Setting A Destination On The Map; Setting A Destination Using The Destination Menu - JVC KW-NT1 Instructions Manual

Searching for a place
Setting a destination on the
map
1
Touch the position where you want to select
as a destination. (☞ page 19)
2
• If there are several POIs on the selected position,
select one from the list.
– The list appears only when <POI Icon> is set
to <On>. (☞ page 18)
POIs
• For details about the information screen,
☞ page 34.
• To start guidance, ☞ page 33.
• To set the selected position as via point, ☞ page 35.
• To change route options, ☞ page 33.
Setting a destination using the
Destination Menu
1
2
Home *
Goes to your home (☞ page 25)
Previous * Searches from the history of
previous destinations and via
points (☞ page 30)
Favorites * Searches from your favorite points
(☞ page 30)
Address Searches by an address
(☞ page 25)
Vicinity Searches for POIs (Point Of Interest)
around your current position, the
position selected on the map, the
destination, or the route you are
taking (☞ page 28)
POI Name Searches from the database of POI
(☞ page 29)
Phone Searches by a telephone number
(☞ page 27)
Coordinates Searches by coordinates of the
destination (☞ page 27)
Quick Search Searches for POIs of a registered
1 – 3 category (☞ pages 31 and 32)
* Selectable only when at least one place is registered.
24