Mercedes-Benz GL Operator's Manual page 105

Outer seat head restraints in the second row of
seats
Outer seat head restraints in the third row of seats
X
Using both hands, reach backwards and
grasp the sides of the head restraint.
X
Pull the lower edge of the head restraint
forwards or backwards until it is in the
desired position.
Removing and installing rear head
restraints
G
WARNING
Occupants should only travel sitting on seats
which have the head restraints installed. In
the event of an accident, this reduces the risk
of injury for passengers seated in the rear
compartment.
Second row of seats: if you wish to remove/
install the outer seat head restraints, you
must fold the respective seat backrest
forwards ( Y page 104).
Third row of seats: if you wish to remove/
install the head restraints, you must fold the
respective seat backrest forwards
( Y page 104).
Outer seat head restraints in the second row of
seats
Outer seat head restraints in the third row of seats
X
To remove: pull the head restraint up to
the stop.
X
Press release catch : and pull the head
restraint out of the guides.
X
Second row of seats: fold back the seat
backrest until it engages.
Third row of seats: fold the seat up or down
( Y page 104).
X
To re-install: insert the head restraint so
that the notches on the bar are on the left
when viewed in the direction of travel.
X
Push the head restraint down until you hear
it engage in position.
X
Second row of seats: fold back the seat
backrest until it engages.
Third row of seats: fold the seat up or down
( Y page 104).
I n f o r m a t i o n P r o v i d e d b y :
Seats
103
Z