FoodSaver V2222 User Manual page 14

Trouble-Shooting
Problem
Nothing happens
when Latch is closed
and Button is pressed
Cannot insert bag
into machine
Air was removed from
the bag, but now air
has re-entered
Bag melts
If you need further
assistance:
13
EN-
cont.
Solution
• Make sure unit is plugged in.
• Make sure wall outlet is functional.
• Open Latch, make sure lid is all the way down, re-latch lid.
• Make sure there is enough bag material to reach center of drip tray. Always
allow three inches (7.62 cm) extra space to allow the bag to seal tightly
around food contents.
• Gently stretch bag flat while inserting. Insert bag CURL DOWN into Vacuum
Channel.
• Examine the seal. A wrinkle along the seal may cause air to re-enter the bag.
To prevent wrinkles in the seal, gently stretch bag flat while inserting bag into
Vacuum Channel.
• Sometimes moisture or food material (such as juices, grease, crumbs, pow-
ders, etc.) along seal prevents bag from sealing properly. Cut bag open, wipe
top inside of bag and reseal.
• Sharp food items may have punctured bag. Use a new bag if there is a hole.
Cover sharp food items with a soft cushioning material, such as a paper towel,
and reseal.
• Fermentation or the release of natural gases from inside the foods may have
occurred. When this happens, food may have begun to spoil and should be
discarded.
• Sealing Strip may have become too hot. Always wait at least 20 seconds for
appliance to cool down before you vacuum package another item.
• Use FoodSaver brand bags. Our FoodSaver
designed for FoodSaver
• Call Consumer Services at 1-877-777-8042.
• For additional tips and answers to frequently asked questions,
go to www.foodsaver.com/Support.aspx
www.foodsaver.com 1-877-804-5383
Bags and Rolls are specially
®
units.
®