Operating and Installation Instructions Internal/External Blower DRIB XL, DRIB XXL DREB XL, DREB XXL en - US, CA To prevent accidents and appliance damage, read these instructions before installation or use. M.-Nr. 09 824 330...
Installation ............7 Installation DRIB XL/XXL into the range hood ......9 Installation DREB XL/XXL on an external wall .
However, under certain conditions installation in these applications may be possible. Please contact your Miele dealer or the Miele Technical Service Department with specific requirements.
IMPORTANT SAFETY INSTRUCTIONS Installation d) Before connecting the appliance to the power supply make sure that the ,WARNING voltage and frequency listed on the data plate correspond with the TO REDUCE THE RISK OF household electrical supply. FIRE, ELECTRIC SHOCK, OR This data must correspond to prevent INJURY TO PERSONS, appliance damage.
Functional description Internal blower DRIB External blower DREB The internal blower DRIB XL should The external blower DREB XL should only be used in combination with Miele only be used in combination with Miele Range Hoods DAR 1120, 1130 or Range Hoods DAR 1120, 1130 or DAR 1220, 1230.
Appliance dimensions a Exhaust air connection b Connecting cable to the range hood. If necessary, use the 10 ft. (3 m) extension cord supplied.
Installation a Air extraction with internal blower DRIB XL or XXL. b Recirculation with internal blower DRIB XL and conversion kit DRUU. c Air extraction with external blower DREB XL or XXL.
Installation ^ Feed the exhaust duct c through the Installation DRIB XL/XXL into wall and secure it to the motor unit the range hood fixing bracket with a hose clip. ^ Please refer to the operating and ^ Apply a sealant along the outside...
Air extraction Exhaust ducting and connections WARNING – The ducting should be as short and straight as possible, and the number Danger of toxic fumes. of sharp bends should be minimized. – For most efficient air extraction, the Gas cooking appliances release diameter of the ductwork should not carbon monoxide that can be be less than 8"...
^ Connect the blower to the cooker The blowers DRIB/DREB XL may hood using the connecting cable and only be operated with Miele the 6-pole plug connector. DAR 1120, 1130, or DAR 1220, 1230 Range hoods. ^ Use the extension cable supplied to The blowers DRIB/DREB XXL may lengthen the cabling if necessary.
After Sales Service Repairs In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department. ^ When contacting the Technical Service Department, please have the model and serial number of your appliance available.
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing Old appliances may contain materials materials protect the appliance during that can be recycled. Please contact shipping. They have been designed to your local recycling center about the be biodegradable and recyclable.
Alteration rights reserved / 4613 M.-Nr. 09 824 330 / 00 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.