JVC 1010MTH-SW-MT Instructions Manual page 26

Dubbing/Importing
Formatting (Continued)
5 Select "YES", and press the [OK] button in the
format confirmation screen
.
Formatting starts.
After formatting is complete, a "THE DISC HAS BEEN
FORMATTED" message appears on the monitor, and the
normal screen is displayed.
.
Memo:
To return to the initial screen without formatting the disc,
select "DO NOT FORMAT" and press the [OK] button.
Alternatively, you can press the [RETURN] button to return
to the initial screen without formatting.
Note:
Do not turn off the power or unplug the power cable when
the "FORMATTING DISC..." message is displayed.
Note that formatting a disc with copyright-protected titles
erases all the titles from the disc.
26
Cancel formatting
1 Press the [OPTION] button while formatting
.
2 Select "STOP" and press the [OK] button
A confirmation screen to stop formatting appears.
3 Select "YES" on the confirmation screen and
press the [OK] button
.
Formatting is stopped.
Note:
Formatting can be stopped if it seems to take a long time
(more than two minutes).
If for any reason formatting cannot be stopped, the
confirmation screen for stopping formatting will not appear
even if the [OPTION] button is pressed.