Figure 13. "Enable Devices" Page - ABB iPAQ User Manual

5.1.1.2 Disable devices
The administrator can choose which devices the user can get in connection with: the user cannot detect new devices.
By pressing the "Disable devices" button the "Personalize" button appears that, if selected, opens a page with the
following options:
•
Enable All: access to all of the devices available in the database is enabled.
•
Disable All: access to all of the devices available in the database is disabled.
•
Device List: list of the devices available in the database.
In the devices list it is possible to select each device for which the user will be enabled:
From the toolbar it is possible to select the following actions:
• Back
• Cancel
• Help
The administrator makes the changes and then confirms through the "Confirm" button: the new data will be saved.
The data are permanently saved only after pressing the "Save" button in the "User management" page. In the "Disable
devices" page a window appears that explains this procedure.
ABB
ABB SACE

Figure 13. "Enable devices" page

: the "User management" page is returned without saving any changes; the user is
warned the changes have not been saved and is given the chance to save them.
: the changes are cancelled.
SACE SD-Pocket 1SDH000503R0002 L3104 14/25