Table of Contents
Advertisement
Installation
INSTALLATION
Location
When selecting a position for your dishwasher you
should make sure the installation surface is flat
and firm, and the room is well ventilated. Avoid
locating your dishwasher near a heat source, e.g.
cooker, boiler or radiator. Extreme cold ambient
temperatures may also cause the appliance not to
perform properly. This dishwasher is not designed
for use in a garage or outdoor installation.
Do not drape the dishwasher with any covering.
When installing, ensure that free space is left at the
sides.
All parts removed must be saved to do
the reinstallation in the future. Ensure
the dishwasher is unplugged and empty.
We recommend that 2 people handle the
dishwasher during installation.
1. Please ensure the dishwasher is installed by a
qualified technician. Refer to the tools required.
The supplied door template also contains
installation steps which will assist
installation.
2. Ensure there is clearance each side of the unit
to allow slight sideways movement for servicing
when required. Good levelling is essential for
correct closure and sealing of the door. When
the unit is correctly levelled, the door should
not catch the inner liner on either side of the
cabinet. The adjustable feet may be loosened
or tightened in order to obtain the optimum
levelling of the unit.
GB-6
CID45B10_IB_110426.indd 6
screw
cone
gear
level
level
level
level
level
4/26/11 8:15 PM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CID45B10 and is the answer not in the manual?