Yamaha YZ250T1 Owner's Service Manual page 194

FRONT FORK
Adjuster
1. Drain the outer tube of its front fork oil at its
top.
2. Loosen:
9 Adjuster 1
3. Remove:
9 Adjuster 1
NOTE:
9While compressing the inner tube 2 , set the
cap bolt ring wrench 4 between the inner tube
and locknut 3 .
9Hold the locknut and remove the adjuster.
cC
Do not remove the locknut as it may go
into the damper assembly and not be taken
out.
Cap bolt ring wrench:
YM-01501/90890-01501
EC553201
Inner tube
1. Remove:
9 Dust seal 1
9 Stopper ring 2
Using slotted-head screwdriver.
cC
Take care not to scratch the inner tube.
2. Remove:
9 Inner tube 1
Oil seal removal steps:
9 Push in slowly a the inner tube just be-
fore it bottoms out and then pull it back
quickly b.
9 Repeat this step until the inner tube can
be pulled out from the outer tube.
5-29
CHAS