Removing and installing components during servicing
Installing the hard disk
New hard disks are delivered with a shock absorber kit; this may either be already
attached to the hard disk or require attaching prior to installation.
► If necessary, attach the shock absorber kit to the underside of the new hard disk.
1
2
► Attach the hard disk connector to the hard disk (1).
► Carefully put the hard disk into the hard disk compartment (2).
2
2
1
► Place the cover into position, following the direction of the arrow (1).
► Secure the cover with the screws (2).
► Reinstall the battery (see
"Installing the battery", Page
17).
► Turn the notebook the right way up and place it on a flat surface.
► Reconnect the cables that you disconnected previously.
A26391-K198-Z121-1-7619, edition 2
29