Yamaha YZ250T1 Owner's Service Manual page 215

a
EC564101
Bearing and bearing race
EC565000
ASSEMBLY AND INSTALLATION
EC5651A0
Under bracket
NOTE:
Apply the lithium soap base grease on the dust
seal lip and bearing inner circumference.
NOTE:
Apply the lithium soap base grease on the bear-
ing and bearing race cover lip.
NOTE:
Apply the lithium soap base grease on the bear-
ing, the portion a and thread of the steering
shaft.
1
5-50
STEERING
1. Wash the bearings and bearing races with a
solvent.
2. Inspect:
9 Bearing 1
9 Bearing race
Pitting/Damage ¡ Replace bearings and
bearing races as a set.
Install the bearing in the bearing races. Spin
the bearings by hand. If the bearings hang up
or are not smooth in their operation in the
bearing races, replace bearings and bearing
races as a set.
1. Install:
9 Bearing (lower) 1
2. Install:
9 Bearing race
9 Bearing (upper) 1
9 Bearing race cover 2
3. Install:
9 Under bracket 1
CHAS