Opening And Closing The Housing - Sea & Sea RDX-D60 Instruction Manual

Opening and Closing the Housing

Opening and closing the housing is done with the buckles. Here we will
explain how to open and close the buckles.
Opening the buckle
1
Press and hold the buckle lock lever
(‡@), and remove the right and left
buckles simultaneously (‡A)
CAUTION
=When removing the buckle,be sure to use
the tips of your fingers, not your fingernails.
2
Remove the L-hook from the front case
Closing the buckle
1
Attach the L-hook to the front case
2
Attach the buckles to the rear
case (‡@ ), and close the right and
left buckles simultaneously (‡A )
CAUTION
=Before aligning the rear case and front case, make sure there are no
specks of dust, scratches, or deformities on the O-ring and the O-ring
contact surfaces.
=Check to make sure that the locking latches are securely locked.
E-9
Buckle lock lever
L-hook