Keyless-Go - Mercedes-Benz GL Operator's Manual

Display messages
256
Display messages
No Service
~
Bluetooth ready
¥
Top Up Washer Fluid
SmartKey
Display messages
+
Key Does Not
Belong to Vehicle
+
Remove Key
+
You need a new key.
+
Change Key
Batteries
+
Don't Forget Your
Key
Possible causes/consequences and M Solutions
Your vehicle is outside the network provider's transmitter/
receiver range.
X
Wait until the mobile phone operational readiness symbol
appears in the multifunction display.
®
The Bluetooth connection between your mobile phone and
COMAND is not activated.
X
If desired, activate the Bluetooth
mobile phone and COMAND (see the separate Operator's
Manual).
The washer fluid level has dropped to approximately ⅓ of the total
reservoir capacity.
X
Add washer fluid ( Y
Possible causes/consequences and M Solutions
You have put the wrong SmartKey in the ignition lock.
X
Use the correct SmartKey.
The SmartKey is in the ignition lock.
X
Remove the SmartKey.
The SmartKey needs to be replaced.
X
Visit a qualified specialist workshop.
The batteries of the KEYLESS-GO key are discharged.
X
Change the batteries (
The display message is shown for a maximum of 60 seconds and
is only a reminder.
You have opened the driver's door with the engine switched off.
The KEYLESS-GO key is not in the ignition lock.
X
Remember to take the KEYLESS-GO key with you when you
leave the vehicle.
I n f o r m a t i o n P r o v i d e d b y :
®
connection between your
page 303).
Y page 80).