Power On; Installing Flexplot And The Control Center - Ioline FJ Printer Service Manual

28 Ioline FJ Printer & StudioJet Service Manual
Caution
Keep hands and loose
clothing away from all
moving parts of the
printer. Make sure the Service
Station area is not obstructed.

Power on

Turn on the computer and the printer to make sure they both work.
The printer power switch is located next to the power cord on the
back of the machine, behind the keypad. When the printer is pow-
ered up, the carriage will move toward the left side of the machine,
then return to the opposite side to park in the Service Station. The
OK light will turn red and the Square light will turn green on the
front panel after the start-up process has fi nished.
Installing FlexPlot and
the Control Center
The FJ Printer includes two software interfaces: FlexPlot and the
Control Center. FlexPlot will import and queue marker fi les from
many design programs to optimize production operations. The
Control Center is an interface for adjusting parameters to optimize
printer performance. The printer comes with a CD-ROM which has
Microsoft Windows 98/2000/XP versions of the programs as well
®
as PDF user guides and the required Adobe
1. Power on the computer and Windows
2. Insert the Ioline CD-ROM into the CD-ROM drive (usually D:).
3. The installation program should start automatically. If it does
not:
a. Select the Start button.
b. Choose Run.
c. Type D:\IOSETUP (substitute the correct letter if the CD-
ROM drive letter is not D:) and Click OK.
4. Follow the instructions that appear on the screen.
5. The FlexPlot User Guide has details on using the FlexPlot
software. In this manual, see the section The Control Center for
more details about the Control Center software.
Acrobat reader.
® ®
.
®