JVC KW-NT1 Instructions Manual page 75

Sound signals emitted through the rear terminals
Through the analog terminals (Speaker out/LINE OUT)
2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
• DTS sound cannot be reproduced.
Through the DIGITAL OUT terminal
Digital signals (Linear PCM, Dolby Digital, and MPEG Audio) are emitted.
• To reproduce the multi-channel sounds such as Dolby Digital and MPEG Audio, connect an amplifier or a decoder
compatible with these multi-channel sources to this terminal.
• DTS sound cannot be emitted.
<D. Audio Output>
Playback disc
DVD 48 kHz, 16/20/24 bits Linear PCM
96 kHz, Linear PCM
with Dolby Digital
with MPEG Audio
Audio CD
MP3
WAV
* Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs
are not copy-protected.
Preset equalizing values
Frequency
Sound mode
Flat
Hard Rock
R&B
Pop
Jazz
Dance
Country
Reggae
Classic
User1/2/3
<Stream>
Dolby Digital bitstream
MPEG bitstream
60 Hz 150 Hz 400 Hz
00 00
+03 +03 +01
+03 +02 +02
00 +02
+03 +02 +01
+04 +02
+02 +01
+03 00
+02 +03 +01
00 00
75
Output signals
<Dolby D>
48 kHz, 16 bits stereo Linear PCM *
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo Linear PCM
44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
44.1 kHz, 16 bits Linear PCM
1 kHz 2.5 kHz
00 00 00
00 00
00 +01
00 00 +01
+01 +01
00 –02 –01
00 00 00
00 +01 +02
00 00
00 00 00
<PCM>
48 kHz, 16 bits
stereo Linear PCM
6.3 kHz 15 kHz
00 00
+02 +01
+01 +03
+01 +02
+03 +02
+01 +01
+01 +02
+02 +03
+02 00
00 00