Setting, Maintenance And Host Info Tabs - First Alert PRO-DC8810-520 User Manual

REMOTE Access
Remote Surveillance
SETTING
You can check and change the parameter settings as
configured in the DVR
1. BANDWIDTH: Set the bandwidth in kbps (128k, 192k,
256k, 384k, 512k, 1024k) that you want to allocate for
traffic based on internet bandwidth available. This
bandwidth does not include audio.
2. FILE SAVE PATH: The path where you want to save
captured picture and recording video.
Remote Setup - Setting Screen
HOST INFO
This interface allows you to view system information such
as HDD status, remain record time, firmware version and
MAC Address. All the information is for viewing only and
cannot be changed remotely.
Remote Setup - Host Info Screen
MAINTENANCE
You can check and change the parameter settings as
configured in the DVR along with rebooting the system and
upgrading firmware.
1. TELECONTROL: Remote reboot DVR or format HDD.
2. REMOTE UPGRADE: Remote upgrade DVR firmware.
Remote Setup - Maintenance Screen
Page 38