JVC 1010MTH-SW-MT Instructions Manual page 21

6 After setting is complete, select "ENTER", and
press the [OK] button
Doing so exits date/time setting, and returns to the initial
screen.
.
Memo:
The value for seconds cannot be set. After setting the
minute, press the [SET UP] button according to the time
signal.
To cancel date/time setting, press the [RETURN] button.
Doing so cancels date/time setting and returns to the initial
screen.
The year can be set from 2009 to 2037.
If "2037.12.31 PM11:59" is set, the time will change to
"2009.1.1 AM00:00" after one minute.
Changing the date display style
You can specify the display style of the date as follows.
1 Press the [SET UP] button on the remote control
unit
2 Select "SETUP", and press the [OK] button
The Settings menu screen appears.
.
3 Select "CLOCK SET/DISPLAY", and press the
[OK] button
The Clock Set/Display menu screen appears.
.
4 Select "DATE DISPLAY", and press the [OK]
button
The Date Display menu screen appears.
.
5 Select the date display style.
.
Select a date display style from the following items.
YEAR.MONTH.DAY : Displays the date in the year/month/
day order.
MONTH.DAY.YEAR : Displays the date in the month/day/
year order.
DAY.MONTH.YEAR : Displays the date in the day/month/
year order.
6 After selecting, press the [OK] button
The date display style will be saved.
Preparation
21