Installation; Location - Currys Essentials CDWTT13 Instruction Manual

Installation

INSTALLATION

Location

When selecting a position for your freestanding
dishwasher you should make sure the installation
surface is flat and firm, and the room is well
ventilated. Avoid locating your dishwasher near a
heat source, eg. cooker, boiler or radiator. Extreme
cold ambient temperatures may also cause the
appliance not to perform properly. This dishwasher
is not designed for use in a garage or outdoors.
Do not cover the dishwasher. When installing,
ensure that free space is left at the sides.
All parts removed must be saved to do the
reinstallation in the future. Ensure the dishwasher
is unplugged and empty. We recommend that 2
people handle the dishwasher during installation.
1. Please ensure the dishwasher is installed by a
qualified technician. Refer to the tools required.
2. Ensure there is sufficient clearance on each side
of the unit to allow slight sideways movement
for servicing when required. Good levelling is
essential for correct closure and sealing of the
door. When the unit is correctly levelled, the
door should not catch the inner liner on either
side of the cabinet.
The dimensions of the dishwasher are 550(W) x
500(D) X 438(H) in mm. The figure outlines the
minimum dimensions required to accommodate
the table top dishwasher. Protect plastic parts
and cables from high temperatures.
50mm
or
150mm or more
more
500mm
unit in mm
50mm or more
438mm
150mm or more
9