Dubbing Still Images Recorded On A Tape To A Memory Card; Setting Print Information (Dpof Setting) - JVC 0303-MK-ID-SN Instructions Manual

Dubbing Still Images Recorded On A
Tape To A Memory Card
Still images can be dubbed from a tape to a memory
card.
1
Load a memory card (
( pg. 9).
2
Set the VIDEO/MEMORY Switch
then set the Power Switch
$
down the Lock Button
3
4
Press MENU . The Menu Screen appears. Press +
5
or – to select " VIDEO" and press SELECT/SET
3
.
4
5
Press + or – to select "
3
press SELECT/SET . The Sub Menu appears. Press
5
+ or – to select "ON" and press SELECT/SET
Selection is complete.
5
5
Press + or – to select "
3
SELECT/SET twice. The normal playback screen
reappears.
6
To select a video image to be dubbed, start
playback by pressing 4/6
the image you wish to dub, press it again to engage
Still Playback.
7
To start dubbing, press SNAPSHOT
selected image is stored on the memory card.
• " " blinks during dubbing.
NOTES:
9
If SNAPSHOT is pressed in step 7 when a memory
card is not loaded, the message "COPYING FAILED" is
displayed.
To change the Snapshot mode for dubbing,
If an image recorded on the tape using the WIDE mode
( pg. 33) is dubbed to a memory card, the WIDE mode
identifying signal is not dubbed with it.
To use Playback Special Effects with a video image you
wish to dub, perform up to step 7 using the remote control
( pg. 39).
Images are dubbed in 640 x 480 pixels.
I V DEO
COPY – OF F
ON
Menu Screen
pg. 11) and cassette
t
to "VIDEO",
@
to " " while pressing
.
COPY" and
RETURN" and press
!
. At the moment you find
9
. The
pg. 29.
Display
Setting Print Information
This camcorder is compatible with the DPOF (Digital
Print Order Format) standard in order to support future
systems such as automatic printing, which records
information about the still images you wish to print
(such as the number of prints to make). There are 2
print information settings available: "TO PRINT ALL
STILL IMAGES (ONE PRINT FOR EACH)" explained
below and "TO PRINT BY SELECTING STILL IMAGES
AND NO. OF PRINTS".
TO PRINT ALL STILL IMAGES
(ONE PRINT FOR EACH)
1
Set the VIDEO/MEMORY switch
then set the Power Switch
3
.
down the Lock Button
• Make sure an IMAGE file is displayed (
"Normal Playback").
2
Press MENU
3
Press + or –
SELECT/SET
4
Press + or –
SELECT/SET
Screen appears.
5
Press + or –
SELECT/SET
appears.
• To cancel selection, press + or –
"RETURN" and press SELECT/SET
To Reset The Setting . . .
..... select "RESET" in step 4. The setting is reset to 0
for all still images.
TO PRINT BY SELECTING STILL IMAGES AND
NO. OF PRINTS
1
Perform steps 1 through 3 of "TO PRINT ALL STILL
IMAGES (ONE PRINT FOR EACH)".
2
Press + or –
SELECT/SET
Screen appears.
4 4 6 6
3
Turn the SHUTTLE SEARCH Ring
counterclockwise (2) or clockwise (3) so that the
image you wish to print appears.
4
Press + or –
SHEETS number indication and press SELECT/SET
3
.
(DPOF Setting)
t
@
to " ", while pressing
$
located on the switch.
4
. The Menu Screen appears.
5
to select "DPOF" and press
3
. The Sub Menu appears.
5
to select "ALL 1" and press
3
. Selection is complete. The DPOF
5
to select "EXECUTE" and press
3
. The normal playback screen
5
to select
3
5
to select "CURRENT" and press
3
. Selection is complete. The DPOF
#
5
to move the highlight bar to the
Continued on next page.
ADVANCED FEATURES
to "MEMORY",
pg. 18,
.
EN
23