Advertisement
2002 Mustang Workshop Manual
36. Separate the engine harness and position it out of the way.
37. Disconnect the water temperature indicator sender.
38. Remove the water outlet connector.
39. Remove the water thermostat and the O-ring.
Inspect the O-ring and discard if necessary.
40. NOTE: The gaskets are reusable if not damaged.
Remove the bolts in the sequence shown, remove the intake manifold and gaskets.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS2B/~MUS~LEN/19/S...
Page 7 of 14
7/15/2010
Advertisement
