 Appendices 9. Other Vendors Terms and Conditions The Telenav Software utilizes map and other data licensed to Telenav by third party vendors for the benefit of you and other end users. This Agreement includes end-user terms applicable to these companies (included at the end of this Agreement), and thus your use of the Telenav Software is also subject to such terms.
Page 439 Appendices License Limitations on Transfer: Your limited license does not allow transfer or resale of the Data, except on the condition that you may transfer the Data and all accompanying materials on a permanent basis if: (a) you retain no copies of the Data; (b) the recipient agrees to the terms of this End-User License Agreement;...
Page 440 Appendices Disclaimer of Liability: HERE AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSESSION OF THIS DATA;...
Page 441 Appendices disputes, claims and actions arising from or in connection with the Data (“Claims”), you agree to submit to the personal jurisdiction of (a) the State of Illinois for Claims related to Data for the Americas and/or the Asia Pacific region provided to you hereunder, and (b) The Netherlands for Data for Europe, the Middle East and/or Africa provided to you hereunder.
Page 442 Appendices Gracenote® Copyright CD and music — related data from Gracenote, Inc., copyright 2000–2007 Gracenote. Gracenote Software, copyright 2000–2007 Gracenote. This product and service may practice one or more of the following U.S. Patents #5,987,525; #6,061,680; #6,154,773, #6,161,132, #6,230,192, #6,230,207, #6,240,459, #6,330,593, and other patents issued or pending.
Page 443 Appendices respectively, reserve all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers and Gracenote Content, including all ownership rights. Under no circumstances will either Gracenote become liable for any payment to you for any information that you provide, including any copyrighted material or music file information.
Page 444 Appendices Vehicle with SYNC only FCC ID: KMHSG1G1 IC: 1422A-SG1G1 Vehicle with SYNC and MyFord Touch or MyLincoln Touch FCC ID: KMHSYNCG2 IC: 1422A-SYNCG2 This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 445: Scheduled Maintenance
Scheduled Maintenance GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against major repair expenses resulting from neglect or inadequate maintenance and may help to increase the value of your vehicle when you sell or trade it. Keep all receipts for completed maintenance with your vehicle.
Page 446 Scheduled Maintenance Protecting Your Investment Maintenance is an investment that will pay dividends in the form of improved reliability, durability and resale value. To maintain the proper performance of your vehicle and its emission control systems, it is imperative that scheduled maintenance be completed at the designated intervals.
Page 447 Scheduled Maintenance Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristic and, by itself, does not necessarily indicate a concern or that the fluid needs to be changed. However, discolored fluids that also show signs of overheating and foreign material contamination should be inspected immediately by a qualified expert, such as the factory-trained technicians at your dealership.
Page 448 Scheduled Maintenance Multi-point Inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly. This can help identify potential issues and prevent major problems. Ford Motor Company recommends the following multi-point inspection be performed at every scheduled maintenance interval to help make sure your vehicle keeps running great.
Page 449 Scheduled Maintenance...
Page 450 Scheduled Maintenance NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil-Life Monitor® Your vehicle is equipped with an Intelligent Oil-Life Monitor that determines when the engine oil needs to be changed based on how your vehicle is used. By using several important factors in its calculations, the monitor helps reduce the cost of owning your vehicle and reduce environmental waste at the same time.
Page 451 Scheduled Maintenance Normal scheduled maintenance At every oil change Change engine oil and filter. interval as indicated by Rotate tires, inspect tire wear and measure the information display tread depth. Perform multi-point inspection (recommended). Inspect automatic transmission fluid level (if equipped with dipstick).
Page 452 Scheduled Maintenance Other maintenance items Every 30000 miles Replace climate-controlled (heated and (48000 km) cooled) seat filter (if equipped). Replace engine air filter. At 100000 miles Change engine coolant. (160000 km) Every 100000 miles Replace spark plugs. (160000 km) Inspect accessory drive belt(s). Every 150000 miles Change automatic transmission fluid and filter.
Page 453 Scheduled Maintenance Maintenance Schedule Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS...
Page 454 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 455 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 456 Scheduled Maintenance SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For specific recommendations, see your dealership service advisor or technician.
Page 457 Scheduled Maintenance Extensive idling or low-speed driving for long distances as in heavy commercial use (such as delivery, taxi, patrol car or livery) As required Change engine oil and filter as indicated by the information display and perform services listed in the Normal Scheduled Maintenance chart.
Page 458 Scheduled Maintenance Off-road operation Inspect frequently, Inspect steering linkage, ball joints and service as required U-joints. Lubricate if equipped with grease fittings. Replace engine air filter. Every 5000 miles Change engine oil and filter. (8000 km) or six Inspect wheels and related components for months abnormal noise, wear, looseness or drag.
Page 459 Scheduled Maintenance Special Operating Condition Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#:...
Page 460 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 461 Scheduled Maintenance EXCEPTIONS Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks equipped with Ford-design axles are lubricated for life; do not check or change fluid unless a leak is suspected, service is required or the assembly has been submerged in water.
Page 462 Scheduled Maintenance ENGINE COOLANT CHANGE RECORD Initial change Six years or 100000 miles (160000 km) (whichever comes first) After initial change Every three years or 50000 miles (80000 km) Engine Coolant Change Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS...
Page 463 Index 911 Assist™ ......393 Automatic transmission driving an automatic overdrive .........172 fluid, adding ......268 ABS (see Brakes) .....186 fluid, checking ......268 Accessing and using your fluid, refill capacities ....324 USB port ........373 fluid, specification ....324 Selectshift (SST) ....174 Accessing your calendar ..393 Auxiliary Input Jack ....369 Accessory delay ......94 Auxiliary powerpoint ....152...
Page 464: Dual Automatic Temperature Control
Index Cruise control ......202 Customer Assistance ....237 Capacities for refilling fluids ..324 Ford Extended Service Plan ..........333 Cargo management system ..218 Getting roadside assistance ...237 CD ..........338 Getting the service you CD player ......336, 371 need .........243 Ordering additional owner’s CD voice commands ....372 literature .........249 Cell phone use ......16...
Page 465 Index Engine ........323 quality ........163 cleaning ........283 running out of fuel ....164 safety information relating to coolant ........264 fail-safe cooling .......267 automotive fuels .....162 idle speed control ....270 Fuel - flex fuel vehicle (FFV) ..163 lubrication specifications ..324 Fuses ........251, 256 refill capacities ......324 service points ......262 Engine block heater ....160...
Page 466 Index Lane change indicator (see Turn signal) ......91 Ignition ........323 LATCH anchors ......23 Liftgate ........71 Illuminated visor mirror .....98 Lights, warning and indicator ..101 Inspection/maintenance (I/M) testing ........171 Listening to music ....358 Instrument panel Loading instructions ....218 cleaning ........287 Load limits .........212 cluster ........101 Locks lighting up panel and...
Page 467 Index fluid, specifications ....324 Power Windows ......93 Navigation features ....414 Privacy information ....353 Navigation voice commands ..423 Push button start system ..156 Notifications ......393 Octane rating ......164 Quick touch buttons ....422 Pairing other phones ....380 Radio ..........338 Pairing your phone ....380 AM/FM ........360 Single CD ........338 Pairing your phone for the...
Page 468 Index Sending new text messages ..383 Setting a destination ....414 Safety Belt Maintenance ....42 Setting a destination by Safety belts voice ...........414 (see Safety restraints) ....36 Settings ........398 Safety defects, reporting ..250 Setting the clock .......398 Safety information ....351 Safety restraints ....36–37, 39 Side air curtain ......49 Belt-Minder®...
Page 469: Wrecker Towing
Index Supported player, media Traffic preferences ....417 formats and metadata Trailer sway control ....223 information ........376 Transmission Suspension ........210 brake-shift interlock (BSI) ..176 SYNC® customer support ..351 fluid, checking and adding SYNC® Services ......386 (automatic) ......268 fluid, refill capacities ....324 System settings ......401 lubricant specifications ..324 Turn signal ........91...

This manual is also suitable for:

2015 navigator

Lincoln NAVIGATOR 2015 Owner's Manual

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Introduction

Child Safety

Safety Belts

Supplementary Restraints System

Keys and Remote Control

Wipers and Washers

Windows and Mirrors

Instrument Cluster

Climate Control

Seats

Universal Garage Door Opener (if Equipped) 147

Auxiliary Power Points

Storage Compartments

Starting and Stopping the Engine

Quick Links

Troubleshooting

Related Manuals for Lincoln NAVIGATOR 2015

Summary of Contents for Lincoln NAVIGATOR 2015