Table of Contents
Advertisement
JDDRII_OV>2.3V: Header for Memory Voltage Overclocking
When processing Memory Voltage Overclocking, please place the jumper to
pin1-2 Closed. The Default setting is Pin 2-3 Closed.
Note:
1.
When "JDDRII_OV>2.3V" jumper cap is placed on Pin 1-2, memory
voltage can be manually adjusted under CMOS setup.
2.
When "JDDRII_OV>2.3V" jumper cap is placed on Pin 2-3, memory
voltage will be fixed at 2.3V, and can't be adjusted under COMS setup.
Before setting memory voltage overclocking, please ensure that your DDR
supports up to 2.3V. (Consult your DDR2 supplier to make sure)
On-Board LED Indicators
There are 2 LED indicators on the motherboard to show system status.
LED_DIMM:
This LED indicates the voltage of memory is activated normally.
LED_5SB:
This LED indicates the system is ready for Power-on.
TForce 590 SLI Deluxe
1
3
1
3
Pin 1-2 Close:
Normal status (default).
1
3
Pin 2-3 Close:
Memory voltage Overclocking.
19
Advertisement
Table of Contents
