Settings - Mercedes-Benz GL Operator's Manual

Example display for vehicles with the Off-Road Pro
engineering package
Settings menu
Introduction

Settings

The menu can be used for:
restoring the factory settings
R
changing the instrument cluster settings
R
changing the time/date settings
R
changing the light settings
R
changing the vehicle settings
R
changing the convenience settings
R
Resetting to factory settings
For safety reasons, the
Lamps
function in the
only reset when the engine is switched off.
X
Press V or U on the steering wheel
Settings
to select the
X
Press and hold the . reset button on the
instrument cluster for approximately three
seconds.
A prompt appears in the multifunction
display asking you to confirm by pressing
the . reset button again.
27 This function is not available in vehicles with the navigation module.
27
Daytime Running
Lighting
submenu is
menu.
I n f o r m a t i o n P r o v i d e d b y :
Menus and submenus
X
Press the . reset button again.
The settings of most functions are restored
to the factory settings.
or
X
If you want to retain the settings, do not
press the . reset button a second time.
After approximately five seconds, the
Settings
menu reappears.
X
Press the V or U button to select a
different menu.
Instrument cluster
Selecting the unit of measurement for
distance
This function is only available in Canada.
Display unit Speedometer/
The
Odometer
function allows you to choose
whether certain displays appear in kilometers
or miles.
The selected unit of measurement for
distance applies to:
the analog speedometer
R
the odometer and the trip odometer
R
the trip computer
R
the navigation instruction in the
R
Navigation menu
DISTRONIC
R
X
Press the V or U button on the
steering wheel to select the
menu.
X
Press the & button to call up the
selection of submenus.
X
Press the W or X button to select the
Instrument Cluster
X
Press the & button to select
Unit Speedometer/Odometer.
X
Press the W or X button to select
km Miles
or as the unit of measurement for
distance.
X
Press the &, V or U button to
select a different display.
Settings
submenu.
Display
Z
223