Shredder Blade - Echo ES-230 Shred N Vac Operator's Manual

20
3. Remove spark arrestor covers (A, B), gasket (C), and spark
arrestor screen (D) from muffler. Replace screen if plugged with
carbon deposits.
4. Install spark arrestor screen, gaskets, and cover.
5. Loosely reassemble engine cover then recoil starter and side
handle.
6. Tighten all screws securely.
Cylinder Exhaust Port
Level 3.
IMPORTANT
The cylinder exhaust port must be inspected and cleaned of excess
carbon every 3 months or 90 hours of operation in order to maintain
this engine within the emissions durability period. ECHO strongly
recommends that you return your unit to your ECHO dealer for this
important maintenance service.

SHREDDER BLADE

Level 1.
WARNING
Never remove vacuum tube or open fan guard when SHRED 'N'
®
VAC is running or serious personal injury may result.
wear heavy-duty work gloves when working in shredder blade area.
1. With engine stopped, remove spark plug wire, loosen clamp and
pull vacuum tube from unit.
2. Remove accumulated debris from blade and inspect for damage.
IMPORTANT
Do not operate SHRED 'N' VAC
broken. Return unit to Echo Dealer for service.
3. Install vacuum tube. Refer to "Installing Vacuum Tube" (page 9) in
assembly section for correct assembly procedures.
DANGER
Always
®
if shredder blade is damaged or
D
C
B
A