Mercedes-Benz GL Operator's Manual page 278

Stowage areas
276
Loading rails
:
Inserting the mounting elements into
the loading rail
You can slide mounting element ; in loading
rail : to various detents and secure it. These
detents are marked and positioned at 5-cm
intervals along loading rail :.
You can turn mounting element ; of loading
rail : to four positions:
& To lock the mounting element
= To release the cargo tie-down ring, the
inertia reel or the telescopic rod
; To remove the mounting element
B To push the mounting element to the
next detent
X
Turn mounting element ; to ;.
X
Insert mounting element ; into loading
rail :.
X
Turn mounting element ; to & until
you feel it clearly engage in loading rail :.
Inserting the cargo tie down rings into
the mounting
G
WARNING
Distribute the load on the cargo tie down rings
evenly. Please observe the loading guidelines.
X
Turn mounting element ; in the loading
rail to =.
X
Insert cargo tie-down ring : into mounting
element ;.
X
Turn mounting element ; to & until
you feel it clearly engage in the loading rail.
Seat belt retractor
The inertia reel can be used to secure light
loads against the side wall of the cargo
compartment to prevent them from moving
around.
X
Insert two mounting elements ; into a
loading rail.
X
Turn mounting elements ; in the loading
rail to =.
I n f o r m a t i o n P r o v i d e d b y :