Lotus 2004 ELISE Service Notes page 208

Lotus Service Notes
Outer
column
assembly
3. Inner Column Upper
With the steering wheel removed, measure the length of the exposed part of the upper column as
shown:
Specification = 76 ± 1mm
Inner column
upper end
4. 'Break out' Inserts
Remove the column shrouds and the
column flange fixing bolts, and check
that each of the alloy 'break out' inserts
is securely attached to the column
flange. If the plastic pins are sheared,
the column assembly must be replaced.
80 ± 1 mm
76 ± 1 mm
Section HG
58 ± 1 mm
Page 7
Inner
column
lower end
h52
h52a
Alloy 'break
out' insert
Nylon
shear
pins
h48