Table of Contents
Advertisement
About this guide
Audience
This user guide is intended for system integrators, and experienced users with at least basic
knowledge of configuring a server.
Contents
This guide contains the following parts:
1.
Chapter 1: Product Introduction
This chapter describes the general features of the server, including sections on front
panel and rear panel specifications.
2.
Chapter 2: Hardware setup
This chapter lists the hardware setup procedures that you have to perform when
installing or removing system components.
3.
Chapter 3: Motherboard information
This chapter includes the motherboard layout and brief descriptions of the jumpers and
internal connectors.
4.
Chapter 4: BIOS information
This chapter tells how to change system settings through the BIOS Setup menus and
describes the BIOS parameters.
5.
Chapter 5: RAID configuration
This chapter provides instructions for setting up, creating and configuring RAID sets
using the available utilities.
6
Chapter 6: Driver installation
This chapter provides instructions for installing the necessary drivers for different
system components.
x
Advertisement
Table of Contents
