Olivetti PR2 Service Manual page 63

RESET WITH Y - N
EJECT
PRINTER
REPLY SYNCRONIZED:
STATUS REQUEST: NO WAIT -
Parameters set only if the horizontal magnetic unit is present
OPTION HORIZONTAL MSRW
STANDARD DIN/ISO - ANSI
- IBM 3604
(Only with STANDARD = IBM 3604)
END- C - F
SENTINEL
DISPLACEMENT STANDARD / +10 / +20
DUPLICATE Y - N
DOUBLE Y - N
FIELD CHECK
RETRY 3 - 1
STRIPE NORMAL -
HANDLING FAST
(Only with vertical magnetic option)
OPTION VERTICAL MSRW
DENSITY 80 BPI - 160 BPI
SIDE L - R
RETRY 3 - 1
SAVE Y - N
PARAMETERS
683311W
Y - N
WAIT
Service Manual
Sets (Y) or not (N) the automatic ejection of the
document in the machine every time the printer makes
a general reset.
DSR (Data Send Ready) management in transmission.
Determines the timing of the status reply upon reception
of an ESC j command. By selecting NO WAIT, the
reply will be provided as soon as possible and
simultaneously with the execution of a print job or
paper movements. By selecting WAIT, the status
reply will be provided at the end of the print job.
Informs that the option is installed. If the MICR option
is present, + MICR will be written alongside
"..........MSRW".
Sets magnetic standard.
Sets the closing code.
Sets the magnetic strip position in mm.
Sets or not the field duplication.
Sets or not the double field check.
Indicates the number of read attempts before indicating
an error.
Set a fast or normal magnetic stripe handling.
Informs that the option is installed.
Sets the density of data impact in bits per inch.
This selection can only be made with the vertical
magnetic unit option installed. Allows the HW
management of the option.
Indicates the number of read attemps before indicating
an error.
Stores (Y) or not (N) the arrangements selected in this
set-up section.
4-11