First Alert FA168CPS User Manual page 10

)XQFWLRQVRIWKH.H\SDGV
NOTE: The functions printed directly on the
keys indicate their
functions printed under some of the keys (shown
in brackets under the respective key), indicate
their alternate or secondary purpose.
DISPLAY WINDOW
Alpha Display Keypads:
Liquid Crystal Display (LCD) keypads that display
protection point identification, system status, and
messages.
Fixed-Word Display
protection zone ID and system status messages using
pre-designated words in the LCD display area.
Disarms burglary portion of the system,
1 OFF
silences alarms and audible trouble indicators, and
clears visual display after problem's correction.
On Voice keypads, used in conjunction
[RECORD]
with the FUNCTION and VOICE keys to record up to
a 2.5-minute message.
Arms the entire burglary system,
2 AWAY
perimeter and interior.
On Voice keypads, used in conjunction
[VOLUME]
with the FUNCTION and desired volume control keys
↑ [3] or ↓ [6] to adjust the volume of a recorded
message or voice system status.
Arms perimeter portion of burglary
3 STAY
system only. Interior protection is not armed, allowing
movement within premises without causing an alarm.
[PLAY]
On Voice keypads, used in conjunction with
the FUNCTION and VOICE keys to play the recorded
message.
[ ↑ ]
On Voice keypads, used in conjunction with the
FUNCTION and VOLUME keys to raise the message
and voice system status volume.
4 MAXIMUM Arms the entire burglary system,
perimeter and interior, but without entry delay
feature. Entering via an entry/exit door will cause an
alarm.
5 TEST
Tests the system and alarm sounder if
disarmed. Refer to Testing The System section for test
procedures.
– 10 –
primary purpose; the
2-line, 32-character
Keypads:
Display
6 BYPASS
Removes individual protection zones
from being monitored by the system.
[ ↓ ]
On Voice keypads, used in conjunction with the
FUNCTION and VOLUME keys to lower the message
and voice system status volume.
7 INSTANT
Arms in manner similar to the STAY
mode, but without the entry delay feature.
KEYS 0–9:
Used to enter your security code(s) and to
perform their associated system functions after the
security code has been entered.
✱ READY
Used to display all open protection
zones.
[STATUS]:
On Voice keypads, a momentary press of
the STATUS key annunciates the current system
status. Pressing the STATUS key a second time
annunciates and displays system and/or zone faults (if
they exist).
0
[VOICE]
On Voice keypads, enables the RECORD,
VOLUME and PLAY functions.
T
#
his key can be used for "Quick Arming"
of the system without use of a security code (if
programmed).
[FUNCTION]
On Voice keypads, enables the desired
voice or volume function.
FUNCTION KEYS:
Keys A, B, C, D may have been
programmed for a variety of functions, including panic
(emergency) functions. For details, see the Function
Keys section.
ARMED LED INDICATOR:
system has been armed.
READY LED INDICATOR:
the system is ready to be armed (no faults present).
While the system is disarmed, this indicator will go on
and off as protection zones are closed and opened.
MESSAGE LED INDICATOR:
keypads, flashes red when message waiting or lights
red (steady) when in record mode.
MIC:
On voice keypads, microphone for Message
Center recordings.
INTERNAL SPEAKER:
mimics the alarm sounder during alarms, and will
also "beep" during certain system functions. The
speaker also provides voice playback for any recorded
messages.
(RED) Lit when the
(GREEN) Lit when
(RED) On Voice
The built-in speaker