Mounting the Camera in the Housing
CAUTION
=Before mounting the camera in the
housing, make sure the O-ring is not
sticking out of its groove.
=Make sure to remove the eyecup
from the camera. If used with the
eyecup in place, it could cause
flooding.
When using the fiber-optic cable (option)
1
Release the lock on the camera
tray by pushing the knob in the
direction of the arrow (‡@), and
slide the camera tray out (‡A)
2
Attach the camera tray to the
c a m e r a ' s t r i p o d s o c k e t b y
f a s t e n i n g t h e f i x i n g s c r e w
using the supplied attachment
tool
3
Attach the lens to the camera
Knob
Attachment tool
Fixing screw
E-12