Standards Supported; Physical Specifications; Operating Environment - IBM Emulex At-A-Glance Manual

Based on Emulex OneConnect technology and includes FCoE support as a future feature entitlement

upgrade
Hardware parity, CRC, ECC, and other advanced error checking

PCI Express 2.0 x8 host interface

Low-profile form-factor design

IPv4/IPv6 TCP, UDP checksum offload

VLAN insertion and extraction

Support for jumbo frames up to 9000 bytes

Preboot eXecutive Environment (PXE) 2.0 network boot support

Interrupt coalescing

Load balancing and failover support

Deploy and manage this and other Emulex OneConnect-based adapters with OneCommand

Manager

Standards supported

The following IEEE standards are supported:
IEEE 802.3ae (10Gb/s Ethernet XAUI)

IEEE 802.1q (VLAN)

IEEE 802.1Qbb (Priority flow control)

IEEE 802.1Qaz (ETS and Congestion Management)

IEEE 802.1p (QoS/CoS)

IEEE 802.3ad (Link Aggregation)

IEEE 802.3x (Flow Control)


Physical specifications

The adapter has the following physical specifications:
Height: 167 mm (6.60 in)
Width: 69 mm (2.71 in)
Depth: 17.3 mm (0.69 in)

Operating environment

This adapter is supported in the following environment:
Temperature:

Operating: 0° to 55° C (32° to 131° F)

Non-operating: -40° to 70° C (-40° to 158° F)

Humidity: 5 to 95%, non-condensing

Emulex 10Gb Virtual Fabric Adapter for IBM System x 3