Fiio X1 Quick Start Manual

Hide thumbs Also See for X1:

Table of Contents

Download this manual See also: Complete User's Manual

X1 Portable High Resolution Lossless DAP / Music Player

Quick Start Guide

A. Charge the X1

1. Charges to full in ~3 hours using DC 5V/2A adapter (recommended)

2. Charges to full in over 5 hours using computer USB port (not recommended)

B. TF / Micro SD card

1. Recommended brands: Genuine Sandisk, Transcend, Kingston—Class 6 or above

2. Maximum supported size: 128G

3. Recommend formatting card to FAT32 format or inserting card into X1 for

formatting

4. Inserting / removing TF / Micro SD card

Open rubber flap to reveal TF / micro SD card slot

ii) Insert card into slot and press into slot to install card

iii) Press card into slot again to eject card

Slot

Table of Contents

Do you have a question about the X1 and is the answer not in the manual?

Page 1: Quick Start Guide
B. TF / Micro SD card 1. Recommended brands: Genuine Sandisk, Transcend, Kingston—Class 6 or above 2. Maximum supported size: 128G 3. Recommend formatting card to FAT32 format or inserting card into X1 for formatting 4. Inserting / removing TF / Micro SD card...
Page 2 The TF / Micro SD card you now insert / have inserted into the X1 will now appear on your computer and you may copy fillies to them. Headphone out / Line out port...
Page 3 Upgrading via TF / Micro SD card: Choose a card with FAT32 file system. Unzip the firmware package from FiiO and copy the x1.fw file within to the root directory of the TF / Micro SD card. Turn off the X1 and insert the card (if not already inserted).
Page 4 Firmware updating Firmware update successful Please delete the x1.fw file from the TF / Micro SD card after the update is complete. Please update the media library again after the firmware update. Notes on usage ★The X1 will skip any songs it has trouble decoding to prevent hang-ups.
Page 5 Specifications: ●Power Supply 1700mAH polymer Li-ion battery （DC5V /2A） ●Frequency Response 20Hz~20KHz ●SNR ≥110dB ●THD <0.004% ●Output power ＞100 mW（16 Ω ） ●Battery Charging Time 2A adaptor: About 3.5 hrs（when off）; ●Suggested Headphone 16~300Ω Impedance ●Memory Supports external TF card with 128G at its max if system format permits ●Dimensions 96.7mm×57.7mm×14.1mm...