Overview Diagrams; Front Panel - Controls - PURE Evoke-2XT User Manual

Overview diagrams

Front panel - controls

Press to turn backlight on
Press to switch between on and standby using mains.
Press to switch between on and off using batteries.
Press and repeat to change the text
shown on the bottom of the display
2
from low (more bass)
to high (more treble)
Volume
Turn to adjust
the volume
Volume
Light
1
for 10 seconds
4
Light
Standby
Standby
Info
Press and use Tune to set
a countdown timer which
will sound an alarm after
(from 1 min to 23 hrs 59 mins)
Tone
Turn to adjust tone
Tone Tune
2 3
5 6
Menu
Press to access and exit setup menu options,
Info Menu
turn the Tune knob to scroll through
and push to select an option
Timer DAB/FM/AUX
DAB/FM/AUX
Press to switch between
Timer
DAB, FM and AUX modes
the period you set
Tune
Turn to scroll through and then press to select stations
and menu options. Push in DAB mode to see signal strength,
push in FM mode to change the tuning method.
Presets (1-6)
Press and hold for 2 seconds
to store a preset.
Press to listen to a preset.