Yamaha YZF-R1 Service Manual page 69

Installing Rectifier/Regulator:
1. Remove from the chassis the STD rectifier/regulator that is installed on the right side of the
radiator.
2. Install the rectifier/regulator to the catcher tank from the kit using the STD chassis bolts.
3. In case the oil catcher tank is not used from the kit, install the rectifier/regulator using the
supplied bracket , grommet , spacer , and bolt . 6
In case the oil catcher tank is used.
Rectifier/Regulator
(STD)
In case the oil catcher tank is not used.
7
8
9
(STD)
Rectifier/Regulator
8 9
Oil catcher tank
7
6
– 65 –