Changing A Fuse; Installing Electrical Accessories - CITROEN DS3 Owner's Handbook Manual

Changing a fuse

Access to the tools
The extraction pliers and the spare fuse
storage locations are fitted to the back of the
dashboard fuse box cover.
For access to them:
unclip the cover by pulling on the side,
remove the cover completely,
remove the pliers.
Changing a fuse
Correct Incorrect
Before changing a fuse, the cause of the failure
must be identified and rectified.
Identify the faulty fuse by checking the
condition of its filament.
Use the special pliers to extract the fuse
from its housing.
Always replace the faulty fuse with a fuse
of the same rating.
Check the correspondence between the
number etched on the box, the rating
etched on the fuse and the tables below.
Installing electrical
accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a CITROËN dealer.
CITROËN will not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying malfunctions
resulting from the installation of
accessories not supplied and not
recommended by CITROËN and
not installed in accordance with its
instructions, in particular when the
combined consumption of all of the
additional equipment connected
exceeds 10 milliamperes.