Getting Started; Switching On And Off - PURE Evoke-2XT User Manual

Getting started

You've unpacked the box - here's how to quickly get up and running using your EVOKE-2
1
Fully extend the telescopic aerial, connect the mains adapter and plug in to your power supply or fit six size 'C'
batteries or the ChargePack C6 available from PURE.
The LCD lights up and the display shows 'PURE EVOKE-2
the progress of an autotune to find the DAB stations available in your area. The stations found will be stored in
alphanumeric order and the first station on the list will be selected.
2
Adjust the Volume and Tone knob if required.
3
Turn the Tune knob to see all the stations available and push to change to another station.
4
Press the Info button and repeat to cycle through the optional DAB display modes.
5
Press the DAB/FM/AUX button to change to FM mode and listen to FM stations and again to listen to a
connected auxiliary device such as an iPod, CD or MiniDisc player.

Switching on and off

To switch on your EVOKE-2
To switch your EVOKE-2
small amount of power.
Note To switch off your EVOKE-2
saved.
4
XT
press the Standby button.
XT
from on to standby press the Power button. In standby state your EVOKE-2
XT
completely unplug the power adapter. Your preset stations and other settings will be
XT
.
XT
' and a progress bar on the bottom line indicates
XT
uses a very