Page 2
If the heading "MyCitroën" is not available on the public website for Select: your country, you can fi nd your handbook at the following address: the link in "Private customer access", http://service.citroen.com the language, the model, the edition date appropriate for the date of registration of your vehicle.
Page 3
We draw your attention to the following... Your vehicle is fitted with only some of CITROËN has a presence on every continent, the equipment described in this document, a complete product range, depending on the trim level, version and the bringing together technology and a permanent spirit of innovation, specifications for the country in which it is sold.
Contents Contents FAMILIARISATION safety warning ALPHABETICAL additional information INDEX contributes to the protection of the environment programming a function with the VISUAL SEARCH configuration menu refer to the page indicated...
MONITORING ACCESS COMFORT DRIVING Instrument panel Electronic key - remote Front seats 100 Starting-switching off the control engine Indicator and warning lamps Rear seats 103 Electric parking brake Boot Gauges and indicators Mirrors 111 Hill start assist Alarm Adjustment buttons Steering wheel adjustment 112 Manual gearbox Electric windows...
Page 6
VISIBILITY CHILD SAFETY SAFETY PRACTICAL INFORMATION 138 Lighting controls 158 Child seats 170 Direction indicators 186 Temporary puncture repair kit 141 Daytime running lamps 164 ISOFIX child seats 171 Emergency or assistance call 192 Changing a wheel 142 Automatic illumination of 167 Child lock 171 Horn 199 Changing a bulb...
Page 7
CHECKS TECHNICAL DATA AUDIO AND TELEMATICS 225 Opening the bonnet 238 Petrol engines 248 Emergency or assistance 226 Petrol engines 239 Petrol weights 251 eMyWay 227 Diesel engines 241 Diesel engines 305 Audio system 228 Running out of fuel (Diesel) 242 Diesel weights 229 Checking levels 244 Dimensions...
Exterior Stop & Start This system puts the engine temporarily into standby during stops in the traffic (red lights, traffic jams, etc...). The engine restarts automatically as soon as you want to move off. The Stop & Start system reduces fuel consumption and exhaust emissions, and offers the comfort of complete silence when stationary.
Familiarisation Exterior Reversing camera This system, available only with satellite navigation, is activated automatically on Automatic headlamp dipping engaging reverse gear and provides an image This system automatically changes between in the colour screen. dipped and main beam, depending on the driving conditions, using a camera located in the interior rear view mirror.
Access Keyless Entry and Starting Fuel tank Electronic key Unlocking Opening the fuel filler flap. Tank capacity: approximately 60 litres. With the electronic key on your person and in the defined zone A around the vehicle, pass your hand behind the door handle to unlock the vehicle, then pull on the handle to open the door.
Familiarisation Interior Audio and communication systems These systems benefit from the latest Head-up display technology: MP3 compatible audio systems, This system projects speed and cruise control/ USB player, Bluetooth hands-free system, speed limiter information onto a smoked strip in satellite navigation system with colour screen, the driver's field of vision, so that they do not need auxiliary inputs, Hi-Fi audio system, ...
Page 14
Switch panels Illumination of the warning lamp indicates the state of the corresponding function. Deactivation of parking sensors. Activation of lane departure warning. Push button starting/stopping. Deactivation of the DSC system. Deactivation of the alarm. Locking/unlocking the passenger compartment. Deactivation of Stop & Start. Opening the fuel filler flap.
Instruments and controls Bonnet release lever. 14. Controls for electric windows / electric child 27. Driver's airbag. 2. Headlamp height adjustment. lock / central locking. Horn. 3. Side adjustable air vents. 15. eMyWay controls. 28. Cruise control / speed limiter controls. 4.
Sitting comfortably Head restraint adjustment Steering wheel adjustment Heated seats control To lower it, simultaneously press button A and Release the adjustment mechanism. 0 : off. push down on the head restraint. 2. Adjust for height and reach. 1: low. To raise it, guide the head restraint upwards to 3.
Familiarisation Sitting comfortably Door mirrors Rear view mirror Front seat belts Adjustment Automatic detection of day/night mode. Selection of the left or right mirror. 2. Rear view mirror adjustment. 2. Adjusting the position of the mirror glass. 3. De-selection of the mirror. 4.
Seeing clearly Lighting Wipers Switching on "AUTO" mode Ring A Control stalk A: windscreen wipers Briefly push the stalk downwards. Lighting off. 2. Fast wipe. Switching off "AUTO" mode Automatic illumination of headlamps. Normal wipe. Int. Intermittent wipe. Briefly push the stalk downwards or place Sidelamps.
Familiarisation Monitoring Instrument panel Warning lamps On switching on, the dial needles go to the C. With the ignition on, the instrument panel With the ignition on, the orange and red extent of their travel then return to 0. screen should indicate the oil level. warning lamps come on.
Passenger safety Front passenger's airbag Front seat belts and passenger's front airbag A. Left hand front seat belt not fastened or E. Left hand rear seat belt not fastened or unfastened warning lamp. unfastened warning lamp. B. Right hand front seat belt not fastened or Front passenger's airbag deactivated unfastened warning lamp.
Familiarisation Driving safely Electric parking brake Before leaving the vehicle, check that the the brake warning lamp and the P warning lamp in the control lever A are on fixed (not flashing). If towing a trailer or caravan or if the slope might vary (transport by boat or lorry, recovery of the vehicle...) make a maximum application of the parking...
Driving safely Starting - stopping the engine Before starting Starting at temperatures above Starting at temperatures below zero zero Place the gear lever in neutral or in position N for the electronic gearbox Press the brake pedal. You must initiate preheating of the Diesel system or automatic gearbox.
Familiarisation Driving safely Speed limiter "LIMIT" Cruise control "CRUISE" Display in the instrument panel The cruise control or speed limiter mode appears in the instrument panel when it is selected. Gear shift indicator Selecting speed limiter mode. Selecting cruise control mode. 2.
Page 26
Driving safely Stop & Start Going into engine STOP mode Going into engine START mode Deactivation / Reactivation The "ECO" warning lamp comes The "ECO" warning lamp goes off on in the instrument panel and the and the engine restarts with the engine goes into standby;...
Page 27
Familiarisation Eco-driving Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO emissions. Optimise the use of Control the use of your electrical equipment your gearbox Before moving off, if the passenger Avoid running the engine before moving off, With a manual gearbox, move off gently, compartment is too warm, ventilate it by...
Page 28
Limit the causes of excess Observe the recommendations consumption on maintenance Spread loads throughout the vehicle; place Check the tyre pressures regularly, when cold, When refuelling, do not continue after the 3 the heaviest items in the bottom of the boot, referring to the label in the door aperture, cut-off of the nozzle to avoid any overflow.
Petrol-Diesel instrument panel Dials and screens Control buttons Rev counter (x 1 000 rpm or tr/min), 6. Gear shift indicator for a manual gearbox A. Main lighting and controls dimmer. graduation according to engine (petrol or or gear lever position and gear for an B.
Monitoring Indicator and warning lamps Visual indicators informing the driver that a When the engine is started, these same Certain warning lamps may come on in system is in operation, switched off or has a warning lamps should go off. one of two modes: fixed (continuous) or fault.
Page 34
Operation indicator lamps If one of the following indicator lamps comes on in the instrument panel and/or instrument panel screen, this confirms that the corresponding system has come into operation. Warning / indicator lamp State Cause Action / Observations Left-hand flashing with buzzer.
Page 35
Monitoring Warning / indicator lamp State Cause Action / Observations Rear foglamps fixed. The rear foglamps are switched on. Turn the ring on the stalk rearwards to switch off the rear foglamps. Diesel engine fixed. The START/STOP switch has been Wait until the warning lamp goes off before starting.
Page 36
Warning / indicator lamp State Cause Action / Observations Automatic fixed. The wiper control is pushed Automatic front wiping is activated. wiping downwards. To deactivate automatic wiping, operate the control stalk downwards or put the stalk into another position. Passenger's fixed in the seat belt The control switch, located in the glove Move the control switch to the "OFF"...
Page 37
Monitoring Deactivation indicator lamps If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally. This is may be accompanied by an audible signal and a message in the instrument panel screen. Warning / indicator lamp State Cause...
Page 38
When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on the part of the driver. Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in the instrument panel screen. If you encounter any problems, contact a CITROËN dealer or a qualified workshop.
Page 39
Monitoring Warning / indicator lamp State Cause Action / Observations Electric parking flashing. The electric parking brake is not You must stop as soon as it is safe to do so. brake applied automatically. Park on flat level ground, switch off the ignition and The application/release is faulty.
Page 40
Warning / indicator lamp State Cause Action / Observations Anti-lock fixed. The anti-lock braking system has a The vehicle retains conventional braking. Braking System fault. Drive carefully at reduced speed and contact a (ABS) CITROËN dealer or a qualified workshop without delay.
Page 41
Monitoring Warning / indicator lamp State Cause Action / Observations Seat belt(s) fixed A seat belt has not been fastened or Pull the strap then insert the tongue in the buckle. not fastened / or flashing has been unfastened. unfastened accompanied by an audible signal.
Coolant temperature gauge After driving for a few minutes, the temperature and pressure in the cooling system increase. To top up the level: wait for the engine to cool, unscrew the cap by two turns to allow the pressure to drop, when the pressure has dropped, remove the cap, top up the level to the "MAX"...
Monitoring Service indicator More than 1 800 miles (3 000 km) Less than 600 miles (1 000 km) System which informs the driver when the remain before the next service is due remain before the next service is due next service is due, in accordance with the manufacturer's servicing schedule.
Page 44
Service overdue Service indicator zero reset Retrieving the service information For 5 seconds after the ignition is switched on, the spanner flashes to indicate that the service You can access the service information at any must be carried out as soon as possible. time.
Monitoring Engine oil level indicator System which informs the driver whether the engine oil level is correct or not. This information is indicated for a few seconds when the ignition is switched on, after the service information. Oil level correct Oil level indicator fault The level read will only be correct if This is indicated by a message in the...
Total distance recorder Trip distance recorder Lighting dimmer System which measures the total distance System which measures a distance travelled System for manual adjustment of the brightness travelled by the vehicle during its life. during a day or other period since it was reset of the instruments and controls in relation to the The total and trip distances are displayed for to zero by the driver.
Page 47
Monitoring Black panel (black screen) with eMyWay System allowing certain screens to be switched off for night driving (available only with For more information, refer to the eMyWay). eMyWay part of the "Audio and The instrument panel remains on with the telematics"...
Setting the date and time Audio system / Bluetooth Using the arrows, select "Display configuration" and confirm. Using the arrows, select "Date and time adjustment" and confirm. The analogue clock does not have an Press MENU. adjustment button. To set the time, refer to the section relating to the screen (audio system) configuration menu.
Page 49
Monitoring eMyWay The clock, located in the dashboard, is synchronised with the time in the screen. It is set once the time is adjusted using the " SETUP " menu and every time the ignition is switched on. Select "Display configuration " and confirm. Select "...
Trip computer Instrument panel screen Trip reset The current information tab with: ● the range, ● the current fuel consumption, ● the Stop & Start time counter. Information display Trip "1" with: ● the average speed, for the first trip. ●...
Monitoring Trip computer, a few definitions… Range Current fuel consumption Average speed (miles or km) (mpg or l/100 km or km/l) (mph or km/h) This indicates the distance This is the average fuel consumption This is the average speed calculated during the last few seconds.
Electronic key remote control Unlocking the boot Selective unlocking This setting is done in the Press this button until you hear configuration menu. the boot unlock. The vehicle is Complete unlocking is activated by completely unlocked. default. Locking the vehicle To unlock only the driver's door, press the open padlock once.
Page 55
Access "Keyless Entry and Starting" system Unlocking the vehicle Selective unlocking Complete unlocking This setting is done via the configuration menu. By default, complete unlocking is activated. To unlock only the drivers door, with the electronic key on your person, pass your hand behind the driver's door handle then pull on the door handle to open.
Page 56
Locking the vehicle Locating your vehicle This function allows you to identify Ensure that no one prevents the correct your vehicle from a distance, operation of the windows. particularly in poor light. Your vehicle Be aware of children when operating must be locked.
Access Ignition on without starting Deadlocking the engine With the Keyless Entry and Deadlocking renders the exterior and (accessory position) starting system interior door controls inoperative. It also deactivates the manual central control button. With the electronic key in the reader or the Therefore, never leave anyone inside Keyless Entry and Starting key inside the the vehicle when it is deadlocked.
Emergency procedure Emergency unlocking/locking using the integral key Complete unlocking Normal locking Turn the key towards the front of the vehicle Turn the key towards the rear of the vehicle The integral key is used to lock and unlock the to unlock the vehicle.
Page 59
Access Remote control problem - Changing the battery of the electronic key reinitialisation Following disconnection of the vehicle battery, replacement of the remote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle.
Page 60
Lost electronic key Visit a CITROËN dealer with the vehicle's registration document and your personal identification documents and if possible the key code label. The CITROËN dealer will be able to retrieve the key code and the transponder code required to order a new key. Electronic key The electronic key is a sensitive system;...
Access Central locking control Automatic central locking of the Emergency control doors System allowing the doors to be locked and (anti-intrusion security) unlocked manually in the event of a malfunction of the central locking system or battery failure. The doors and boot can lock automatically while driving (speed above 6 mph (10 km/h)).
Page 62
Locking the front and rear Unlocking the front and rear passenger doors passenger doors Open the doors. Pull the interior door opening control. On the rear doors, check that the child lock is not on (see Child Safety). Remove the black cap, located on the edge of the door, using the key.
Access Boot Opening from outside Opening from inside Tailgate release System allowing the mechanical unlocking of the boot in the event of a battery or central locking system malfunction. After unlocking the boot or the vehicle Press this button until the boot is heard to using the electronic key - remote control, unlock.
Alarm - Tilt The monitoring system is active: the indicator lamp in the button flashes once per second. The system checks for any change in the After the locking button on the remote control attitude of the vehicle. is pressed or the vehicle locked using the The alarm is triggered if the vehicle is lifted, Keyless Entry and Starting system, the exterior moved or knocked.
Page 65
Access Locking the vehicle Reactivation of the interior Failure of the remote control volumetric and anti-tilt monitoring with exterior perimeter To deactivate the monitoring functions: monitoring only Press the unlocking button on Unlock the vehicle using the key (integral with the remote control or unlock the the remote control) in the driver's door lock.
Electric windows Manual operation To open or close the window, press or pull the switch gently. The window stops as soon as the switch is released. Automatic operation To open or close the window, press or pull switch fully: the window opens or closes completely when the switch is released.
Page 67
Access Safety anti-pinch When the window rises and meets an obstacle, Reinitialisation of the it stops and immediately partially lowers again. electric windows In the event of unwanted opening of the window on closing, press the switch until the Following reconnection of the battery, the window opens completely, then pull the switch In the event of contact during operation safety anti-pinch function must be reinitialised.
Cockpit glass roof Electric blinds A tinted glass panoramic surface to increase There are two options for opening and closing: the light and visibility in the passenger compartment. Fitted with three electric blinds to improve Pull or press the control without going Pull or press control, going beyond the temperature and noise related comfort.
Page 69
Access Safety anti-pinch In automatic mode and at the end of its travel, If the blind stops and immediately opens again If the blind meets an obstacle during if the blind meets an obstacle while closing it during a closing manoeuvre: operation, you must reverse the stops and moves back slightly.
Fuel tank Capacity of the tank: approximately 60 litres. Opening Refuelling Introduce the nozzle and push it in fully (pushing open the non-return valve A on petrol vehicles). Fill the tank (don't continue past the third cut-off of the nozzle, as this may cause malfunctions).
Access Misfuel prevention (Diesel) * Mechanical device which prevents filling the tank of a Diesel vehicle with petrol. It avoids the risk of engine damage that can result from filling with the wrong fuel. Low fuel level Located in the filler neck, the misfuel prevention device appears when the filler cap is removed. When the low fuel level in the tank is Operation reached, this warning lamp comes on...
Quality of the fuel used for Quality of the fuel used for petrol engines Diesel engines The petrol engines are perfectly compatible The Diesel engines are perfectly compatible with E10 or E24 type petrol biofuels (containing with biofuels which conform to current and 10 % or 24 % ethanol), conforming to European future European standards (Diesel fuel which standards EN 228 and EN 15376.
Page 76
Front seats Manual Adjustments to the height and angle of the head restraint To raise it, pull upwards. To lower it, press on the lug and the head restraint at the same time. 2. Adjustment of the backrest angle Turn the wheel to adjust the angle of the backrest.
Page 77
Comfort Electric Adjustment of the seat cushion angle and height, and forwards-backwards adjustment Raise or lower the front of the control to adjust the seat cushion angle. Raise or lower the rear of the control to raise or lower the seat. Simultaneously raise or lower the front and rear of the control in order to raise or lower the entire seat.
Storing driving positions Storing a position using Recalling a stored position buttons M / 1 / 2 Briefly press button 1 or 2 to recall the Switch on the ignition. corresponding position. Adjust your seat and the head-up display. An audible signal indicates the end of the Press button M , then press button 1 or 2 adjustment.
Page 79
Comfort Head restraint height and angle adjustment To raise a head restraint, pull it upwards. The head restraint is fitted with a frame with notches which prevents it from To remove the head restraint, press the lug A and pull the head restraint upwards. lowering;...
Page 80
Heated seats control Massage function Activation Press this switch. The warning lamp comes on and the massage function is activated for a period of 1 hour. During this time, massage is performed in 6 cycles of 10 minutes (6 minutes of massage followed by 4 minutes break).
Comfort Rear seats Bench seat with split cushion and backrest (left hand 2/3, right hand 1/3) which can be folded individually to adapt the load space in the boot. Folding the cushion and backrest Lift the cushion 1 by hand, lifting from the rear.
Page 82
Repositioning the seat backrest and cushion Keep the seat belt guide 2 held against the Reposition the cushion 1. When repositioning the seat backrest, vehicle to avoid trapping the seat belt when Release the seat belt guide 2. take care not to trap the seat belts. repositioning the seat.
Comfort Removing the seat cushion Rear head restraints These have one position for use (up) and a Remove the seat cushion 1 from its fixings Never drive with the head restraints by pulling upwards. stowed position (down). removed; they must be in place and They can also be removed.
Page 84
Mirrors Door mirrors Folding Automatic: lock the vehicle using the electronic key. Manual: with the ignition on, turn control A downwards. If the mirrors are folded using control A , they will not unfold when the vehicle is unlocked. Adjustment Each fitted with an adjustable mirror glass providing the lateral rearward vision necessary Turn control A to the right or to the left to...
Comfort Steering wheel adjustment Rear view mirror Seeing clearly Adjustable mirror providing a central rearward view. Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to the driver caused by the sun, headlamps from other vehicles... Automatic day/night model When stationary, pull the control lever to release the adjustment mechanism.
Page 86
Interior fi ttings Glove box 2. Storage 3. Storage (according to version) 4. Ticket holder (according to version) 5. Removable ashtray / 12 V accessory socket (120 W) Press the lid to open the ashtray. To empty the ashtray, remove it by pulling it upwards.
Page 87
Comfort Cigarette lighter / Mats 12 V accessory Removable carpet protection. socket Fitting Refitting To refit the mat on the driver's side: position the mat correctly, refit the fixings by pressing, check that the mat is secured correctly. To avoid any risk of jamming of the pedals: only use mats which are suited to the fixings already present in the...
Centre armrest USB Player Comfort and storage system for the driver and This connection box, consisting of a JACK When the USB port is used, the portable device front passenger. auxiliary socket and a USB port, is located in charges automatically. the front armrest (under the cover).
Comfort Rear armrest Ski fl ap Lower the rear armrest for a more Facility for storing and transporting long objects. comfortable position. It may be fitted with cup holders and also gives access to the ski flap. Opening Lower the armrest. Press the flap opening control.
Page 90
Boot fi ttings Rear shelf f It can be removed when carrying large objects. 2. Bag hooks 3. Stowing rings 4. Warning triangle retaining straps...
Page 91
Comfort Warning triangle (stowing) Placing the triangle in the road Place the triangle at a distance behind the vehicle, as shown in the table below, according to the type of road and the level of ambient light. Distance from your vehicle (in metres) Road Motorway Use the straps on the interior boot trim to stow...
Heating and Ventilation System which creates and maintains good conditions of comfort and visibility in the vehicle's passenger compartment. Controls The incoming air follows various routes depending on the controls selected by the driver, the front passenger and rear passengers. The temperature control enables you to obtain the level of comfort required by mixing the air of the various circuits.
Page 93
Comfort Recommendations for ventilation and air conditioning In order for these systems to be fully effective, follow the operation and maintenance If after an extended stop in sunshine, guidelines below: the interior temperature is very high, first To obtain an even air distribution, take care not to obstruct the exterior air intake grilles ventilate the passenger compartment for located at the base of the windscreen, the nozzles, the vents and the air outlets, as well a few moments.
Dual-zone digital air conditioning Automatic operation When the engine is cold, the air flow will reach its optimum level progressively, taking account of the weather and the desired comfort level so as to avoid too great a distribution of cold air. On entering the vehicle, if the interior temperature is much colder or warmer than the comfort value, there is no...
Comfort Manual operation 4. Automatic visibility 2-3. Driver's-passenger's side If you wish, you can make a different choice programme from that offered by the system by changing a settings setting. The "AUTO" indicator lamps go off; the The driver and front passenger can See "Front demisting - defrosting".
Page 96
5. Air conditioning On / Off 6. Air distribution adjustment 8. Air intake / Air recirculation Air recirculation enables the passenger Press this button to switch off Press one or more buttons to compartment to be isolated from exterior odours the air conditioning.
Comfort 9. Maximum air conditioning Switching the system off If you want to quickly cool Turn the air flow control to the the air in the passenger left until all of the indicator compartment, press this lamps go off. button; "LO" is displayed. To return to the previous settings, press the This action switches off the air conditioning and button again.
Front Demist - Rear screen and door mirrors demist - Defrost defrost Switching on Automatic visibility programme Press this button (located on Switch off the demisting/defrosting the air conditioning system of the rear screen and door mirrors Select this programme control panel) to demist/defrost as soon as appropriate, as lower to demist or defrost the...
Starting-switching off the engine With a manual gearbox, put the gear lever in neutral. With the electronic gearbox system , put the gear lever in N. If one of the starting conditions is not With an automatic gearbox , put the gear lever in P or N . met, a reminder message appears in Starting using Starting with the "Keyless...
Page 103
Driving Anti-theft protection Switching off using the If the vehicle is not immobilised, Electronic engine immobiliser electronic key the engine will not stop. The keys contain an electronic chip which has Immobilise the vehicle. a secret code. When the ignition is switched on, this code must be recognised in order for Press the "START/STOP "...
Page 104
Emergency starting with the Emergency switch-off Electronic key not recognised by Keyless Entry and Starting the "Keyless Entry and Starting" system system In the event of an emergency only, the engine can be switched of without conditions. To do this, press and hold the "START/STOP" button for about 3 seconds.
Page 105
Driving Electric parking brake Programming the automatic mode It is recommended that you do not apply the parking brake in very cold Depending on the country of sale of the vehicle, the automatic application when the engine is conditions (ice) and during towing switched off and the automatic release when (breakdown, caravan...).
Manual application Manual release With the vehicle stationary, to apply the parking brake whether the engine is running or off, pull Maximum application control lever A. If necessary, you can make a maximum The application of the parking brake is application of the parking brake.
Page 107
Driving Automatic application, Automatic release engine off The electric parking brake releases automatically and progressively Immobilising the vehicle, With the vehicle stationary, the parking brake when you press the accelerator: engine running is automatically applied when the engine is Manual gearbox : fully depress switched off.
Emergency braking Emergency release In the event of the electric parking brake malfunctioning or the battery running flat, an emergency manual device can release the parking brake. Immobilise the vehicle: - by engaging first gear (manual gearbox), - with the engine running, position P (automatic gearbox) or M or R (electronic gearbox system).
Page 109
Driving For safety reasons, you must contact a CITROËN dealer as soon as possible to replace the protective cover. Take care not to allow moisture or dust in the proximity of the protective cover. Following an emergency unlocking, immobilisation of the vehicle is no longer guaranteed once the manual emergency release has been deployed and the manual control does not allow...
Operating faults If the electric parking brake fault warning lamp comes on together with one or more of the warning lamps presented in these tables, place the vehicle in a safe condition (on level ground, gear engaged) and contact a CITROËN dealer or a qualified workshop without delay. Situations Consequences Display of the message "Parking brake fault"...
Page 111
Driving Situations Consequences To apply the electric parking brake: immobilise the vehicle and switch off the ignition. pull the control for at least 5 seconds or until application is complete. switch on the ignition and check that the electric parking brake and possibly warning lamps come on.
Page 112
Special situations In some circumstances (engine start...), In the event of a malfunction of the parking the parking brake may adjust the level of brake in the on position or a battery failure, application itself. This is normal operation. manual release remains possible. To move your vehicle a few centimetres To ensure correct operation, and so without starting the engine, with the ignition...
Driving Hill start assist Operation System which keeps your vehicle immobilised temporarily (approximately 2 seconds) when starting on a gradient, the time it takes to move your foot from the brake pedal to the accelerator pedal. This system only operates when: the vehicle is completely stationary, with your foot on the brake pedal, in particular conditions on a slope,...
6-speed manual gearbox Engaging 5th or 6th gear Move the lever fully to the right to engage 5th or 6th gear. Engaging reverse gear Raise the trigger under the knob and move the gear lever to the left then forwards. Only engage reverse gear when the vehicle is stationary with the engine at idle.
Page 115
Driving Gear shift indicator * System which reduces fuel consumption by advising the driver to change up on vehicles fitted with a manual gearbox. Operation Example: The system intervenes only when driving economically. Depending on the driving situation and your vehicle's equipment, the system may advise you to skip one or more gears.
Automatic gearbox Gear selection gate Displays in the instrument panel Six speed automatic gearbox which offers a choice between the comfort of fully automatic operation, enhanced by sport and snow programmes, or manual gear changing. Four driving modes are offered: automatic operation for electronic management of the gears by the gearbox, sport programme for a more dynamic style...
Driving Moving off Automatic operation With your foot on the brake, select Select position D for automatic changing position P or N . of the six gears. Start the engine. The gearbox then operates in auto-adaptive If this procedure is not followed, an audible mode, without any intervention on the part signal is heard, accompanied by a message in of the driver.
Page 118
Sport and snow programmes Return to automatic Manual operation operation Select position M for sequential changing These two special programmes supplement the At any time, press the button selected of the six gears. automatic operation in very specific conditions again to quit the programme engaged and Push the lever towards the + sign to of use.
Page 119
Driving Operating fault Invalid value during manual When the ignition is on, a message appears operation in the instrument panel screen to indicate a gearbox fault. This symbol is displayed if a gear In this case, the gearbox switches to back-up is not engaged correctly (selector mode and is locked in 3rd gear.
6-speed electronic gearbox system Gear lever Steering mounted control paddles Six-speed electronic gearbox system which offers a choice between the comfort of fully automatic operation or the pleasure of manual gear changing. There are two driving modes: automatic mode for automatic control of the gears by the gearbox, manual mode for sequential gear changing by the driver.
Driving Displays in the instrument Moving off When the engine is idling with the panel brakes off, if position R, A or M is Select position N . selected, the vehicle will move off Press the brake pedal down fully. on its own without any action on the Start the engine.
Manual mode Manual gear changing The gear change requests are only carried out if the engine speed permits. It is not necessary to release the accelerator during gear changes. When braking or slowing down, the gearbox changes down automatically to permit acceleration in the correct gear.
Page 123
Driving Sport setting Stopping the vehicle Operating fault Before switching off the engine, you can With the ignition on, the After selection of manual or choose to: flashing of this warning lamp, automated mode, press the S button to switch on the Sport move to position N to engage neutral, accompanied by an audible leave the gear engaged;...
Page 124
Stop & Start The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently. Perfect for urban use, the Stop &...
Page 125
Driving Deactivation Going into engine START mode Special cases: START invoked automatically The "ECO" warning lamp goes off START mode is invoked automatically when: and the engine starts automatically the driver's door is open, with the electronic gearbox system : the driver's seat belt is not fastened, the speed of the vehicle exceeds 7 mph ●...
Page 126
Reactivation Operating fault Maintenance Before doing anything under the bonnet, Press the "ECO OFF" switch again. deactivate the Stop & Start system to The system is active again; this is confirmed avoid any risk of injury resulting from by the switch warning lamp going off and a automatic operation of START mode.
Driving Lane departure warning system Activation Operating fault Press this button, the indicator In the event of a fault, the indicator lamp in the lamp comes on. button flashes. Contact a CITROËN dealer or a qualified workshop. Detection - alert You are warned by the vibration of the driver's seat cushion: on the right-hand side, if the marking on the...
Head-up display Displays during operation System which projects information onto a Head-up display on / off. transparent strip in the field of vision of the 2. Display height adjustment. driver so that they do not have to take their 3. Brightness adjustment. eyes off the road.
Driving Activation / Deactivation Brightness adjustment We recommend that adjustments are only made using these buttons when the vehicle is stationary. When stationary or while driving, no objects should be placed around the transparent strip (or on its cover) to avoid blocking the strip output and preventing its correct operation.
Memorising speeds You can memorise up to 5 speeds in the system. By default, some speeds are already memorised. With the Audio System With eMyWay Access Go to the main menu by Go to the main menu by press the steering mounted "MEM" button pressing the "MENU"...
Driving Speed limiter Steering mounted controls Displays in the instrument panel System which prevents the vehicle from exceeding the speed programmed by the driver. When the programmed speed limit is reached, pressing the accelerator pedal no longer has any effect. Operation The speed limiter is switched on manually: it requires a programmed speed of at least...
Page 132
Programming Exiting the speed limiter mode Turn dial 1 to the "LIMIT" position: the speed limiter mode is selected but is not Turn dial 1 to the "0" position: the speed switched on (Pause). limiter mode is deselected. It disappears You do not have to switch the speed limiter on from the screen.
Driving Cruise control Steering mounted controls Displays in the instrument panel System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal. Operation The cruise control is switched on manually: it requires a minimum vehicle speed of 25 mph (40 km/h) and engagement of: fourth gear on the manual gearbox,...
Page 134
Programming Operating fault Turn dial 1 to the "CRUISE" position: the In the event of a cruise control malfunction, cruise control mode is selected but is not the speed is cleared resulting in flashing of the switched on (Pause). dashes. Set the programmed speed by accelerating Have it checked by a CITROËN dealer or a to the required speed, then press button 2...
Driving Parking sensors Rear parking sensors The system is switched on by engaging reverse gear. This is accompanied by an audible signal. The system is switched off when you exit reverse gear. This system indicates the proximity of an obstacle (person, vehicle, tree, gate, etc.) which comes within the field of detection of sensors located in the bumper.
Page 136
Front parking sensors Operating fault Deactivation / Activation of the front and rear parking sensors In addition to the rear parking sensors, the front In the event of a malfunction parking sensors are triggered when an obstacle of the system, when reverse is detected in front and the speed of the vehicle gear is engaged this warning is still below 6 mph (10 km/h).
Page 137
Driving Reversing camera A reversing camera is activated automatically The green lines represent the general direction The red lines represent around 30 cm beyond when reverse gear is engaged. of the vehicle. the limit of your vehicle's rear bumper. The colour image is provided in the navigation The audible signal becomes continuous screen.
Lighting controls System for selection and control of the various front and rear lamps providing the vehicle's lighting and signalling. Main lighting Additional lighting Automatic lighting functions There are various lamps on the vehicle: Other lamps are installed to fulfil the Various automatic lighting functions are also sidelamps, to be seen, requirements of particular driving conditions:...
Page 141
Visibility Selection ring for main lighting mode Turn the ring to position the symbol required facing the mark. Lighting off. Automatic illumination of headlamps. Sidelamps only. Dipping the headlamps Dipped or main beam headlamps. Pull the stalk to switch the lighting between dipped / main beam headlamps.
Page 142
The foglamps operate with dipped and main beam headlamps. In good or rainy weather, both day and night, the front foglamps and the rear foglamps are prohibited. In these situations, the power of their beams may dazzle other drivers. They should only be used in fog or snow.
Page 143
Visibility Daytime running lamps (LEDs) Lighting left on audible signal An audible signal when a front door is opened warns the driver that the vehicle's exterior lighting is on, with the ignition off and in manual lighting mode. In this case, switching off the lighting stops the audible signal.
Automatic illumination of headlamps Operating fault Association with the automatic "Guide-me-home" lighting switched on automatically, without any action on In the event of a malfunction the part of the driver, when a low level of external Association with the automatic lighting provides of the sunshine sensor, light is detected or in certain cases of activation of the "guide-me-home"...
Page 145
Visibility Automatic headlamp dipping Switching off Switching on Put the lighting control stalk ring Press the button, the warning in the "AUTO" position. lamp goes off, the headlamps remain in their current position . Press the button, its warning lamp comes on. Activation Pause System which automatically changes between...
Manual guide-me-home Parking lamps lighting The system may suffer interference or not work correctly: under conditions of poor visibility (for example, snowfall, heavy rain or thick fog, ...), if the windscreen is dirty, misted or obscured (by a sticker, ...) in front of the camera, if the vehicle is facing highly reflective signs.
Visibility Exterior welcome Door mirror lighting spotlamps Programming The remote switching on of the lighting makes The lighting duration is selected via your approach to the vehicle easier in poor the vehicle configuration menu. light. It is activated according to the level of light detected by the sunshine sensor.
Page 148
Manual adjustment Automatic adjustment of xenon headlamps of halogen headlamps To avoid causing a nuisance to other road users, In order to avoid causing a nuisance to other If a fault occurs, do not touch the xenon the height of the halogen headlamps should be road users, this system corrects the height of the bulbs.
Page 149
Visibility Directional lighting Programming When the dipped or main beam headlamps are on, this function, allows the light beams to better follow the road. The system is activated or The use of this function, coupled with the deactivated in the vehicle xenon headlamps and the cornering lighting, configuration menu.
Cornering lighting Switching on This function starts: when the corresponding direction indicator is switched on, from a certain angle of rotation of the steering wheel. Switching off With dipped or main beams, this function with cornering lighting The system does not operate: makes use of the beam from a front foglamp to below a certain angle of rotation of the illuminate the inside of a bend, when the vehicle...
Visibility Wiper controls Manual controls The vehicle's front and rear wipers are designed to improve the driver's visibility The wipers are controlled directly by the driver. progressively according to the climatic conditions. Windscreen wipers Programming Wiping speed: Various automatic wiper control modes are also available according to the following options: fast (heavy rain), automatic rain sensitive windscreen wipers,...
Page 152
Rear wiper Windscreen and headlamp wash Rear wiper selection ring: park, intermittent wipe, wash-wipe (set duration). Reverse gear If a significant accumulation of snow Pull the windscreen wiper stalk towards or ice is present, or when using a When reverse gear is engaged, the rear wiper you.
Visibility Automatic rain sensitive windscreen wipers The windscreen wipers operate automatically, without any action on the part of the driver, if rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rainfall. Switching on Switching off Briefly push the control stalk Briefly push the control stalk...
Special position of the windscreen wipers Operating fault If a fault occurs with the automatic rain sensitive wipers, the wipers will operate in intermittent mode. Have it checked by CITROËN dealer or a qualified workshop. This position permits release of the windscreen To maintain the effectiveness of the Do not cover the rain sensor, linked with wiper blades.
Visibility Courtesy lamps Front - rear courtesy lamps Front - rear map reading lamps In this position, the courtesy lamp With the ignition on, press the comes on gradually: corresponding switch. when the vehicle is unlocked, when the electronic key is removed from Take care to avoid leaving anything in the reader, contact with the courtesy lamps.
Interior mood lighting Footwell lighting The dimmed passenger compartment lighting improves visibility in the vehicle when the light is poor. Switching on Adjusting the brightness of the courtesy lamp The soft lighting provided by the footwell lamps improves visibility in the vehicle when the light is poor.
Page 160
General points relating to child seats Although one of CITROËN main criteria when designing your vehicle, the safety of your children also depends on you. For maximum safety, please observe the CITROËN recommends that children following recommendations: should travel in the outer r rear seats of in accordance with European regulations, your vehicle: all children under the age of 12 or less...
Page 161
Child safety Child seat in the front "Rearwards-facing" "Forwards-facing" Passenger seat in the fully back and highest position. When a "rearwards-facing" child seat is When a "forwards-facing" child seat is installed installed on the front passenger seat , it on the front passenger seat, adjust the is essential that the passenger airbag is vehicle's seat to the fully back and highest deactivated.
Passenger airbag OFF Refer to the advice given on the label present To assure the safety of your child, you on both sides of the passenger's sun visor. must deactivate the passenger's front airbag when you install a child seat in the rearwards facing position on the front passenger's seat.
Page 163
Child safety Child seats recommended by CITROËN CITROËN offers a complete range of recommended child seats which are secured using a three point seat belt: Group 0+: from birth to 13 kg Groups 1, 2 and 3: from 9 to 36 kg "KIDDY Comfort Pro"...
Page 164
Installing child seats attached using the seat belt In accordance with European regulations, this table indicates the options for installing child seats secured using a seat belt and universally approved (a) in accordance with the weight of the child and the seat in the vehicle: Weight of the child and indicative age Under 13 kg From 9 to 18 kg...
Child safety Advice on child seats The incorrect installation of a child seat in a Children under the age of 10 must not travel As a safety precaution, do not leave: vehicle compromises the child's protection in in the "forwards-facing" position on the front a child or children alone and the event of an accident.
Page 166
"ISOFIX" mountings Your vehicle has been approved in accordance There are three rings for each seat. This ISOFIX mounting system provides fast, with the latest ISOFIX regulations . Two rings A , located between the vehicle reliable and safe fitting of the child seat in your The seats, represented below, are fitted with seat back and cushion, indicated by a label.
Page 167
Child safety ISOFIX child seat Recommended by CITROËN and approved for your vehicle RÖMER Duo Plus ISOFIX (size category B1 ) Group 1: from 9 to 18 kg Installed only in the forwards-facing position. Fitted with an upper strap to be secured on the upper ring B, referred to as the TOP TETHER. Three seat body angles: sitting, reclining, lying.
Page 168
Locations for installing ISOFIX child seats In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings. In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G , is indicated on the child seat next to the ISOFIX logo.
Page 169
Child safety Electric child lock Remote control system to prevent opening of the rear doors using their interior controls and use of the rear electric windows. Any other status of the indicator lamp indicates a fault with the electric child lock.
Direction indicators Hazard warning lamps Automatic operation of hazard warning lamps When braking in an emergency, depending on the rate of deceleration, as well as when the ABS regulation is invoked or in the event of an impact, the hazard warning lamps come on automatically.
Safety Emergency or Horn assistance call Audible warning system to alert other road users to an imminent danger. This system allows you to make an emergency Press the central part of the multifunction or assistance call to the emergency services or steering wheel.
Page 174
Tyre under-infl ation detection All repairs and changing of tyres on a wheel fitted with this system must be System which automatically checks the pressure of the tyres while driving. carried out by a CITROËN dealer or a Puncture qualified workshop. If, when changing a tyre, you install a This warning lamp and wheel which is not detected by your...
Safety Electronic stability programme (ESP) Definitions Electronic Stability Programme incorporating the following systems: Anti-lock braking system (ABS) Anti-slip regulation (ASR) the anti-lock braking system (ABS) and the and electronic brake force electronic brake force distribution (EBFD), The ASR system (also known as Traction distribution (EBFD) the emergency braking assistance, Control) optimises traction in order to avoid...
Page 176
Intelligent traction control Operation system ("Snow motion") Anti-lock braking system (ABS) When changing wheels (tyres and rims), Your vehicle has a system to help driving on and electronic brake force make sure that these are approved for snow: intelligent traction control. distribution (EBFD) your vehicle.
Safety But it is recommended that the system be The DSC system offers exceptional reactivated as soon as possible. safety in normal driving, but this should not encourage the driver to take extra Press the button. risks or drive at high speed. The correct operation of the system depends on observation of the This warning lamp and the indicator...
Seat belts Front seat belts Rear seat belts Fastening The rear seats are each fitted with a seat belt, three-point anchorages with inertia reel and Pull the strap, then insert the tongue in the force limiter (except for the centre rear seat). The front seat belts are fitted with a buckle.
Page 179
Safety Front seat belt warning lamps On switching on the ignition, warning lamp 1 comes on in the instrument panel and the corresponding warning lamp 2 and/or 3 come(s) on in red in the passenger's seat belt and front airbag warning lamp display if the corresponding seat belt is not fastened or is unfastened.
Page 180
Recommendations for children The driver must ensure that passengers use In order to be effective, a seat belt must: the seat belts correctly and that they are all be tightened as close to the body as Use a suitable child seat if the passenger is restrained securely before setting off.
Safety Airbags Front airbags System designed to maximise the safety of the occupants (with the exception of the rear centre passenger) in the event of violent collisions. It supplements the action of the force-limiting seat belts (with the exception of the rear centre passenger).
Page 182
Operating fault To assure the safety of your child, the passenger's front airbag must be If this warning lamp comes on in the deactivated when you install a "rear instrument panel, accompanied by an facing" child seat on the front passenger audible warning and a message in the seat.
Safety Lateral airbags Deployment The curtain airbag is deployed at the same time as the corresponding lateral airbag in the event of a serious side impact applied to all or part of the side impact zone B , perpendicular to the longitudinal centreline of the vehicle on a horizontal plane and directed from the outside towards the inside of the vehicle.
Page 184
For the airbags to be fully effective, observe the following safety rules: Front airbags Lateral airbags Sit in a normal upright position. Wear a correctly adjusted seat belt. Do not drive holding the steering wheel by its Use only approved covers on the seats, Do not leave anything between the spokes or resting your hands on the centre compatible with the deployment the lateral...
Page 188
Temporary puncture repair kit List of tools Complete system consisting of a compressor and a sealant cartridge which permits All of these tools are specific to your vehicle temporary repair of a tyre so that you can and can vary according to equipment. Do not drive to the nearest garage.
Page 189
Practical information Description of the kit The tyre inflation pressures are given on this A. "Sealant" or "Air" position selector. Sealant cartridge. label. B. On "I" / off "O" switch. G. White pipe with cap for repair. C. Deflation button. H.
Page 190
1. Sealing Uncoil the white pipe G fully. Connect the compressor's electric plug to Unscrew the cap from the white pipe. the vehicle's 12 V socket. Switch off the ignition. Connect the white pipe to the valve of the Start the vehicle and leave the engine Turn the selector A to the "sealant"...
Page 191
Practical information Switch on the compressor by moving Remove the kit and screw the cap back on the switch B to position "I" until the tyre the white pipe. pressure reaches 2.0 bars. Take care to avoid staining your vehicle The sealant is injected into the tyre under with traces of fluid.
Page 192
2. Infl ation Connect the compressor's electric plug to Adjust the pressure using the compressor the vehicle's 12 V socket. (to inflate: switch B in position "I" ; to Turn the selector A to the "air" Start the vehicle again and leave the deflate: switch B in position "O"...
Practical information Removing the cartridge Checking tyre pressures / inflating accessories Stow the black pipe. Detach the angled base from the white pipe. Support the compressor vertically. Unscrew the cartridge from the bottom. You can also use the compressor, without Connect the compressor's electrical injecting any product, to: connector to the vehicle's 12 V socket.
Changing a wheel Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle * . Access to the tools List of tools * All of these tools are specific to your vehicle and can vary according to the level of equipment.
Page 195
Practical information Access to the spare wheel Taking out the wheel The spare wheel is supported by a cable-driven Raise the floor to reveal the spare wheel Detach the wheel from the rear of the carrier underneath the vehicle. carrier drive nut. vehicle.
Page 196
Putting the wheel back in place Pass the hook with its connection plate into Raise the wheel underneath the vehicle by Tighten fully and check that the wheel is the wheel, as illustrated. turning the carrier drive nut anticlockwise horizontally flush against the floor. using the wheelbrace 1 and the extension 8 .
Practical information Removing a wheel Parking the vehicle Immobilise the vehicle where it does not block traffic: the ground must be level, stable and not slippery. Apply the parking brake unless it has been programmed to automatic mode, switch off the ignition and engage first gear * to block the wheels.
Page 198
Place the jack 2 in contact with one of the Extend the jack 2 until its base plate is in Raise the vehicle until there is sufficient two front A or rear B locations provided on contact with the ground. Ensure that the space between the wheel and the ground the underbody, whichever is closest to the centreline of the jack base plate is directly...
Practical information Fitting a wheel Fitting the "space-saver" spare wheel If your vehicle is fitted with alloy wheels, when tightening the bolts on fitting, it is normal to notice that the washers do not come into contact with the "space-saver" spare wheel. The wheel is secured by the conical surface of each bolt.
Page 200
Lower the vehicle fully. Tighten the security bolt using the Fold the jack 2 and detach it. wheelbrace 1 fitted with the security socket 5. Tighten the other bolts using the wheelbrace 1 only. Refit the bolt covers on each of the bolts or the hub cap (depending on equipment).
Practical information Changing a bulb Front lamps Model with xenon headlamps Main beam headlamps (H1-35W). 2. Directional dipped / directional Risk of electrocution headlamps (D1S-35W). Xenon bulbs (D1S-35W) must be 3. Daytime running lamps / sidelamps replaced by a CITROËN dealer or a (light emitting diodes - LEDs).
Page 202
The headlamps are fitted with polycarbonate glass with a protective coating: do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product, use a sponge and soapy water, when using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long,...
Practical information Main beam headlamps Dipped beam headlamps (halogen model) (halogen model) Remove the protective plastic cover by Remove the protective plastic cover by Press on the top of the connector then pulling on the tab. pulling on the tab. pivot the assembly downwards.
Page 204
Daytime running lamps / sidelamps Direction indicators For the replacement of this type of LED lamp For reassembly, carry out these operations in Faster flashing of a direction indicator and lighting guides, contact a CITROËN dealer reverse order. warning lamp (left or right) indicates a or a qualified workshop.
Practical information Door mirror spotlamps Integrated direction indicator Front foglamps side repeaters You should contact a CITROËN dealer or a You should contact a CITROËN dealer or a Remove the deflector under the body. qualified workshop for the replacement of the qualified workshop for the replacement of these Disconnect the bulb connector.
Rear lamps Direction indicators and brake Sidelamps lamps (on the wings) (light emitting diodes - LEDs). 2. Direction indicators (PY21W amber). Open the boot then remove the access Carefully remove the lamp unit from 3. Reversing lamps (P21W). cover. outside. The retaining clips unclip 4.
Page 207
Practical information Reversing lamp (tailgate) Foglamp Open the tailgate. Carefully remove the lamp from the Access is by passing a hand under the bumper. Turn the bulb holder a quarter of a turn and Unclip the skirt of the lamp. outside.
Third brake lamp Number plate lamps (light emitting diodes - LEDs) Insert a thin screwdriver into the slot Contact a CITROËN dealer or qualified in the lens. workshop. Push it outwards to unclip it. Remove the lens. Pull the bulb out and change it.
Practical information Changing a fuse Procedure for replacing a failed fuse with a new fuse to rectify a failure of the corresponding function. Access to tooling Changing a fuse Installing electrical accessories Your vehicle's electrical system is designed to operate with standard or optional equipment.
Page 210
Dashboard fuses Fuse Rating Functions N° The fusebox is placed in the lower dashboard F6 A or B Audio system. (left-hand side). Alarm. Front cigarette lighter, front 12 V socket. Rear 12 V socket. Rear map reading lamps. Courtesy mirror. F28 A or B Audio system.
Page 211
Practical information Engine compartment fuses Fuse Rating Functions N° Front / rear screenwash pump. Headlamp wash pump. Horn. Right-hand main beam headlamp. Left-hand main beam headlamp. Left hand lamp mask. Right hand lamp mask. The fusebox is placed in the engine compartment near the battery.
Page 212
12 V battery Procedure for starting the engine using another battery or charging a discharged battery. Access to the battery The presence of this label indicates the use of a 12 V lead-acid battery with special technology and specification, for Disconnecting the (+) cable which the involvement of a CITROËN Raise the locking tab D fully to release the...
Practical information Starting using another Charging the battery using battery a battery charger When your vehicle's battery is discharged, The Stop & Start battery does not have the engine can be started using a slave battery to be disconnected for charging. (external or on another vehicle) and jump lead cables.
Page 214
Before disconnecting the battery The batteries contain harmful substances Protect your eyes and face before Wait 2 minutes after switching off the ignition such as sulphuric acid and lead. They handling the battery. before disconnecting the battery. must be disposed of in accordance All operations on the battery must be Close the windows and the doors before with regulations and must not, in any...
Practical information Load reduction mode Energy economy mode Exiting economy mode System which manages the use of certain System which manages the duration of use of functions according to the level of charge certain functions to conserve a sufficient level These functions are reactivated automatically remaining in the battery.
Changing a wiper blade Before removing a front Fitting wiper blade Put the corresponding new wiper blade in place and clip it. Within one minute after switching off Fold down the wiper arm carefully. the ignition, operate the wiper stalk to position the wiper blades vertically on the windscreen.
Practical information Towing the vehicle Towing your vehicle Towing another vehicle Procedure for having your vehicle towed or for towing another vehicle using a removable towing eye. Access to the tools On the front bumper, unclip the cover by On the rear bumper, unclip the cover by pressing at the bottom to disengage the levering at the left with the point of the securing lugs.
Towing a trailer We recommend the use of genuine Towbar suitable for the attachment of a CITROËN towbars and their harnesses trailer or installation of a bicycle carrier, with that have been tested and approved additional lighting and signalling. from the design stage of your vehicle, and that the fitting of the towbar is entrusted to a CITROËN dealer or a Your vehicle is primarily designed for...
Page 219
Practical information Driving advice Distribution of loads Cooling Braking Distribute the load in the trailer so that Towing a trailer on a slope increases the Towing a trailer increases the braking distance. the heaviest items are as close as temperature of the coolant. To avoid overheating of the brakes on a long possible to the axle and the nose weight As the fan is electrically controlled, its cooling...
Fitting roof bars When fitting transverse roof bars, take care to Use accessories recommended by position them correctly: rack, for a loading height not exceeding CITROËN observing the manufacturer's 40 cm (with the exception of bicycle recommendations and fitting carriers): 70 kg. instructions so as to avoid the risk If the height exceeds 40 cm, adapt the of damaging the body (deformation,...
Page 221
Practical information Accessories A wide range of accessories and genuine parts is available from the CITROËN dealer network. These accessories and parts have been tested and approved for reliability and safety. They are all adapted to your vehicle and benefit from CITROËN's recommendation and warranty. "Comfort": "Styling": "Protection":...
Page 222
"Multimedia": By visiting a CITROËN dealer you can also obtain cleaning and maintenance products audio systems, steering mounted audio (interior and exterior) - including ecological controls, speakers, Hi-Fi module, Bluetooth products in the "TECHNATURE" range, hands-free system, portable satellite navigation products for topping up (screenwash...), paint system, semi-integral support bracket for touch-up pens and aerosols for the exact colour...
Checks Opening the bonnet Before doing anything under the bonnet, switch off the Stop & Start system to avoid any risk of injury resulting from an automatic change to START mode. Opening From inside: pull the release lever, located From the outside: lift the safety catch and raise the bonnet.
Page 228
Petrol engines The various caps and covers allow access for checking the levels of the various fluids and for replacing certain components. Power steering reservoir. 2. Screenwash and headlamp wash reservoir. 3. Coolant reservoir. 4. Brake fluid reservoir. 5. Battery / Fuses. 6.
Page 229
Checks Diesel engines The various caps and covers allow access for checking the levels of the various fluids, for replacing certain components and for priming the fuel system. Power steering reservoir. 2. Screenwash and headlamp wash reservoir. 3. Coolant reservoir. 4.
Page 230
Running out of fuel (Diesel) 1.6 litre HDi engine 2 litre HDi engine system must be primed if you run out of fuel; refer to the corresponding engine compartment view. Fill the fuel tank with at least five litres Fill the fuel tank with at least five litres of If the tank on your vehicle is fitted with of diesel.
Checks Checking levels If a level drops significantly, have the corresponding system checked by a CITROËN dealer or a qualified workshop. Check all of these levels regularly, in line with the servicing booklet and the requirements of the warranty. Top them up if necessary, unless otherwise indicated. Take care when working under the bonnet, as certain areas of the engine may be extremely hot (risk of burns).
Coolant level Brake fluid level The brake fluid level should be close to the "MAX" mark. If it is not, check Changing the coolant The coolant level should be close the brake pad wear. to the "MAX" mark but should never The coolant does not have to be changed.
Page 233
Checks Screenwash / headlamp Diesel additive level wash level (Diesel engine with particle emission filter) A low additive level is indicated by illumination of the service warning lamp, accompanied by an audible warning and a message in the instrument panel screen. Topping up This additive must be topped up by a CITROËN dealer or a qualified workshop without delay.
Page 234
Checks Unless otherwise indicated, check these components in accordance with the servicing booklet and according to your engine. 12 V battery Otherwise, have them checked by a CITROËN The battery does not require any dealer or a qualified workshop. maintenance. However, check that the terminals are clean and correctly tightened, particularly in summer and winter.
Checks Air filter and passenger compartment filter Particle emission filter (Diesel) Refer to the servicing booklet for The start of saturation of the details of the replacement intervals particle filter is indicated by As soon as the traffic conditions permit, for these components.
Manual gearbox Brake pads Electric parking brake The gearbox does not require any Brake wear depends on the style maintenance (no oil change). of driving, particularly in the case This system does not require any Refer to the servicing booklet for the of vehicles used in town, over short routine servicing.
Page 240
Petrol engines and gearboxes Petrol engines 155 hp 200 hp Automatic Manual Gearboxes (6-speed) (6-speed) Model codes Cubic capacity (cc) 1 598 1 598 Bore x stroke (mm) 77 x 85.8 77 x 85.8 Max power: EU standard (kW) Max power engine speed (rpm) 6 000 5 800 Max torque: EU standard (Nm)
Page 241
Technical data Petrol weights and towed loads (in kg) Petrol engines 155 hp 200 hp Automatic Manual Gearboxes (6-speed) (6-speed) Model codes Unladen weight Kerb weight * 1 495 1 505 Gross vehicle weight (GVW) 2 035 2 050 Gross train weight (GTW) 3 335 2 800 on a 12 % gradient...
Page 242
Petrol weights and towed loads (in kg) - Commercial versions Petrol engines 155 hp 200 hp Automatic Manual Gearboxes (6-speed) (6-speed) Model codes Unladen weight Kerb weight * 1 495 1 505 Gross vehicle weight (GVW) 2 170 2 195 Gross train weight (GTW) 3 320 2 795...
Page 243
Technical data Diesel engines and gearboxes e-HDi Diesel engines 110/115 hp 160 hp PEF 160 hp PEF Electronic gearbox system Manual Automatic Gearboxes (6-speed) (6-speed) (6-speed) Model codes 9HR/9HD Cubic capacity (cc) 1 560 1 997 Bore x stroke (mm) 75 x 88.3 85 x 88 Max power: EU standard (kW)
Page 244
Diesel weights and towed loads (in kg) e-HDi Diesel engines 110/115 hp 160 hp PEF 160 hp PEF Electronic gearbox system Manual Automatic Gearboxes (6-speed) (6-speed) (6-speed) Model codes 9HR/9HD Unladen weight Kerb weight * 1 495 1 605 1 615 Gross vehicle weight (GVW) 2 020 2 130...
Page 245
Technical data Diesel weights and towed loads (in kg) - Commercial versions e-HDi Diesel engines 110 hp 160 hp PEF 160 hp PEF Electronic gearbox system Manual Automatic Gearboxes (6 speed) (6-speed) (6-speed) Model codes Unladen weight Kerb weight * 1 495 1 605 1 615...
Page 247
Technical data Identifi cation markings Various visible markings for the identification of your vehicle. It bears the following information: the tyre inflation pressures with and without load, the tyre sizes, the brands of tyre recommended by the manufacturer, the inflation pressure of the spare wheel, the paint colour code.
Page 251
MyCITROËN personal space, via the CITROËN is possible in the official national language of your choice. Internet website in your country, accessible on www.citroen.com. For technical reasons, particularly to improve the quality of Telematic services to customers, the manufacturer reserves the right to carry out updates to the * These services are subject to conditions and availability.
Page 253
eMyWay SATELLITE NAVIGATION SYSTEM MULTIMEDIA BLUETOOTH TELEPHONE AUDIO SYSTEM CONTENTS 01 First steps - Control panel 02 Steering mounted controls 03 General operation The system is protected in such a way that it will only operate in your vehicle. 04 Navigation - Guidance 05 Traffic information 06 Using the telephone 07 Contacts - ADDR BOOK...
Page 254
01 FIRST STEPS Short press: select a preset Display the list of radio stations received, CD/MP3/ radio station. Apple player tracks or folders. ® ® TA (Traffi c Long press: store the Long press: management of the classifi cation of Announcement) current radio station.
Page 255
FIRST STEPS Abandon the current operation, go up one level. Long press: return to permanent display. Access to the "Telephone " menu Reject an incoming call or end a and display the list of recent calls call in progress. or accept an incoming call. Access to the "Navigation - Access to the "Traffi...
Page 256
Rotation Radio -automatic selection of next / previous frequency. Media: previous / next track. Press then rotation: access to 6 preset stations. Change the audio source. TEL button (short press): Accept an incoming call Call in progress: access to telephone menu: hang up, secret mode, hands-free mode.
GENERAL OPERATION Press the MODE button several times in succession for access to the following displays: "RADIO " "FULL SCREEN MAP" "TELEPHONE" "MAP IN WINDOW " (If conversation in progress) (If navigation guidance in progress) Changing the audio source: SETUP: PARAMETERS RADIO: RADIO broadcasts.
Page 258
GENERAL OPERATION DISPLAY ACCORDING TO CONTEXT Select destination DTMF ring tones A press on the dial gives access to short- cut menus according to the display in the Enter an address Hang up screen. Directory RADIO: MUSIC MEDIA PLAYERS, CD or USB GPS coordinates (according to media): Activate / Deactivate TA...
NAVIGATION - GUIDANCE Access to the "NAVIGATION" menu Contact a CITROËN dealer for mapping updates. Press NAV. A short press on the end of the lighting control stalk repeats the last navigation message. To delete the list of recent destinations, select "Guidance Go from the list to the menu (left/right).
Page 260
NAVIGATION - GUIDANCE Selection the town from the list offered, then confi rm. SELECTING A DESTINATION A pre-set list (by entering the fi rst few letters) of the towns in the country selected can be accessed directly by selecting and confi...
Page 261
NAVIGATION - GUIDANCE SELECTING A DESTINATION TO ONE OF THE RECENT DESTINATIONS TOWARDS A CONTACT IN THE CONTACTS DIRECTORY Press NAV to display the "Navigation - Navigation towards a contact imported from your telephone is only guidance" menu. possible if the address is compatible with the system. Press NAV to display the "Navigation - Select the desired destination and guidance"...
Page 262
NAVIGATION - GUIDANCE TOWARDS GPS COORDINATES TOWARDS A POINT ON THE MAP With the map displayed, press OK to Press NAV to display the "Navigation - display the contextual menu. Select guidance " menu. "Move the map " and confi rm. Select "Select destination"...
Page 263
NAVIGATION - GUIDANCE The points of interest (POI) indicate all of the service locations in the vicinity TOWARDS POINTS OF INTEREST (POI) (hotels, various businesses, airports...). Press NAV to display the "Navigation - Select " Search by Name " to search for POIs by name and not by guidance"...
Page 264
Zooming in on this icon shows details of the POIs. LIST OF PRINCIPAL POINTS OF INTEREST (POI) The detailed procedure for updating POIs can be found at "http://citroen.navigation.com". * According to availability in the country.
Page 265
The detailed procedure for updating risk area POIs can be found at Press NAV to display the "Navigation - www.citroen.com. guidance" menu. Select " Guidance options " and confi rm, then select "Set parameters for risk areas "...
Page 266
04 NAVIGATION - GUIDANCE ADDING A STAGE ORGANISING STAGES Press NAV to display the " Navigation - To organise stages, carry out operations 1 guidance" menu. to 2 again, then select " Order/delete journey legs " and confi rm. Select " Journey leg and route " then Select the stage that you want to move confi...
ROUTE OPTIONS CALCULATION CRITERIA Select " Defi ne calculation criteria" and confi rm. This function allows modifi cation of: the guidance criteria: (" Fastest Press NAV to display the " Navigation - route", " Shortest route", guidance" menu. "Distance/Time "), the exclusion criteria: ("...
Page 268
04 NAVIGATION - GUIDANCE MAP MANAGEMENT SELECTING THE POINTS OF INTEREST DISPLAYED ON THE MAP Select from the various categories the Press NAV to display the " Navigation - ones that you want to display on the guidance" menu. screen. Select "...
Page 269
NAVIGATION - GUIDANCE MAP ORIENTATION Select: "Vehicle direction" to have the map follow the direction of travel, Press NAV to display the " Navigation - "North direction" to keep the map guidance" menu. always North up, "Perspective view " to display a perspective view.
Page 270
04 NAVIGATION - GUIDANCE ADJUSTING THE GUIDANCE SPEECH SYNTHESIS The volume setting of guidance messages is also accessible via the ADJUSTING THE VOLUME/DEACTIVATION "SETUP" / " Voice synthesis " menu. The volume of messages can be adjusted during the transmission Select the volume graph and confi...
Page 271
MALE VOICE / FEMALE VOICE Press SETUP to display the confi guration menu. Select "Voice synthesis " and confi rm. Select "Select male voice " or "Select female voice" then confi rm " Yes " to activate a male or female voice. The system restarts.
05 TRAFFIC INFORMATION Access to the "TRAFFIC INFORMATION" menu Press "TRAFFIC". Go from the list to the menu (left/right).
Page 273
TRAFFIC INFORMATION CONFIGURE THE FILTERING AND DISPLAY OF TMC MESSAGES TMC (Traffi c Message Channel) messages contain information on traffi c and weather conditions, received in real time and transmitted to the driver in the form of audible announcements and symbols on the navigation map. The navigation system can then suggest an alternative route to avoid a traffi...
Page 274
05 TRAFFIC INFORMATION PRINCIPAL TMC SYMBOLS RECEIVING TA MESSAGES The TA (Traffi c Announcement) function gives priority to TA alert Black and blue triangle: general information, for example: messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traffi c report is transmitted, the current audio source (Radio, CD, USB, ...) is interrupted automatically to play the TA message.
USING THE TELEPHONE Access to the "TELEPHONE" menu In the top bar of the permanent display No telephone connected. Press this button. Telephone connected. Incoming call. Outgoing call. Synchronisation of address book in progress. Telephone call in progress. To make a call, select a number in the list and confi rm " OK" to start the call.
Bluetooth mobile telephone to the hands-free system of the audio unit must be FIRST CONNECTION carried out with the vehicle stationary. Visit www.citroen.co.uk for more information (compatibility, Select "Peripherals search" and additional help, ...). confi rm.
Page 277
USING THE TELEPHONE The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you. Then accept automatic connection on the telephone to allow the The "Hands-free mode"...
06 USING THE TELEPHONE Use of the telephone is not recommended while driving. We MAKING A CALL recommended that you park safely or make use of the steering mounted controls. CALLING A NEW NUMBER CALLING A CONTACT Press this button or make long press on the steering mounted TEL/SRC button.
USING THE TELEPHONE ENDING A CALL CALLING A RECENTLY DIALLED NUMBER Press HANG UP. Press this button or make a long press Make a long press on the steering on TEL/SRC, select "Call list" and mounted TEL/SRC button. confi rm. Select the desired number and confi...
06 USING THE TELEPHONE RECEIVING A CALL An incoming call is announced by a ring and a superimposed display in the screen. A long press on this button or TEL/SRC or a press on HANG UP rejects an "Yes" to accept the call is selected by incoming call.
OPTIONS DURING A CALL * Select " DTMF ring tones " to use the numerical keypad, so as to navigate through the menu of an interactive vocal During a call, press the MODE button server. several times to select display of the telephone screen, then press "OK "...
USING THE TELEPHONE MANAGING PAIRED TELEPHONES CHANGING THE RING TONE Press this button. Press this button. Select " Telephone options" and confi rm. Select " Bluetooth functions". Select " Ring options" and confi rm. Select " List of the paired peripherals" and confi...
Page 283
DIRECTORY - ADDR BOOK Access to the "CONTACTS" menu Press ADDR BOOK. The sorting of the list of contacts depends on the telephone used. Destination: Telephone contacts: from the contacts in the mobile telephone and the SIM from the mobile telephone and the SIM card card (depending on the synchronization options in the (depending on the synchronization options in the Bluetooth menu and the compatibility of the telephone),...
Page 284
DIRECTORY - ADDR BOOK DIRECTORY / SYNCHRONIZING CONTACTS Select "Synchronization options " and confi rm: Press ADDR BOOK twice then select " New contact" to enter a new contact. No synchronization: only the contacts saved in the system (always present). Display telephone contacts: only the contacts saved in the telephone.
DIRECTORY - ADDR BOOK MANAGING CONTACTS Select " Import" to copy one contact to Press ADDR BOOK twice then select the system. "Display contacts " and confi rm. Select " Delete" to delete a contact saved Select the desired contact and confi rm. in the system.
08 RADIO Access to the "RADIO" menu Press RADIO. A long press on LIST refreshes the list of stations received. Go from the list to the menu (left/right). Press or use the rotary control to select the previous or next station in the list. This list can also be displayed by pressing LIST on the steering mounted controls.
RADIO SELECTING A STATION PRESETTING A STATION The external environment (hill, building, tunnel, underground car park...) may interfere with the reception, including in RDS station tracking mode. This phenomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a fault with the audio system. The quality of reception is represented by the number of active waves in this symbol.
Page 288
RADIO DAB * (Digital Audio Broadcasting) ACTIVATE / DEACTIVATE RDS DIGITAL RADIO RDS, if activated, allows you to continue listening to the same Digital radio provides a higher quality reception and also the station by automatic retuning to alternative frequencies. However, graphical display of information for the radio station, by selecting in certain conditions, coverage of an RDS station may not be "Video mode"...
MUSIC MEDIA PLAYERS Access to the "MUSIC MEDIA PLAYER" menu Press MEDIA. Go from the list to the menu (left/right). This list can also be displayed by pressing LIST at the steering mounted controls.
Page 290
09 MUSIC MEDIA PLAYERS CD, MP3 CD / USB PLAYER INFORMATION AND ADVICE The system supports USB mass storage or iPod The audio equipment will only play audio fi les with ".wma, .aac, .fl ac, devices via the USB port (suitable cable not supplied). .ogg and .mp3"...
Page 291
MUSIC MEDIA PLAYERS SOURCES SELECTION OF SOURCE Insert the CD in the player, insert the USB memory The SOURCE or SRC button on the steering mounted controls stick in the USB player or connect the USB allows a direct change to the next media source. peripheral to the USB port using a suitable cable (not supplied) "CD / CD MP3"...
Page 292
MUSIC MEDIA PLAYERS SELECTING A TRACK LIST: List of USB or CD tracks Previous track. or folders Next track. Up or down in the list. Previous folder. Confi rm, next menu level. Next folder. Fast forward. Long press Up one menu level. Fast backward.
MUSIC MEDIA PLAYERS CONNECTING APPLE PLAYERS AUDIO STREAMING ® Connect the Apple player to the USB port using a suitable cable ® (not supplied). Streaming allows audio fi les on your telephone to be played via the Play starts automatically. vehicle's speakers.
Page 294
09 MUSIC MEDIA PLAYERS USING THE AUXILIARY INPUT (AUX) Cable not supplied Connect the portable device (MP3 player…) to the auxiliary JACK Press MEDIA to display the " MEDIA" socket using an audio cable. menu. Select "Activate / Deactivate AUX input "...
11 CONFIGURATION DISPLAY CONFIGURATION Select " Choose colour" and confi rm to select the screen colour harmony and the map presentation mode: day mode, Press SETUP to display the "Confi guration " menu. night mode, automatic day/night mode, according to whether the headlamps are on.
CONFIGURATION "SETUP" MENU VEHICLE SETTINGS Vehicle parameters Press SETUP to display the "Confi guration " menu. Driving aids Rear wiper with reverse gear Automatic parking brake Select " Vehicle parameters " and Speeds memorised confi rm. Vehicle access Driver openings selectivity Adjust the settings one by one.
Page 298
SCREEN MENU MAP MAIN FUNCTION Previous destinations "TRAFFIC" MENU Order/delete journey legs OPTION A Geographic fi lter Divert route option A1 Retain all the messages Chosen destination option A2 Retain the messages Guidance options OPTION B... Around the vehicle Defi ne calculation criteria "Navigation - guidance"...
Page 299
SCREEN MENU MAP "Phone" MENU "Directory of contacts" "RADIO" MENU MENU Dial Display contacts Following waveband Directory of contacts Open Options Telephone options Import Activate / Deactivate TA Ring options Delete Activate / Deactivate RDS Bluetooth functions New contact Audio settings List of the paired peripherals Confi...
Page 300
12 SCREEN MENU MAP "MEDIA" MENU "SETUP" MENU Bass Treble Following media source Display confi guration Loudness Eject USB support Choose colour Distribution Read mode Harmony Driver Normal Cartography All passengers Random Day mode Le-Ri balance Random on all media Night mode Fr-Re balance Repetition...
Page 301
The POIs have not been selected. Select the POIs in the list of POIs. The POIs have not been downloaded. Download the POIs from the website: "http://citroen.navigation.com". The Risk areas audible The audible warning is not active. Activate audible warnings in the Guidance options warning does not work.
Page 302
FREQUENTLY ASKED QUESTIONS QUESTION ANSWER SOLUTION Certain traffi c jams On starting, it is several minutes before the system begins to receive the Wait until the traffi c information is being received along the route are not traffi c information. correctly (display of the traffi...
Page 303
FREQUENTLY ASKED QUESTIONS QUESTION ANSWER SOLUTION Some contacts are The options for synchronizing contacts are synchronizing the contacts Select "Display SIM card contacts" or "Display duplicated in the list. on the SIM card, the contacts on the telephone, or both. When both telephone contacts".
Page 304
FREQUENTLY ASKED QUESTIONS QUESTION ANSWER SOLUTION Some characters in the The audio system does not display some types of characters. Use standard characters to name tracks and media information are not folders. displayed correctly while playing. Playing of streaming fi les The peripheral device connected does not support automatic play.
Page 305
FREQUENTLY ASKED QUESTIONS QUESTION ANSWER SOLUTION In changing the setting The selection of an equalizer setting imposes the balance settings. Modify the balance or equalizer settings to obtain of treble and bass the the desired musical ambience. Modifying one without the other is not possible. equalizer setting is deselected.
Page 306
FREQUENTLY ASKED QUESTIONS QUESTION ANSWER SOLUTION With the engine off, the When the engine is switched off, the system's operating time depends on Start the vehicle's engine to increase the battery system switches off after the battery charge. charge. a few minutes of use. The switch-off is normal: the system switches to economy mode and switches off to prevent discharging of the vehicle's battery.
AUDIO SYSTEM / BLUETOOTH CONTENTS 01 First steps The system is coded in such a way that it will only 02 Steering mounted controls operate in your vehicle. 03 Main menu 04 Audio 05 Using the telephone 06 Audio settings 07 Screen menu map For safety reasons, the driver must only carry out operations which require prolonged attention while the...
FIRST STEPS Audio settings: Display the list of stations received, Select preset radio CD/MP3 tracks or folders. audio ambiences, treble, bass, station. loudness, distribution, left/right Long press: managing the Volume balance, front/rear fader, automatic Long press: store a classifi cation of MP3/WMA fi les / On / Off.
STEERING MOUNTED CONTROLS Rotation Radio -automatic selection of next / previous frequency. Media: previous / next track. Press then rotation: access to 6 preset stations. Change the audio source. TEL button (short press): Accept an incoming call Call in progress: access to telephone menu: hang up, secret mode, hands- free mode.
MAIN MENU > SCREEN C "Bluetooth connection": " Multimedia ": Media parameters, Connections management, Search Radio parameters. for a device. "Personalisation-confi guration": Defi ne the "Telephone": Call, Directory vehicle parameters, Choice of language, Display management, Telephone confi guration, Choice of units, Date and time management, Hang up.
Page 311
RADIO SELECTING A STATION The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking Press LIST to display the list of stations mode. This phenomenon is normal in the propagation of radio received in alphabetical order.
AUDIO RECEIVING TA MESSAGES The TA (Traffi c Announcement) function gives priority to TA alert RDS, if displayed, enables you to continue listening to the same messages. To operate, this function needs good reception of a station by automatic retuning to alternative frequencies. However, radio station transmitting this type of message.
Page 313
AUDIO DISPLAY RADIO TEXT Radio text is information transmitted by the radio station related to the current programme or song. SCREEN C With the radio displayed on the screen, press OK to display the contextual menu. Select " RadioText (TXT) display" and confi...
Page 314
04 AUDIO AUDIO CD PLAYING A CD Insert 12 cm diameter circular compact discs only. Press LIST to display the list of tracks Some anti-pirating systems, on original discs or CDs copied using a on the CD. personal recorder, may cause faults which are no refl ection on the quality of the original player.
Page 315
AUDIO CD, USB INFORMATION AND ADVICE On a single disc, the CD player can read up to 255 MP3 fi les spread over 8 directory levels. However, it is recommended that this be kept The audio system will only play fi les with extension ".mp3" or ".wma" to 2 levels so as to limit the time taken to access and play the CD.
Page 316
AUDIO CD, USB PLAYING A COMPILATION Press one of the buttons to select the next or previous track. Insert an MP3 compilation in the CD player or connect a memory stick to the USB port, directly or via an extension lead. The system creates playlists (temporary memory) the creation time Press one of the buttons to select the next or previous folder in the order...
Page 317
AUDIO USB MEMORY STICK - FILE CLASSIFICATION Select a line in the list. Make a long press on LIST or press MENU , select " Multimedia ", then " Media parameters" and fi nally "Choice of track listing " to display the different classifi...
04 AUDIO APPLE PLAYERS or ® PORTABLE PLAYER The audio fi les on a Mass Storage portable player * can The Apple ® ® player must be updated regularly for the best be heard through the vehicle's speakers by connecting connection.
Page 319
AUDIO AUXILIARY SOCKET (AUX) AUXILIARY JACK SOCKET The auxiliary Jack socket permits the connection of a portable Press the SOURCE or SRC button non-mass storage device or an Apple ® ® player if not recognised several times in succession and select by the USB port.
04 AUDIO STREAMING - PLAYING AUDIO FILES PLAY MODE VIA BLUETOOTH The play modes available are: Depending on the compatibility of the phone Normal: the tracks are played in order, depending on the classifi cation of the selected fi les. Random: the tracks in an album or folder are played in a Streaming allows music fi...
For safety reasons and because they require prolonged attention on the part of the driver, the operations for pairing of the Bluetooth mobile telephone with the Bluetooth hands-free system of your audio system must be carried out with the vehicle stationary and the ignition on. Visit www.citroen.co.uk for more information (compatibility, additional help, ...). Activate the telephone's Bluetooth function and Select "...
05 USING THE TELEPHONE Accept the connection to the telephone. In some cases, the reference number of the telephone or the Bluetooth address may appear instead of the name of the telephone. A message appears in the screen to confi rm the result of the connection.
Page 323
USING THE TELEPHONE MANAGING CONNECTIONS The telephone connection automatically includes hands free operation Indicates that a device is connected. and audio streaming. The ability of the system to connect to just one profi le depends on the Indicates connection of the audio steaming profi le. telephone.
05 USING THE TELEPHONE MAKING A CALL - RECENTLY CALLED MAKING A CALL - DIALLING NUMBERS * To display the "TELEPHONE " menu: To display the " TELEPHONE" menu: Make along press on SOURCE or Make a long press on SRC/TEL. SRC.
Page 325
USING THE TELEPHONE MAKING A CALL - RECEIVING A CALL FROM THE DIRECTORY To display the " TELEPHONE " menu: Make a long press on SRC/TEL. Or, press the dial to display the An incoming call is announced by a ring and a superimposed display in the multifunction screen.
05 USING THE TELEPHONE Secret - Mute MANAGING CALLS (so that the caller cannot hear) In the contextual menu: select " Micro OFF " to switch off the During a call, press OK to display the microphone. contextual menu. deselect " Micro OFF" to switch the microphone on.
Page 327
USING THE TELEPHONE Interactive voice response From the contextual menu, select "DTMF tones " and confi rm to use the digital keypad to navigate in the interactive voice response menu. Consultation call From the contextual menu, select "Switch" and conform to return to a call left on hold.
Page 328
05 USING THE TELEPHONE DIRECTORY The telephone directory is sent to the system, depending on the Select " Directory" to see the list of compatibility of the telephone. contacts. The directory is provisional and depends on the Bluetooth connection. Contacts imported from the telephone to the audio system directory To modify the contacts saved in the are saved in a permanent directory visible to all, whatever the system, press MENU then select...
07 SCREEN MENU MAP SCREEN C MAIN FUNCTION OPTION A By folders Directory management Consult an entry Option A1 By artists Delete an entry Option A2 By genres OPTION B Delete all entries By playlists Telephone management Radio parameters Multimedia Telephone status Media parameters Telephone...
Page 331
SCREEN MENU MAP Personalisation-configuration Defi ne the vehicle parameters Interior lighting Display confi guration Welcome lighting Choice of units Access to the vehicle Follow-me-home headlamps Plip action Date and time adjustment Choice of language Display parameters Driving position setting Brightness Unlocking boot only Choice of sounds Driving assistance...
FREQUENTLY ASKED QUESTIONS The following tables contain answers to the most frequently asked questions. QUESTION ANSWER SOLUTION There is a difference in For optimum sound quality, the audio settings (Volume, Bass, Treble, Check that the audio settings (Volume, Bass, sound quality between Ambience, Loudness) can be adapted to the different sound sources, Treble, Ambience, Loudness) are adapted to the different audio...
Page 333
FREQUENTLY ASKED QUESTIONS QUESTION ANSWER SOLUTION The quality of reception The vehicle is too far from the transmitter used by the station listened Activate the RDS function to enable the system of the radio station to or there is no transmitter in the geographical area through which the to check whether there is a more powerful listened to gradually vehicle is travelling.
Page 334
FREQUENTLY ASKED QUESTIONS QUESTION ANSWER SOLUTION The CD is ejected The CD is inserted upside down, is unplayable, does not contain any Check that the CD is inserted in the player the automatically or is not audio data or contains an audio format which the player cannot play. right way up.
Page 335
FREQUENTLY ASKED QUESTIONS QUESTION ANSWER SOLUTION A telephone connects Automatic connection overrides manual connection. Modify the telephone settings to remove automatic automatically, connection. disconnecting another telephone. The Apple player is The Apple player is of a generation that is not compatible with the USB. Connect the Apple player to the AUX Jack socket ®...
Page 336
Index Alphabetical index - Visual search...
Page 338
ABS ............. 173 Automatic headlamp Capacity, fuel tank ........68 Accessories ........55, 101, 219 dipping ..........32, 143 CD ............288, 312 Automatic illumination CD MP3 ........288, 313, 314 Accessory position........55, 101 Accessory socket, 12V ......84, 85 of headlamps ........139, 142 Central locking ..........52 Adjusting headlamps ........146 Automatic operation of hazard...
Page 346
Interior Front seats 74-78 head restraints heated manual electric massage Mats Airbags 179-182 Boot fittings Warning triangle Interior fittings Cigarette lighter / accessory socket Deactivating the passenger's front airbag 160, 180 Rear seats 79-81 ISOFIX child seats 164-166 Seat belts 176-178 Rear armrest Ski flap...
Page 347
Visual search Maintenance - Technical data 12V battery 210-212 Load reduction, economy mode Checking levels 229-231 Engine compartment fuses 207, 209 Under the bonnet, petrol Under the bonnet, Diesel brake fluid Petrol engines power steering fluid Diesel engines coolant screenwash/headlamp wash fluid Checking components 232-234 air filter...
Page 355
This handbook describes all of the equipment Automobiles CITROËN declares, by application available in the whole range. of the provisions of the European regulation (Directive 2000/53) relating to End of Life Vehicles, Your vehicle will be fi tted with some of this that it achieves the objectives set by this regulation equipment described in this document, depending and that recycled materials are used in the...
Need help?
Do you have a question about the DS5 and is the answer not in the manual?
Questions and answers