Yamaha YZF-R1 Service Manual page 70

x Map select switches Map 1 and Map 2 of the YMS "Comp. FUEL."
NOTICE
When switching to Map 1 or Map 2 using "Map Select" while riding, check that proper
riding is possible even when using either map.
x The switches (2 types) supplied in this set enable the map select and pit road limiter to be
used. (See diagram 1.) The switch accompanying the assembly, functions as the main
switch.
(Diagram 1)
Main switch
Map select
1 o Map 1
2 o Map 2
Pit road
limiter
x Use the 3-prong coupler in front with the red wire attached as the main switch. (See
diagram 2.)
Fitting it turns the power on and removing it turns the power off.
NOTICE
Be careful not to pull the wire too strongly.
(Digram 2)
– 66 –
Engine stop
switch
Starter
switch
Main switch