Advertisement
2002 Mustang Workshop Manual
Installation
1. Install the intake manifold and gaskets, tighten the bolts in the sequence shown.
2. NOTE: The O-ring is to be installed on the top of the thermostat.
Install the water thermostat and the O-ring.
Install a new O-ring as necessary.
3. Install the water outlet adapter.
4. Connect the water temperature indicator sender.
5. Position the engine harness and attach to the intake manifold in two locations.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS2B/~MUS~LEN/19/S...
Page 8 of 14
7/15/2010
Advertisement
