Changing From Desktop To Tower Configuration - HP EliteDesk 800 G1 Desktop Mini Hardware Reference Manual

Busines pc
Hide thumbs Also See for EliteDesk 800 G1 Desktop Mini:
Table of Contents

Advertisement

Changing from desktop to tower configuration

The computer can be used in a tower orientation with an optional tower stand that can be purchased
from HP.
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as a USB flash drive, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
as long as the system is plugged into an active AC outlet. You must disconnect the power cord
to avoid damage to the internal components of the computer.
5.
Orient the computer so that its right side is facing up and place the computer in the optional
stand.
NOTE:
optional tower stand.
6.
Reconnect the power cord and any external devices, then turn on the computer.
NOTE:
remains clear and free of obstructions.
7.
Lock any security devices that were disengaged when the access panel was removed.
10
Chapter 2 Hardware upgrades
Regardless of the power-on state, voltage is always present on the system board
To stabilize the computer in a tower orientation, HP recommends the use of the
Ensure at least 10.2 centimeters (4 inches) of space on all sides of the computer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EliteDesk 800 G1 Desktop Mini and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Prodesk 600 g1 desktop mini

Table of Contents