Before Changing - Mercedes-Benz GL Operator's Manual

Fuses
334
! Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Otherwise, components or
systems could be damaged.
Before changing a fuse
X
Park the vehicle and apply the parking
brake.
X
Switch off all electrical consumers.
X
Remove the SmartKey from the ignition
lock.
The fuses are located in various fuse boxes:
fuse box on the front-passenger side of the
R
dashboard
fuse box in the engine compartment on the
R
right-hand side of the vehicle, when viewed
in the direction of travel
fuse box in the cargo compartment on the
R
right-hand side of the vehicle, when viewed
in the direction of travel
The fuse allocation chart is located in the
vehicle tool kit (
compartment under the trunk floor.
Dashboard fuse box
! Do not use a pointed object such as a
screwdriver to open the cover in the
dashboard. You could damage the
dashboard or the cover.
Y page 314) in the stowage
X
To open: pull cover : outwards in the
direction of the arrow and remove it.
X
To close: clip in cover : at the front of the
dashboard.
X
Fold cover : inwards until it engages.
Fuse box in the engine compartment
X
Open the hood (
Illustrated: GL 450 (GL 350 BlueTEC, GL 550 are
similar)
X
Remove any existing moisture from the
fuse box using a dry cloth.
X
To open: open clamps ;.
X
Fold up cover : and remove it towards the
front of the vehicle.
! Make sure that no moisture can enter the
fuse box when the cover is open.
X
To close: check whether the seal is lying
correctly in cover :.
X
Insert cover : into the retainer at the rear
of the fuse box.
X
Fold down cover : and close clamps ;.
! The cover must be positioned properly.
Moisture or dirt could otherwise impair the
operation of the fuses.
X
Close the hood (
Fuse box in the cargo compartment
X
Open the tailgate.
I n f o r m a t i o n P r o v i d e d b y :
Y page 300).
Y
page 301).