Bar And Chain Combinations; Saw Chain Filing And File Gauges - Jonsered CS 2152 EPA III Operator's Manual

Jonsered chainsaw operator's manual

Hide thumbs

Table Of Contents

Table of Contents

Recommended original and replacement bar and chain combinations

Following is a list of recommended cutting equipment for the Jonsered chain saw models CS 2152 and CS 2153. The

combinations of power head, bar and chain have been tested and found to be in accordance with the kickback and

vibration requirements of ANSI B 175.1–2000.

The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the

corresponding maximum nose radius of a hard nose.

The following list is the chain saw manufacturers recommendations. There may be other combinations available, which

will also achieve kickback reduction.

As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.

For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of

sprocket teeth may be considered to have equivalent kickback energy. A hard nose bar having the same length and nose

radius as a sprocket-nose bar may be considered to have equivalent or less kickback energy than the sprocket-nose bar.