Subscribe to Our Youtube Channel
Related Manuals for INSTEON 2342-232
Summary of Contents for INSTEON 2342-232
-
Page 9: Quick Start Guide
Charging LED will turn off once the battery is fully charged (approximately one hour). Slide the power switch to the ON position. Note: Mini Remote requires an INSTEON dual-band or RF device to 4 Scene Buttons communicate with other devices on your INSTEON network. - Page 10 USB Type A to Micro-B device that charges via USB cable 2342-222/2444A2WH4, 2342-432, 2342-532 Rev. 2/20/2013 8:47 AM / See Owner’s Manual for Warranty Information. Protected under U.S. and foreign patents (see www.insteon.com/patents) © Copyright 2013 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 866-243-8022...
- Page 11 Mini Remote ® INSTEON Remote Control Keypad, 4 Scene (formerly RemoteLinc 2) Owners Manual 2342-232, 2444A2WH4 (US) 2342-432 (EU) 2342-532 (AUS/NZ) Page 1 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM...
-
Page 12: Table Of Contents
Factory Reset ............................11 Specifications ............................12 Troubleshooting ............................13 Certification and Warranty ........................14 FCC & Industry Canada Compliance Statement ..................14 Limited Warranty ............................. 15 Limitations ............................16 Page 2 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM... -
Page 13: About Mini Remote
About Mini Remote Mini Remote is the smallest and most versatile INSTEON remote control in the world. The 4 scene controller can easily be reconfigured to give you toggle control of up to 8 scenes and/or devices. Mini Remote can be:... -
Page 14: Required Accessories
USB power adapter. • If the INSTEON device you intend to control does not receive RF signals (i.e., power line only), you will need at least one dual-band INSTEON device to convert the RF signals to power line signals. -
Page 15: Optional Accessories
Turn lights on when you arrive and off as you leave USB Power Adapter (2444B6) • For use with Mini Remote USB Charging Cable and any other device that charges via USB cable Page 5 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM... -
Page 16: Getting Started
Remove Mini Remote (Button) as a Controller If you are no longer going to use an INSTEON responder that is a scene responder of Mini Remote, it is very important that you remove its scene membership. Otherwise, Mini Remote will retry every scene command repetitively, thus creating delays and shortening battery life. -
Page 17: Using Mini Remote
Note: Devices in scenes that respond to the scene trigger by turning off do not respond to scene dim and brighten. Devices in scenes that only support On/Off (such as switches and relays) do not respond to scene dim and brighten. Page 7 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM... -
Page 18: Led Behavior
Remove Multiple Responders from a Scene (Multi-Unlink) 1) Tap the Mini Remote scene button from which you wish to remove the responder (on or off buttons will both work) Page 8 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM... -
Page 19: Change Button / Scene Configuration (E.g., Change To 8 Button Mode)
7. To confirm the configuration, tap the top left button on Mini Remote several times LED will flash as follows Flash Pattern Configuration Red every tap 4 scene Green every tap 8 scene Non-Toggle (Always On) Alternating Green / Red 8 scene Toggle Page 9 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM... -
Page 20: Turn Led Off (Or Back On)
5) Press the appropriate button for the desired button/scene configuration Desired Beeper Mode Button to Press Off (Default) Top Row, Left Side Top Row, Right Side Mini Remote will double-beep and its LED will turn off Page 10 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM... -
Page 21: Beeper Behavior
Keypad Configuration Setup Mode Factory Reset The factory reset procedure clears all settings from Mini Remote including INSTEON scenes. 1) If possible, unlink (remove) all scene responders prior to performing factory reset 2) Turn Mini Remote off (slide power switch to left) 3) Press &... -
Page 22: Specifications
Fast On Fast Off Software Configurable X10 Support None Operation LED Type Two-color: Green and Red LED during Use Green Flash Once On (sent) Bright Fast-On Red Flash Once Page 12 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM... -
Page 23: Troubleshooting
Make sure phases are bridged, add additional The INSTEON signal may not be INSTEON devices and/or move around existing getting to the “vicinity” of Responder INSTEON devices Page 13 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM... -
Page 24: Certification And Warranty
Re-orient or relocate the receiving antenna of the device experiencing the interference Page 14 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM... - Page 25 Seller’s liability with respect to this product. For repair or replacement during the warranty period, call the INSTEON Gold Support Line at 866-243-8022 with the Model # and Revision # of the device to receive an RMA# and send...
- Page 26 You may also have other legal rights that may vary from state to state. Protected under U.S. and foreign patents (see www.insteon.com/patents) © Copyright 2013 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 866-243-8022, www.insteon.com...
Need help?
Do you have a question about the 2342-232 and is the answer not in the manual?
Questions and answers