Use this appliance only in the manner intended by the manufacturer. Read these Instructions carefully If you have questions, contact Miele. before installing or using the b) Before servicing or cleaning the Ventilation System. appliance, switch power off at the...
IMPORTANT SAFETY INSTRUCTIONS Installation d) Before connecting the appliance to the power supply make sure that the ,WARNING voltage and frequency listed on the data plate correspond with the TO REDUCE THE RISK OF household electrical supply. FIRE, ELECTRIC SHOCK, OR This data must correspond to prevent INJURY TO PERSONS, appliance damage.
Functional description The external blower should only be used in combination with Miele ventilation systems DA 6480 or DA 6490. It must be mounted outside the kitchen on an external wall or on the roof. The external blower is connected to the ventilation system by an exhaust duct and power cord.
Installation Example: Installation on an external wall Example: Installation on a roof The exhaust connection can be connected to either the front or back of the downdraft. For more information see the installation diagram for the downdraft.
Installation ^ Mount the external blower on the Preparation external wall using four suitable ^ Remove all packaging. screws. ^ Unscrew and remove the six screws ^ Seal the screw heads. on the blower cover. ^ Unscrew the two screws on the Installation on a roof terminal box and remove the cover.
Installation ^ The external blower and the ventilation system are connected by a 10" (254 mm) exhaust duct C (see "Air extraction"). Mount the provided connection plate on the ventilation system (see installation instructions DA 6480, 6490). ^ Install a UL/CSA-approved power cord (see "Electrical connection").
Air extraction Exhaust ducting and connections WARNING – The ducting should be as short and straight as possible, and the number Danger of toxic fumes. of sharp bends should be minimized. Gas cooking appliances release – For most efficient air extraction, the carbon monoxide that can be diameter of the ductwork should not be less than 10"...
Wire sizes must conform to the requirements of the National This external blower may only be Electrical Code ANSI/NFPA 70 — operated with Miele DA 6480 or latest edition or Canadian Electrical DA 6490 ventilation systems. Code, C22.1 and C22.2 No.
Electrical connection Important Maximum load ....210 W The ventilation system must be hard Voltage ..... 120 V wired as follows: Frequency .
After Sales Service Repairs In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department. ^ When contacting the Technical Service Department, please have the model and serial number of your appliance available.
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing Old appliances may contain materials materials protect the appliance during that can be recycled. Please contact shipping. They have been designed to your local recycling center about the be biodegradable and recyclable.
Alteration rights reserved / 1711 M.-Nr. 07 915 550 / 02 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.