Table of Contents
Advertisement
Finder
This product comes equipped with a standard finder (0.5x). The finder is
replaceable; if you replace it with an optional finder unit, you can change
the finder magnification to match your shooting conditions.
Replacing the finder
1
Rotate the finder unit mounted on
the rear case in a counterclockwise
direction to remove it
=The screw areas are coated in grease,
so be careful not to touch them.
2
Rotate the replacement finder unit
in a clockwise direction to attach it
CAUTION
=Before attaching the finder, check to make sure that there is no dust,
dirt, or debris inside it.
=When replacing the finder, do not touch the surface of the finder lens.
Identification of Parts
E-8
Advertisement
Table of Contents
