Fiio X1 Complete User's Manual page 10

b）Key-lock settings
Press OK to enter the key-lock setting submenu and choose between lockscreen modes 1,
mode 2 and mode 3. As shown by the corresponding illustration onscreen; Lockscreen mode 1
locks all keys except the power / lock button and volume buttons while the player is locked; in
Lockscreen mode 2, the power / lock button, volume buttons and OK (Pause) button are usable;
while in lockscreen mode 3, the volume keys, OK (Pause), Previous and Next buttons as well as
the power / lock button are usable.
Note: at this time, press the volume button briefly to adjust volume, while hold to change tracks.
c）Screen timeout
The player turns off the screen and locks the keys automatically after the set delay when no
buttons have been pressed and the scroll wheel hasn't been turned. The set delay can be set
between 30s, 40s, 50, 60s, 90s, 120 and never (always on)
d）Backlight brightness
Press OK to adjust the brightness (adjustable in 10 steps) using the scroll wheel and press OK
again to store the change.
e）Idle poweroff
When this is set to on, the player will turn itself off after the set time when no music is playing
and the user does not press any buttons on the player.
Idle poweroff time: When "Idle poweroff" is set to on, you may press OK to adjust the
amount of idle time detected before the player shuts off. The set time is adjustable from 1 to 8
minutes. Turn the scroll wheel to adjust the set time and press OK to store the change.
f）Sleep
When this is set to on, the player will turn itself off after the set time while music is playing.
Sleep timer: When "Sleep" is set to on, you may press OK to adjust the amount of play time
before the player shuts off. The set time is adjustable from 10 to 120 minutes. Turn the scroll
wheel to adjust the set time and press OK to store the change.
Note: Note that the sleep timer will reset to off after it is triggered once.
g）Select output
There are two output modes: lineout and headphone out, which can be switched when there is
no music playing. LO output: to connect other amplifier device.
Headphone output: to connect headphones with different impedance.
h）Theme
Press OK to enter the theme submenu and choose between different themes, and then press
OK to store the change.
i）About X1
Displays the name and model of the player, total and available capacity of TF card, total
number of files and firm-ware version. Turn the scroll wheel clockwise to read our copyright
declaration and then the quick start guide to the X1.
j）Language
Press OK and use the scroll wheel or Previous / Next buttons to choose between English,
Japanese, Korean, French, German, Spanish, traditional Chinese and Simplified Chinese. Press
OK to store change or Back to cancel. The language setting is memorized even when the
device is powered off or reset.
k）Storage formatting
Press OK to format the TF card inserted into FAT32 format; all data in the TF card will be erased
after formatting.
l）Factory restore
Resets all settings to factory defaults. Also useful for recovering from any system malfunctions.
10