Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for UPPAbaby 70
Summary of Contents for UPPAbaby 70
- Page 1 Infant Car Seat and Base Rear-facing Only 4-35 lbs...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Read all instructions before use of the infant car seat. Keep instruction manual for future use. (Storage pocket located on underside of infant carrier.) BEFOrE yOu BEgiN CERTIFICATION USE RECOMMENDATIONS REGISTRATION NOTICE OF EXPIRATION WARNINGS + GENERAL SAFETY INSTRUCTIONS iNFANT SEAT FEATurES OVERVIEW OF bASE OVERVIEW OF INFANT CARRIER... -
Page 3: Certification
CArriEr iNSTALLATiON WiTH VEHiCLE SEAT BELT Vehicle Safety Standards (FMVSS). LEVELING THE CARRIER DETERMINING bEST INSTALLATION METHOD This child restraint is certified for aircraft use. UPPAbaby and LAP/SHOULDER bELT EUROPEAN ROUTING METHOD the Federal Aviation Administration (FAA) strongly urge you to INSTALLATION WITH LOCkING CLIP... -
Page 4: Registration
CArriEr BASE child restraint in a seating position with side airbags. UPPAbaby reserves the right to make design changes and improvements to any of our products as part of our commitment to innovation. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... - Page 5 • NEVEr hang strings on or over the carrier or secured in the harness. attach to handle. • NEVEr place items with a string around a child’ s neck, such as hood strings, pacifier cords, etc. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual...
- Page 6 DO NOT • take child out of the child restraint while the vehicle is moving. DO NOT • allow children to play with this child restraint. It is not a toy. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual...
-
Page 7: Overview Of Base
(page/pagina 19) VeHICLe BeLT LOCK-Off Lap Belt Only (CLOSed) Banda Horizontal del Cinturón de Seguridad (page/pagina 19) LATCH FRONT OF VEHICLE Parte Trasera del Vehículo STORAge LeVeL ANgLe INdICATORS (2) AdjuSTmeNT fOOT UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 8: Overview Of Infant Carrier
INfANT INSeRT TONgueS (2) (ReCOmmeNded CROTCH BuCKLe BeTweeN 4-8 LBS) POSITIONS (2) HARNeSS VeHICLe ReLeASe SeAT BeLT LOCKINg CLIP HARNeSS HARNeSS AdjuSTeR BuTTON guIdeS (2) (uNdeRSIde Of AdjuSTeR STRAP HOLdeR CARRIeR fABRIC) STRAP UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 9: Choosing A Vehicle Seating Location
Tethers for CHildren) or the Vehicle Seat Belt. LOWEr ANCHOrS VEHiCLE SEAT BELT Lap/Shoulder belt Lap/Shoulder belt Lap belt Only rETrACTOr European Standard Routing Method Routing Method Routing Method (pg. 26) (pg. 26) (pg. 26) UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 10: Overview Of Latch
If spacing between the lower anchors is greater than 22" or if the seating position is not approved by the vehicle manufacture then use the vehicle seat belt for installation. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 11: Unsafe Vehicle Seat Belt Systems + Seating
Door mounted inflatable DO NOT use this child restraint with the following vehicle seats: Vehicle seats that face rear of the vehicle Vehicle seats that face side of the vehicle UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 12: Base Installation With Latch
STEP 1: Press the red button on the LATCH connector while pulling the connector off the vehicle anchor STEP 2: Store LATCH connectors in designated housing found on each side of the base. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 13: Leveling Base
If you are having trouble achieving a secure installation in the center Securing the Base (Lap Belt Only seat position, please install using Installation - pg. 24, steps 4B-6B). the locking clip (pg. 28). UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 14: Safety Check
STEP 3: Remove seat belt. has not slipped down into the belt path and is as close as possible to the topside of the lock-off where the door hinges. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 15: Leveling The Carrier
Lap/Shoulder Belt Standard Routing Method (pg. 29). method. (proceed to pg. 29) LAP ONLy METHOD: No shoulder belt is used. This method applies to vehicles with no shoulder belt and aircraft. (proceed to pg. 30) UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 16: Installation With Locking Clip
Unbuckle the belt without letting the webbing slip. STEP 2: Thread the locking clip onto both lap and shoulder belts 1inch from the latch plate. STEP 3: Re-buckle the vehicle belt. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 17: Lap Belt Only Routing Method
Only the carrier is certified for aircraft use. • Seating position is permitted by both UPPAbaby and your vehicle • Inflatable seat belts are NOT compatible manufacturer for use with the type of Vehicle Seat belt. -
Page 18: Infant Insert (Recommended 4-8 Lbs)
NOTE: Never use after market products with this child restraint, unless approved by UPPAbaby. HArNESS BuCkLE POSiTiONiNg Always position the buckle closest to the child. If the child is on top of the buckle in the inner position, then adjust the buckle to the outer position. -
Page 19: Securing Your Child
PiNCH TEST HArNESS SHOuLD BE SNug. Pinch harness webbing at child’s shoulders. If you can pinch webbing, the harness is too loose and should be tightened. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 20: Attaching Infant Carrier To Base
These products have not been STEP 2: Lift carrier off base. tested by UPPAbaby and therefore are not approved for use with this child restraint. UPPAbaby MESA Instruction Manual... -
Page 21: Important Checks
CArriEr FrOM Cruz FrAME aged 12 and under. • NEVER use add-on products with this child restraint, unless approved by UPPAbaby. • NEVER place in front of an active airbag. • Install using LATCH or the vehicle seat belt, NOT bOTH. -
Page 22: Fitting Adapters To Vista Frame
If the indicator symbol is red then the adapter is not carry handle. secure. Remove the adapter and try fastening it again. STEP 2: Lift the carrier off the adapters on VISTA frame. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 23: Sip Cover Removal
STEP 3: Remove (4) plastic tabs from front sides of carrier. STEP 4: Loosen fabric from front end of carrier and free fabric from around harness release button housing. STEP 5: Raise SIP to highest position and pull back fabric panel. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 24: Seat Fabric Installation
STEP 3: Insert the (6) upper plastic tabs into slots in carrier. STEP 4: Feed buckle through buttonhole in seat fabric. STEP 5: Install buckle cover tucking tabs through buttonhole. STEP 6: Raise the SIP and place buckle in buckle storage pockets. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 25: Sip Cover Installation
STEP 3: Secure SIP cover tightly around SIP ears. STEP 9: Wrap fabric around front lip and install (4) plastic tabs. STEP 10: Reconnect harness adjuster strap. UPPAbaby MESA Instruction Manual UPPAbaby MESA Instruction Manual... -
Page 26: Cleaning
Conditions may with mild detergent. before re-use or vary. uPPAbaby will not ship replacement or repair parts out of the country of purchase. storage. uPPAbaby will provide replacement parts or conduct repairs as determined fitting by the company. - Page 27 60 Sharp Street, Hingham, mA 02043 781.413.3000 www.uppababy.com model 0070 | Version 2 CRuZ, meSA, VISTA and uPPAbaby are trademarks and/or registered trademarks of monahan Products LLC. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the 70 and is the answer not in the manual?
Questions and answers