Dive Planning Simulator [2 Simplan] - Suunto Cobra Instruction Manual

Fig. 4.19. Dive Planning
Simulator mode. [2 SIMPLAN].
SURF
TIME
Fig. 4.20. Selected Dive
Planning Simulator mode. Add
desired surface interval
increment (to present shown
surface interval) by pressing
TIME and PLAN buttons. This
display is only shown for
repetitive dives.
DIVE
NO DEC TIME
Fig. 4.21. Dive Planning
Simulation.
48
4.2.2. DIVE PLANNING SIMULATOR
[2 SIMPLAN]
The Dive Planning Simulator mode shows you the
present no-decompression limits. In this mode, you
are also able to add the desired surface interval
SELECT
increment to present surface interval time, which
allows you to plan your dives in advance.
This mode is also used to add the desired surface
intervals for dive simulations. Add the desired surface
interval increment to present surface interval by
pressing the arrow down (TIME) and arrow up
(PLAN) buttons.
To enter the Dive Planning Simulator mode select
MODE- 2 SIMUL- 2 SIMPLAN (Fig. 4.19.).
NOTE! This display is only shown for repetitive dives.
NOTE! The Dive Planning Simulator mode is
disabled in Gauge mode and in Error mode (see
section 3.9. "Error Conditions").
OK
MAX
QUIT