Audiovox Duo Installation Manual & User Manual page 16

16
below is required. NOTE:
1 Disconnect main radio
harness and locate SAT
connector. Remove it
from main harness by
pressing on the release
tab of the SAT connector.
SAT
Connector
2
Slide out the inner part of
the SAT connector from
plastic housing.
3 Disassemble the A-DUO-
101-AVW R2 connector the
same way as the factory
SAT connector.
Remove the SAT wires from
4
the factory connector
releasing the pins with a small
screw driver or ball point pen.
pins 1,3, 7
5 Relocate wires to A-DUO-
101-AVW R2 connector
keeping the same order and
location.
pins 1,3, 7
Put plastic connector covers
6
by back on. Insert A-DUO-101-
AVW R2 connector to factory
VW main harness.
A-DUO-101-
AVW R2
connector
7 Connect ground wire to
chassis of radio.